The DF40-250 is an API 610 BB3 multi-stage, radially split, between-bearing centrifugal pump, engineered by Changsha Zoomlian Pump Industry (exclusively supplied for Iran market through HYRIG) specifically for amine service in Iranian refineries, gas sweetening plants, and petrochemical facilities. It serves as a 1:1 interchangeable domestic alternative to the Sulzer BBS 40-250 amine pump, offering identical dimensions, enhanced corrosion resistance, and reliable long-term operation.
Designed for Iran’s 50Hz power grid (2,950 rpm) and fully compliant with NIOC/POGC safety standards, this pump addresses the demanding requirements of high‑concentration MDEA (methyldiethanolamine) service: strong acidity (H₂S/CO₂), high temperature (up to 150°C for lean amine), trace chlorides in coastal plants, high altitude cavitation risk, and strict leakage limits. With 316L stainless steel wetted parts (PREN≥40) , NACE MR0175 anti‑sulfide certification, API 682 Cat 2 cartridge mechanical seal with nitrogen buffer (leakage ≤3 ppm) , low NPSHr ≤4.5m for high‑altitude operation, temperature range -20°C to +150°C, and Ex d IIB T4 explosion‑proof construction, the DF40-250 delivers safe, corrosion‑resistant, leak‑free, and long‑life amine transfer – ideal for Iran’s Persian Gulf coastal gas plants, high‑altitude refineries, and critical amine circulation loops.
Iranian amine service (MDEA, DEA, or mixed amine) in refineries and gas sweetening units presents unique challenges:
| Characteristic | Typical Condition | Risk / Requirement |
|---|---|---|
| Amine concentration | 30% – 50% MDEA | Corrosive, requires high‑alloy materials |
| Acid gases | H₂S + CO₂ | Sulfide stress corrosion (SSC) – NACE required |
| Temperature | Lean amine: 110–120°C (regenerator bottom); Rich amine: 40–60°C | Wide temperature range up to 150°C |
| Chlorides | Trace to 500 ppm (Persian Gulf coastal plants) | Pitting corrosion risk – PREN≥40 needed |
| Altitude | Up to 2,000m (e.g., Iranian highland refineries) | Low atmospheric pressure increases cavitation |
| Leakage requirement | Environmental & safety | Near‑zero leakage (≤3 ppm) mandatory |
| Continuous operation | 8,000+ hours/year | High reliability, easy maintenance |
The DF40-250 is optimized accordingly:
316L stainless steel (PREN≥40) – excellent resistance to H₂S/CO₂ acidic corrosion and chloride pitting. Standard on all wetted parts.
NACE MR0175 certified – passes sulfide stress corrosion (SSC) testing for H₂S service.
Wide temperature range -20°C to +150°C – covers rich amine (ambient) and lean amine (110–120°C, up to 150°C margin).
Low NPSHr ≤4.5m – specifically designed to prevent cavitation at high altitude where atmospheric pressure is reduced.
API 682 Cat 2 cartridge seal + nitrogen buffer – leakage ≤3 ppm, far below typical limits.
Radially split multi‑stage BB3 design – high pressure capability (200-250m head) with maintenance without piping removal.
| Parameter | Value | Advantage over Sulzer BBS 40-250 |
|---|---|---|
| Model | DF40-250 | 1:1 dimensional replacement for BBS 40-250 – direct bolt‑on |
| Type | API 610 BB3, multi‑stage, radially split, between‑bearing | Higher pressure capability than single‑stage; maintenance without disturbing piping |
| Inlet/Outlet | 40 mm (DN40) | Same as BBS 40-250 – direct fit to existing piping |
| Flow Range | 20 – 80 m³/h (rated 40 m³/h) | Covers full BBS operating window – lean/rich amine circulation |
| Head Range | 200 – 250 m (rated 250 m) | Meets regenerator tower pressure requirements |
| Speed | 2,950 rpm | Direct 50Hz motor – no VFD needed |
| Design Pressure | 25 bar (tested to 37.5 bar) | 1.5× safety margin |
| Temperature Range | -20°C to +150°C | Covers rich amine (ambient) and lean amine (110-120°C) – up to 150°C margin |
| NPSH required | ≤ 4.5 m | Optimized for high altitude (2,000m+) – prevents cavitation |
| Motor | 50Hz, 380V/400V (IEC) | Direct Iran grid connection |
| Compliance | API 610, NACE MR0175, ISO 9001 | Meets NIOC/POGC requirements |
| Wetted Parts Material | 316L stainless steel (PREN ≥40) | Standard – excellent H₂S/CO₂ + chloride resistance |
| Mechanical Seal | API 682 Cat 2 cartridge seal + nitrogen buffer | Leakage ≤3 ppm – far below Iran environmental limits |
| Explosion Proof | Ex d IIB T4 | Flameproof for Zone 1 hazardous areas |
| Hydraulic Efficiency | Optimized for amine service | Low energy consumption for 24/7 operation |
316L stainless steel standard – not an upgrade, but baseline. PREN (Pitting Resistance Equivalent Number) ≥40 provides excellent resistance to:
H₂S/CO₂ acidic corrosion (sweetening units)
Chloride pitting (Persian Gulf coastal plants – Bandar Imam, Assaluyeh)
Amine degradation byproducts (formate, acetate)
NACE MR0175 certified – full compliance for sour gas service. Passes SSC (sulfide stress corrosion) and HIC (hydrogen induced cracking) tests.
Result: Service life ≥10 years in 30–50% MDEA with trace chlorides – no pitting, no stress corrosion cracking.
API 682 Cat 2 cartridge mechanical seal – factory assembled, tested, and ready to install.
Nitrogen buffer (optional but recommended) – inert gas barrier prevents amine crystallization at seal faces and ensures zero emission to atmosphere.
Leakage ≤3 ppm – significantly lower than typical 5–10 ppm limits. Meets Iran’s strict environmental regulations for hazardous fluid handling.
NPSHr ≤4.5 m – optimized hydraulic model specifically for low atmospheric pressure conditions.
Field verification: At 2,000m altitude (e.g., some Iranian inland refineries), atmospheric pressure is ~80 kPa vs. 101 kPa at sea level. The DF40-250 maintains cavitation‑free operation without requiring suction booster pumps.
Competitive advantage: Many standard pumps (including some BBS 40-250 equivalents) have NPSHr >5.5m, leading to cavitation, vibration, and seal failure at high altitude.
Identical mounting dimensions to Sulzer BBS 40-250 – center height, flange positions (40mm DN), foundation bolt pattern.
Flange compatibility – ISO, BS, or ANSI options available.
Performance curve overlap ≥98% – no process re‑engineering.
Installation time: ≤8 hours (including alignment, seal connection, motor coupling).
Procurement cost: RMB 240,000–300,000 (tax included) – approximately 30% lower than original Sulzer BBS 40-250.
Lead time ≤50 days (vs. 120+ days for imports).
Radially split BB3 design – allows full rotor removal (impellers, diffusers, shaft, bearings) without disconnecting suction/discharge piping. Critical for amine service where regular seal and bearing inspection is recommended.
Middle East spare parts warehouse (Dubai & Tehran) – emergency response ≤72 hours; normal spare parts (seals, bearings, wear rings) supply ≤15 days. Spare part costs 40% lower than OEM.
Standardized components – seals, bearings, gaskets interchangeable with common API 610 parts.
Iran reference – Bandar Imam Petrochemical Gas Sweetening Plant:
Service: Lean amine circulation (40% MDEA)
Temperature: 115°C
Continuous operation: Over 2 years
Performance: Zero seal leakage, no cavitation, vibration within API limits.
Certification: Passed ISIRI inspection and NIOC acceptance.
Additional references: Multiple units in Chinese refineries and gas plants with 50% MDEA, H₂S up to 5%, service life exceeding 5 years.
| Feature | Changsha Zoomlian DF40-250 | Hefei Huasheng HDS40-250A | Yantai Longgang BB3-40/250 |
|---|---|---|---|
| Structure | API 610 BB3 multi‑stage radial split | API 610 BB2 single‑stage radial split | API 610 BB3 multi‑stage axial split |
| Material | 316L stainless steel (standard) , NACE MR0175 | 304 (316L optional) | 304/316L optional |
| Seal | Cartridge mechanical seal + nitrogen buffer (≤3 ppm) | Magnetic drive (contactless) | Cartridge mechanical seal |
| Temperature | -20 to 150°C | -20 to 120°C | -20 to 150°C |
| Price (RMB) | 240,000 – 300,000 | 260,000 – 320,000 | 190,000 – 250,000 |
| Lead time | ≤50 days | ≤60 days | ≤45 days |
| Best for | High concentration MDEA, coastal chlorides, high altitude | Low to medium concentration, no chlorides | General amine, low chloride |
Why DF40-250 for Iran amine service?
316L standard – others offer as expensive upgrade
Nitrogen buffer seal – lowest leakage (3 ppm)
NACE MR0175 – fully certified for sour gas
Proven Iran reference – Bandar Imam Petrochemical
| Application | Specific Role |
|---|---|
| Gas sweetening plant (refinery / natural gas) | Lean amine circulation from regenerator to absorber; rich amine transfer. 30–50% MDEA, H₂S/CO₂, 110–120°C lean amine. |
| High‑altitude refineries | Amine units in Iranian highlands (2,000m+) – low NPSHr prevents cavitation. |
| Persian Gulf coastal plants | Bandar Imam, Assaluyeh, South Pars gas processing – 316L resists chloride pitting from seawater cooling and humid air. |
| Sour water stripping | Amine‑based sour water treatment – similar corrosion resistance requirements. |
API 610 (ISO 13709) – design and manufacturing (BB3 type)
NACE MR0175 / ISO 15156 – sulfide stress corrosion (SSC) and hydrogen induced cracking (HIC) resistance
ISO 9001:2015 – quality management system
Ex d IIB T4 – explosion protection (flameproof enclosure)
ISIRI – meets Iran Standard & Industrial Research Institute requirements (smooth customs clearance)
Grid compatibility: 50Hz motor, 380V/400V voltage, 2,950 rpm synchronous speed
7×24 technical support – via HYRIG Middle East partner service center (Dubai & Tehran)
Fault response ≤72 hours – on‑site or remote video guidance
Spare parts supply ≤15 days for mechanical seals, bearings, gaskets, wear rings
Full documentation package – English/Persian IOM manuals, inspection reports, certificate of origin, ISIRI clearance documents, material test certificates (MTC), NACE MR0175 certificate, explosion‑proof certificate
Reference price: RMB 240,000 – 300,000 (tax included, subject to configuration)
Lead time: ≤50 days from order confirmation
Selection recommendation:
High concentration MDEA (30–50%) – DF40-250 with 316L standard
Coastal / high chloride (Persian Gulf) – DF40-250 (316L already suitable)
High altitude (>1,500m) – confirm NPSHa vs. NPSHr ≤4.5m
Ex d IIB T4 – required for Iranian hazardous areas (Zone 1/2)
HYRIG supplies a full range of API 610 centrifugal pumps for Iran’s oil, gas, petrochemical, and refinery industries:
OH2 – overhung, centerline mounted
BB1 / BB2 – between‑bearing, radially split, single‑stage
BB3 – between‑bearing, radially split, multi‑stage (DF40-250 is BB3)
BB5 – between‑bearing, barrel type, multi‑stage high pressure
VS6 – vertical suspended, double‑casing
We also offer complete Sulzer series replacements, including:
Sulzer BBS (BB2 equivalent)
Sulzer BBS 40-250 (BB1/BB3 equivalent)
Sulzer OHH (OH2 equivalent)
Sulzer GSG (multistage ring section)
Sulzer ZE (heavy‑duty process pump)
For DF40-250 inquiries, technical support, sizing, or a quotation:
info@hyrig.com
HYRIG – Reliable, grid‑ready, and code‑compliant pumping solutions for Iran’s oil, gas, and petrochemical industry.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.