The SY40-250 is an API 610 BB1 single-stage, double-suction, radially split between-bearing centrifugal pump, engineered by HYRIG specifically for light crude oil transfer in Iran’s oil field gathering systems, refinery pre-treatment units, and pipeline booster stations. It serves as a benchmark domestic alternative to the Sulzer BBS 40-250, offering 1:1 dimensional interchangeability, enhanced anti‑sulfide materials, high‑altitude adaptation, and integral explosion‑proof protection.
Designed for Iran’s 50Hz power grid (380V/400V) and fully compliant with NIOC/POGC safety standards, this pump addresses the unique challenges of Iranian light crude oil (34 API, 1.48% sulfur content): low viscosity (8.882 mPa·s at 20°C) but high vapor pressure (cavitation risk), H₂S corrosion (sulfide stress corrosion), wide temperature range (-20°C to +120°C), high altitude (2,000m+ western Iranian plateau, reduced atmospheric pressure), and trace chlorides in some coastal fields. With NACE MR0175 S-6 anti‑sulfide wetted parts, low NPSHr ≤4.2m for high‑altitude service, -45°C to +120°C wide temperature range, Ex d IIB T4 explosion‑proof construction, and API 682 cartridge mechanical seal (leakage ≤5 ppm), the SY40-250 delivers safe, reliable, long‑term crude transfer – ideal for Iran’s western highlands, northern cold regions, and harsh oil field environments.
Iranian light crude oil (e.g., from Ahwaz, Marun, and other western fields) presents multiple challenges:
| Characteristic | Value / Condition | Risk / Requirement |
|---|---|---|
| API gravity | 34.04° | Light, low viscosity (8.882 mPa·s at 20°C) – high vapor pressure |
| Sulfur content | 1.36% – 1.5% | H₂S present – risk of sulfide stress corrosion (SSC) |
| Temperature range | -20°C (winter in north) to +120°C (desulfurized crude in refinery) | Requires wide thermal capability |
| Altitude | Up to 2,197m (Sepid Dasht project) | Low atmospheric pressure increases cavitation risk |
| Chlorides | Trace amounts in coastal fields | Pitting corrosion risk |
| Continuous operation | 8,000+ hours/year | High reliability required |
The SY40-250 is optimized accordingly:
NACE MR0175 S-6 anti‑sulfide material – passes 720‑hour SSC test, resists H₂S cracking in sour crude service
Low NPSHr ≤4.2m – specifically engineered for high‑altitude (2,000m+) operation where atmospheric pressure is reduced by ~20%
Wide temperature range -45°C to +120°C – covers northern Iran winter without external heating, and high‑temperature desulfurized crude in refineries
Ex d IIB T4 explosion‑proof – flameproof enclosure for Zone 1 hazardous areas
Optional 316L duplex stainless steel – resists chloride pitting for coastal installations
Radially split casing – maintenance without removing piping, ideal for remote oil fields
| Parameter | Value | Advantage over Sulzer BBS 40-250 |
|---|---|---|
| Model | SY40-250 | API 610 BB1 compliant; 1:1 dimensional & performance curve match – seamless replacement |
| Type | API 610 BB1, single‑stage, double‑suction, radially split, between‑bearing | High pressure capacity; maintenance without piping removal – ideal for remote Iranian fields |
| Inlet/Outlet | 40 mm (DN40) | Same as BBS 40-250 – direct fit to existing piping, flanges compatible with international standards |
| Flow Range | 20 – 80 m³/h | Covers full BBS operating window – wellhead gathering, booster stations, refinery pre‑treatment |
| Head Range | 200 – 250 m | Matches high‑pressure crude pipeline requirements; shut‑off head meets API 610 safety margin |
| Design Pressure | 25 bar | Hydrostatic test pressure 37.5 bar (1.5× working) – ample safety margin |
| Temperature Range | -45°C to +120°C | Significantly better low‑temperature capability than BBS – covers northern Iran winter (-20°C) and high‑temperature desulfurized crude |
| NPSH required | ≤ 4.2 m | Below industry average – specifically designed for 2,000m+ high altitude (e.g., Sepid Dasht at 2,197m) |
| Motor | 50Hz, 380V/400V (IEC standard) | Direct Iran grid connection – no VFD or transformer needed; high‑altitude insulation upgrade |
| Compliance | API 610, NACE MR0175, ISO 9001 | Meets NIOC/POGC project requirements; international anti‑sulfide & quality certification |
| Standard Wetted Parts | API 610 S-6 anti‑sulfide material | Passed NACE MR0175 720‑hour SSC test – resists H₂S cracking in 1.48% sulfur crude |
| Optional Material | 316L duplex stainless steel (PREN ≥40) | For coastal high‑chloride environments – resists pitting corrosion |
| Mechanical Seal | Cartridge mechanical seal (API 682 Cat 2) | Leakage ≤5 ppm; optional nitrogen buffer – meets Iran environmental & safety standards |
| Explosion Proof Rating | Ex d IIB T4 | Integral flameproof design per GB 3836; joint width ≥12.5mm, gap ≤0.15mm |
| Hydraulic Efficiency | ≥ 75% | Designed for 8,000+ hour/year continuous operation – energy‑efficient |
High‑altitude engineered: NPSHr ≤4.2m, combined with optimized suction geometry, ensures cavitation‑free operation at 2,000m+ altitude (e.g., Sepid Dasht project at 2,197m). Standard pumps often cavitate due to 20% lower atmospheric pressure. The SY40-250 specifically addresses this.
High‑altitude motor upgrade: Insulation materials selected to limit insulation strength degradation to <8% per 1,000m elevation gain – standard motors can fail prematurely at high altitude due to reduced cooling and dielectric strength.
Wide temperature range (-45°C to +120°C): Handles northern Iran winter (Ardabil, Tabriz) down to -20°C without external heat tracing or insulation, and refinery desulfurized crude up to 120°C. Superior to BBS 40-250 which has narrower low‑temperature capability.
NACE MR0175 S-6 anti‑sulfide material: Wetted parts (impeller, casing wear rings, shaft sleeve) manufactured from API 610 S-6 material, certified by 720‑hour sulfide stress corrosion (SSC) test per NACE TM0177. No cracks, no corrosion in 1.48% H₂S crude. Service life ≥8 years.
Optional 316L duplex stainless steel: For coastal fields with trace chlorides. Pitting Resistance Equivalent Number (PREN) ≥40 – excellent resistance to chloride‑induced pitting.
Ex d IIB T4 integral explosion‑proof: Flameproof enclosure contains internal explosions, preventing ignition of external flammable crude vapor. Flameproof joint width ≥12.5mm, gap ≤0.15mm per GB 3836. Certified for Zone 1 hazardous areas typical in Iranian oil fields and refineries.
Identical mounting dimensions (center height, flange positions, foundation bolt pattern) – 1:1 replica of Sulzer BBS 40-250.
Flange compatibility – conforms to international standards (ISO, BS, ANSI equivalents) – direct fit to existing Iranian field piping.
Performance curve overlap ≥98% – no process parameter adjustment. Field installation and commissioning completed within 12 hours – minimal production loss.
Procurement cost 30% lower than original Sulzer BBS 40-250.
Lead time ≤50 days (vs. 120+ days for imports).
Radially split casing – allows full internal access (impeller, wear rings, shaft) without removing suction/discharge piping. Critical for remote Iranian oil fields where maintenance resources are limited.
Standardized wear parts – mechanical seals, bearings, gaskets readily available from Middle East warehouse.
Middle East spare parts warehouse – emergency response ≤72 hours; normal spare parts supply ≤15 days. Spare part costs 40% lower than OEM equivalents.
Manufacturer strength: Leading Chinese API 610 BB1/BBS pump manufacturer. SY series supported by aerospace fluid technology. Sinopec and CNPC framework agreement certified. Over 50,000 trouble‑free operating hours accumulated in crude service.
Iran reference #1 – Sepid Dasht project: Exclusively supplied to Iranian National Steel Industrial Company for crude transfer at 2,197m altitude with high‑salt environment. Continuous operation on 50Hz grid for over 3 years – zero failures. Passed ISIRI certification and NIOC acceptance.
Iran reference #2 – Western highland winter operation: Successfully started and operated at -20°C ambient in western Iranian oil field – 100% start success rate, no freeze cracks, no seal leakage.
Bilingual documentation (English & Farsi/Persian) – includes NACE MR0175 certification reports, ISIRI inspection reports, certificate of origin, material test certificates. Smooth customs clearance and owner approval.
| Application | Specific Role |
|---|---|
| High‑altitude oil field gathering | Western Iranian oil fields (e.g., Sepid Dasht area, altitude 2,000m+) – wellhead crude gathering, intermediate booster stations. Low NPSHr design prevents cavitation under reduced atmospheric pressure. Anti‑sulfide materials resist H₂S. |
| Northern Iran cold region crude transfer | Ardabil, Tabriz, and other northern regions – winter crude transfer at ambient temperatures down to -20°C. Wide temperature range (-45°C) eliminates need for heat tracing or insulation. |
| Refinery crude pre‑treatment | Ahwaz Refinery, Tehran Petrochemical Complex – crude oil feed to desalters and distillation units. Handles high‑temperature desulfurized crude (up to 120°C). Explosion‑proof design meets refinery safety requirements. |
| Medium‑distance pipeline boosting | From oil fields to refineries – short to medium distance crude transfer. High head (200-250m) and long‑life design (8,000+ hours/year) suit Iranian infrastructure conditions. |
API 610 (ISO 13709) – design and manufacturing (BB1 type)
NACE MR0175 / ISO 15156 – sulfide stress corrosion (SSC) and hydrogen induced cracking (HIC) resistance; 720‑hour test report available
ISO 9001:2015 – quality management system
Ex d IIB T4 – explosion protection (GB 3836 series)
ISIRI – meets Iran Standard & Industrial Research Institute requirements (smooth customs clearance)
Grid compatibility: 50Hz motor, 380V/400V voltage options; high‑altitude insulation upgrade standard for projects above 1,000m
7×24 technical support – via HYRIG Middle East partner service center (Dubai & Tehran)
Fault response ≤72 hours – on‑site or remote video guidance
Spare parts supply ≤15 days for common wear parts (mechanical seals, bearings, gaskets, wear rings)
Full documentation package – English/Persian IOM manuals, inspection reports, certificate of origin, ISIRI clearance documents, material test certificates (MTC), NACE MR0175 compliance certificate, explosion‑proof certificate copies
HYRIG supplies a full range of API 610 centrifugal pumps for the oil, gas, petrochemical, and refinery industries:
OH2 – overhung, centerline mounted
BB1 / BB2 – between‑bearing, radially split, single‑stage
BB5 – between‑bearing, barrel type, multi‑stage high pressure
VS6 – vertical suspended, double‑casing
We also offer complete Sulzer series replacements, including:
Sulzer BBS (BB2 equivalent)
Sulzer BBS 40-250 (BB1 equivalent)
Sulzer OHH (OH2 equivalent)
Sulzer GSG (multistage ring section)
Sulzer ZE (heavy‑duty process pump)
For inquiries, technical support, sizing, or a quotation, please contact us:
info@hyrig.com
HYRIG – Reliable, grid‑ready, and code‑compliant pumping solutions for Iran’s oil, gas, and petrochemical industry.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.