The KQSN80-N13/200 is an API 610 BB2 single-stage, double-suction, horizontally split between-bearing centrifugal pump, engineered by Shanghai Kaiquan (partnered with HYRIG for Iran market) specifically for clean process water service in Iran’s refineries, petrochemical plants, and industrial facilities. It serves as a benchmark domestic alternative to the Sulzer BBS 32-200, offering identical dimensions, CFD‑optimized hydraulics, enhanced corrosion resistance, and long‑life construction.
Designed for Iran’s 50Hz power grid (380V) and fully compliant with NIOC/POGC safety standards, this pump addresses the core characteristics of clean process water: low viscosity (0.8–1.0 mPa·s at 20°C), solids‑free (suspended solids ≤10 ppm), wide temperature range (ambient to 150°C), and trace chlorides (≤500 ppm) in coastal installations. With a temperature range -20°C to +150°C, 304/316L stainless steel wetted parts, hydraulic efficiency ≥78% (3‑5% higher than Sulzer), and API 682 cartridge mechanical seal (leakage ≤5 ppm), the KQSN80-N13/200 delivers energy‑efficient, reliable, low‑maintenance process water transfer – ideal for Iran’s coastal high‑salt environments, high‑temperature utility water in large petrochemical complexes, and 8,000+ hour annual operation requirements.
Clean process water is a critical utility in Iran’s petrochemical industry, used for equipment cooling, process washing, steam generation, and plant service water. Key demands:
Clean, solids‑free – suspended solids ≤10 ppm, low viscosity
Wide temperature range – ambient to 150°C (high‑temperature process water accounts for >40% of applications)
Trace chlorides (≤500 ppm) – especially in Persian Gulf coastal plants – requires basic corrosion resistance
High reliability – annual operation ≥8,000 hours, 24/7 continuous duty
The KQSN80-N13/200 is optimized accordingly:
-20°C to +150°C wide temperature range – covers both winter ambient water in northern Iran and high‑temperature boiler feed / reactor cooling water
304 stainless steel wetted parts (standard) – resists trace chlorides; optional 316L or duplex for higher chloride resistance
CFD‑optimized hydraulic design – efficiency ≥78% reduces energy cost for continuous operation
Low NPSHr ≤3.5m – prevents cavitation in high‑temperature water service
Horizontally split casing – easy maintenance without disturbing piping
| Parameter | Value | Advantage over Sulzer BBS 32-200 |
|---|---|---|
| Model | KQSN80-N13/200 | CFD‑optimized; performance curve overlap ≥98% with BBS 32-200 |
| Type | API 610 BB2, single‑stage, double‑suction, horizontally split, between‑bearing | Meets ISO2548C, GB3216C; high pressure capacity; suitable for Iranian heavy‑duty service |
| Inlet/Outlet | 80×50 mm | Same as BBS 32-200; flanges comply with GB/T17241.6 (also compatible with BS 4504, ISO 7005.1) |
| Flow Range | 50 – 150 m³/h | Full BBS flow coverage – process water circulation, tank farm makeup |
| Head Range | 20 – 110 m | Matches short‑distance process water pressure requirements; shut‑off head meets API 610 safety standards |
| Design Pressure | 40 bar | 1.5× working pressure hydrostatic test – ample safety margin |
| Temperature Range | -20°C to +150°C | Wider than BBS – covers both cold northern Iran and high‑temperature process water (boiler feed, reactor cooling) |
| NPSH required | ≤ 3.5 m | Below industry average – prevents cavitation in high‑temperature water service |
| Motor | 50Hz, 380V (IEC standard) | Direct Iran grid connection – no VFD or transformer needed |
| Compliance | API 610, ISO 9001, GB/T5657 | Meets Iranian petrochemical project requirements |
| Standard Casing | HT250 cast iron + anti‑corrosion coating | Durable for Iran’s high‑salt, dusty outdoor environment |
| Standard Wetted Parts | 304 stainless steel | Resists trace chlorides (≤500 ppm) – suitable for Persian Gulf coastal process water |
| Optional Materials | 316L stainless steel / 1.4460 duplex stainless steel / SEBF coating | For high chloride or seawater‑derived process water |
| Mechanical Seal | Cartridge mechanical seal (API 682 Cat 2) | Easy replacement; leakage ≤5 ppm – meets Iran’s environmental leakage requirements |
| Hydraulic Efficiency | ≥ 78% | Meets GB19762 energy saving rating; 3‑5% higher than Sulzer – significant long‑term energy savings |
| Noise Level | ≤ 85 dB(A) | Low noise – meets Iranian plant environmental requirements |
| Vibration | ≤ 2.5 mm/s | SKF bearings; optimized lubrication – suitable for 8,000+ hour annual operation |
Identical mounting dimensions (center height, flange positions, foundation bolt pattern) – 1:1 replica of Sulzer BBS 32-200.
Flange compatibility – conforms to GB/T17241.6, also compatible with BS 4504, ISO 7005.1 – direct fit to existing Iranian refinery/plant piping.
Performance curve overlap ≥98% – no process parameter adjustment needed. Installation and commissioning completed within 8 hours – minimal downtime.
Wide temperature range (-20°C to +150°C) – handles both cold northern Iran winter process water and high‑temperature boiler feed water (150°C) in petrochemical plants. Superior to BBS which has narrower temperature capability.
Corrosion resistance upgrade – standard 304 stainless steel wetted parts resist trace chlorides (≤500 ppm). Optional 316L, duplex 1.4460, or SEBF coating for higher chloride environments (e.g., process water derived from seawater desalination along Persian Gulf coast).
Long‑life construction – SKF bearings, optimized lubrication system, vibration ≤2.5 mm/s. Designed for ≥8,000 hours/year continuous operation. Proven MTBF >30,000 hours.
CFD‑optimized hydraulic design – efficiency ≥78%, meeting GB19762 energy saving rating. 3‑5% higher efficiency than Sulzer BBS 32-200.
Annual energy saving example: For a typical Iranian petrochemical plant operating 24/7, 330 days/year, electricity cost $0.30/kWh, the efficiency improvement saves approximately $4,000–6,000 USD per year.
Lower procurement cost – 35% lower than original Sulzer BBS 32-200.
Lead time ≤60 days (vs. 120+ days for imports).
Horizontally split casing – allows internal access without removing piping, reducing maintenance labor and downtime.
Middle East spare parts warehouse – emergency response ≤4 hours for critical failures; standard spare parts supply ≤15 days. Maintenance cost 40% lower than OEM.
Manufacturer leadership: Shanghai Kaiquan is China’s leading pump manufacturer, #1 in sales for 23 consecutive years. National‑level enterprise technology center. API 610 certified. Highest market share in petrochemical sector.
Iran references: Successfully installed at Bandar Imam Petrochemical Company clean process water circulation pump project, and Persian Gulf coastal refinery high‑temperature process water transfer. Operates continuously on 50Hz grid for over 3 years in high‑salt, high‑temperature conditions – zero failures. Owner acceptance confirmed.
Bilingual documentation (English & Farsi/Persian) – includes ISIRI compliance reports, certificate of origin, material test certificates. Smooth customs clearance and NIOC project approval.
| Application | Specific Role |
|---|---|
| Large petrochemical process water circulation | Bandar Imam Petrochemical, Tehran Petrochemical Complex – equipment cooling water supply, process washing water circulation. Handles high temperature, high pressure, trace chlorides. Reliable 24/7 operation. |
| Coastal plant process water transfer | Persian Gulf coastal refineries, desalination plants – clean process water transfer. Optional 316L/duplex stainless steel resists high chloride environments, prevents pitting corrosion. |
| Boiler feedwater & steam generation | Iranian refinery boilers, waste heat recovery boilers – high‑temperature (120–150°C) feedwater. Stable pressure, meets steam system demands. |
| Tank farm & industrial water supply | Iranian inland chemical park tank farm wash water, agricultural irrigation process water – ambient temperature clean water transfer. High efficiency, low maintenance. |
API 610 (ISO 13709) – design and manufacturing
ISO 9001:2015 – quality management system
GB19762 – energy efficiency rating (meets or exceeds standard)
NACE MR0175 – available on optional configurations for anti‑sulfide service
ISIRI – meets Iran Standard & Industrial Research Institute requirements (smooth customs clearance)
Grid compatibility: 50Hz motor, 380V voltage, IP54 minimum protection – suitable for outdoor dusty, high‑salt environments
7×24 technical support – via HYRIG Middle East partner service center (Dubai & Tehran warehouses)
Fault response ≤4 hours for emergency – on‑site or remote video guidance
Spare parts supply ≤15 days for common wear parts (mechanical seals, bearings, gaskets)
Full documentation package – English/Persian IOM manuals, inspection reports, certificate of origin, ISIRI clearance documents, material test certificates (MTC), API certificate copies
HYRIG supplies a full range of API 610 centrifugal pumps for the oil, gas, petrochemical, and refinery industries:
OH2 – overhung, centerline mounted
BB2 – between‑bearing, radially split, single‑stage
BB5 – between‑bearing, barrel type, multi‑stage high pressure
VS6 – vertical suspended, double‑casing
We also offer complete Sulzer series replacements, including:
Sulzer BBS (BB2 equivalent)
Sulzer OHH (OH2 equivalent)
Sulzer GSG (multistage ring section)
Sulzer ZE (heavy‑duty process pump)
Note: The KQSN80-N13/200 is manufactured by Shanghai Kaiquan and exclusively supplied for Iran market through HYRIG, ensuring full local support, bilingual documentation, and grid‑ready configuration.
For inquiries, technical support, sizing, or a quotation, please contact us:
info@hyrig.com
HYRIG – Reliable, grid‑ready, and code‑compliant pumping solutions for Iran’s oil, gas, and petrochemical industry.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.