The IJ65-40-250 is an API 610 single-stage, single-suction overhung (OH) centrifugal pump, engineered by Shanghai Yangguang Pump Industry (exclusively supplied for Iran market through HYRIG) specifically for alkaline solution service in Iranian chemical desulfurization units, laboratory reagent transfer, and petrochemical buffer circulation systems. It serves as a benchmark domestic alternative to the Sulzer BBS 40-250, offering 1:1 dimensional interchangeability, enhanced corrosion resistance, and energy‑efficient operation.
Designed for Iran’s 50Hz power grid (380V) and fully compliant with ISIRI mandatory certification requirements, this pump addresses the unique challenges of borate buffered saline (40–250 mM, pH 8.0–9.0, 0.9% NaCl): mild alkalinity, trace chlorides, need for metal‑ion‑free transfer, low to medium viscosity (1.2–2.5 mPa·s at 20°C), ambient to 80°C temperature range, and strict leakage limits. With 304/316L stainless steel wetted parts resisting chloride and weak alkali corrosion, API 682‑compliant seal chamber (leakage ≤5 ppm), wide temperature range -20°C to +180°C, low NPSHr ≤4.8m, hydraulic efficiency ≥78% (3–4% higher than Sulzer), and 50Hz/380V grid compatibility, the IJ65-40-250 delivers safe, reliable, energy‑saving, and low‑maintenance alkaline solution transfer – ideal for Iran’s Persian Gulf coastal high‑salt environments and industrial‑scale alkaline fluid applications.
The borate buffered saline (BBS 40–250 mM) and similar alkaline solutions used in Iranian desulfurization, laboratory, and buffer circulation applications present specific requirements:
| Characteristic | Typical Condition | Risk / Requirement |
|---|---|---|
| Solution type | Borate buffered saline (pH 8.0–9.0) + 0.9% NaCl | Mildly alkaline, trace chlorides – requires corrosion resistance |
| Metal ion contamination | Must avoid Fe, Cu, Ni leaching | 304/316L stainless steel (no metal ion pickup) |
| Viscosity | 1.2–2.5 mPa·s at 20°C | Low, easy to pump – efficiency matters |
| Temperature | Ambient to 60°C (up to 80°C for high concentration) | Wide range up to 180°C margin |
| Chlorides | Trace to moderate (coastal plants) | Pitting risk – requires PREN ≥20 minimum |
| Leakage requirement | Environmental & solution purity | Near‑zero leakage (≤5 ppm) |
| Continuous operation | 8,000+ hours/year | High reliability, easy maintenance |
The IJ65-40-250 is optimized accordingly:
304 stainless steel standard (316L optional) – resists mild alkali and trace chlorides; no metal ion contamination. PREN ≥20 for 304, ≥40 for 316L.
API 682‑compliant seal chamber – accepts mechanical seal, dynamic seal, or packing seal; leakage ≤5 ppm.
Wide temperature range -20°C to +180°C – covers ambient to 80°C alkaline solutions with ample margin.
Low NPSHr ≤4.8m – prevents cavitation even with higher concentration solutions.
High efficiency ≥78% – 3–4% better than Sulzer BBS 40-250, reducing energy cost.
Reinforced shaft & short overhang – based on ASME B73.1, solves shaft breakage issues common in traditional chemical pumps.
| Parameter | Value | Advantage over Sulzer BBS 40-250 |
|---|---|---|
| Model | IJ65-40-250 | 1:1 dimensional replacement – direct bolt‑on |
| Type | API 610 single‑stage, single‑suction, overhung (OH) | Based on ASME B73.1; thickened shaft, reduced overhang ratio – 30% higher reliability |
| Inlet/Outlet | DN65 × DN40 (65×40 mm) | Same as BBS 40-250 – direct fit to existing piping |
| Flow Range | 20 – 80 m³/h | Covers full BBS operating window – alkaline circulation, batch transfer |
| Head Range | 200 – 250 m | Matches high‑pressure alkaline transfer requirements |
| Design Pressure | 25 bar (test 37.5 bar) | 1.5× safety margin |
| Temperature Range | -20°C to +180°C | Far exceeds BBS range – covers all alkaline scenarios including high‑temp concentrate |
| NPSH required | ≤ 4.8 m | Below industry average – prevents cavitation from high concentration alkaline solutions |
| Motor | 50Hz, 380V (IEC standard) | Direct Iran grid connection – no VFD needed |
| Compliance | API 610 (8th ed.), ASME B73.1, ISO 9001 | Meets Iran ISIRI mandatory certification |
| Standard Wetted Parts | 304 stainless steel | Resists borate & trace chlorides; no metal ion contamination – certified by SGS |
| Optional Material | 316L stainless steel (PREN≥40) | For coastal high‑chloride environments – pitting resistance |
| Seal Types | Mechanical seal / dynamic seal / packing seal (API 682 cavity) | Leakage ≤5 ppm – meets Iran environmental standards |
| Hydraulic Efficiency | ≥ 78% | 5% higher than ordinary IH pumps; 3–4% higher than Sulzer BBS 40-250 |
| Vibration Level | ≤ 2.8 mm/s | Low vibration – suitable for continuous plant operation |
304 stainless steel standard – not an upgrade. Resists mild alkali (pH 8–9), borate, and trace chlorides (≤500 ppm). No iron, copper, or nickel ion leaching – essential for applications requiring solution purity (laboratory, pharmaceutical, sensitive processes).
316L stainless steel optional – for Persian Gulf coastal plants with higher chloride levels (desalination‑derived water, humid salt air). PREN ≥40 provides excellent pitting resistance.
SGS certified materials – full traceability and compliance with Iran import material requirements.
Result: Service life ≥8 years in typical alkaline service – no pitting, no contamination.
Based on ASME B73.1 (ANSI standard) – thickened shaft diameter, reduced overhang ratio (distance from bearing to impeller). Traditional chemical pumps often suffer shaft breakage under continuous duty; the IJ series solves this with 30% higher reliability.
High‑grade bearings – optimized lubrication system, designed for 8,000+ hours/year continuous operation.
Vibration ≤2.8 mm/s – meets stringent plant noise/vibration requirements.
Hydraulic efficiency ≥78% – achieved through advanced hydraulic modeling.
Energy saving comparison: 5% more efficient than ordinary IH pumps; 3–4% more efficient than Sulzer BBS 40-250.
Annual saving example: For a typical Iranian chemical plant operating 24/7, 330 days/year, electricity at $0.30/kWh, the 3–4% efficiency gain saves approximately $3,000–5,000 USD per year.
Identical mounting dimensions to Sulzer BBS 40-250 – center height, flange positions (DN65 inlet / DN40 outlet), foundation bolt pattern.
Flange compatibility – ISO, BS, or ANSI options available.
Performance curve overlap ≥98% – no process re‑engineering.
Installation time: ≤8 hours (including alignment, seal connection, motor coupling).
Procurement cost – significantly lower than original Sulzer BBS 40-250 (typically 30–40% less).
Lead time ≤50 days (vs. 120+ days for imports).
Standardized design – high parts commonality with other IJ series pumps. Maintenance without special tools.
Middle East spare parts warehouse (Dubai & Tehran) – emergency response ≤72 hours; normal spare parts (seals, bearings, impellers) supply ≤15 days. Spare part costs 40% lower than OEM.
Multiple seal options – mechanical seal (lowest leakage), dynamic seal (no rubbing, long life), or packing seal (lowest cost) – choose per application.
Iran reference – Persian Gulf coastal chemical park desulfurization auxiliary system:
Service: 200 mM borate buffered saline with trace chlorides
Temperature: Ambient to 60°C
Continuous operation: Over 2 years
Performance: No corrosion, no leakage, vibration within limits.
Certification: Passed ISIRI inspection and owner acceptance.
Additional references: Hundreds of units in Chinese chemical, pharmaceutical, and laboratory alkaline service – accumulated over 80,000 trouble‑free operating hours.
Full documentation: English/Persian manuals, ISIRI Certificate of Conformity (CoC), material test reports, certificate of origin – ensures smooth Iran customs clearance.
| Feature | Shanghai Yangguang IJ65-40-250 | Typical IH Chemical Pump | Sulzer BBS 40-250 (Original) |
|---|---|---|---|
| Structure | API 610 + ASME B73.1 (reinforced shaft) | Conventional overhung | Overhung |
| Shaft reliability | Thickened shaft, short overhang – 30% better | Prone to breakage | Good |
| Standard material | 304 SS (316L optional) | Cast iron / 304 optional | 316 SS |
| Efficiency | ≥78% | ~73–75% | ~75% |
| Temperature range | -20 to 180°C | -20 to 120°C | -20 to 120°C |
| Seal options | Mechanical / dynamic / packing (API 682 cavity) | Limited | Mechanical |
| Price | 30–40% lower | Comparable | Reference |
| Lead time | ≤50 days | 30–40 days | 120+ days |
| Iran ISIRI compliance | Full documentation + CoC | Varies | Import required |
| Application | Specific Role |
|---|---|
| Chemical desulfurization auxiliary | Persian Gulf coastal chemical parks, refinery desulfurization units – alkaline buffer circulation (borate buffered saline, 40–250 mM). 304 SS resists trace chlorides. |
| Industrial‑scale alkaline solution transfer | Central Iranian chemical industrial zones – batch transfer of alkaline reagents, solution circulation for production lines. High efficiency, low maintenance. |
| High‑temperature alkaline solution preparation | High concentration (250 mM) borate buffer preparation at up to 80°C – wide temperature range handles without special high‑temp version. |
| Laboratory & pharmaceutical alkaline transfer | Iranian research institutions, pharmaceutical chemical plants – alkaline solution transfer requiring no metal ion contamination (304/316L SS). |
| Multi‑purpose alkaline service | Any facility handling weak alkaline solutions (pH 8–10) with trace chlorides – flexible seal options for different leakage requirements. |
API 610 (ISO 13709) 8th Edition – design and manufacturing
ASME B73.1 – American National Standard for Chemical Pumps (overhung)
ISO 9001:2015 – quality management system
SGS material certification – traceable material test reports
ISIRI Certificate of Conformity (CoC) – meets Iran import mandatory certification
Grid compatibility: 50Hz motor, 380V voltage, IP54 minimum protection – suitable for outdoor dusty, high‑salt environments
7×24 technical support – via HYRIG Middle East partner service center (Dubai & Tehran)
Fault response ≤72 hours – on‑site or remote video guidance
Spare parts supply ≤15 days for mechanical seals, bearings, impellers, gaskets
Full documentation package – English/Persian IOM manuals, inspection reports, certificate of origin, ISIRI CoC, material test certificates (MTC), SGS reports
Standard configuration: 304 stainless steel wetted parts, mechanical seal (API 682 cavity), 50Hz/380V motor, IP54
Upgrade options:
316L stainless steel – for coastal high‑chloride environments (Persian Gulf)
Dynamic seal – for zero‑wear, long‑life service (no mechanical seal replacement)
Packing seal – for lowest initial cost (higher leakage tolerance)
Explosion‑proof motor (Ex d IIB T4) – for hazardous areas
Recommended for: Borate buffered saline (40–250 mM), weak alkaline solutions (pH 8–10), chloride content <500 ppm (304) or <2,000 ppm (316L)
HYRIG supplies a full range of API 610 centrifugal pumps for Iran’s oil, gas, petrochemical, and chemical industries:
OH2 – overhung, centerline mounted
BB1 / BB2 – between‑bearing, radially split, single‑stage
BB3 – between‑bearing, radially split, multi‑stage
BB5 – between‑bearing, barrel type, multi‑stage high pressure
VS6 – vertical suspended, double‑casing
We also offer complete Sulzer series replacements, including:
Sulzer BBS (BB2 equivalent)
Sulzer BBS 40-250 (BB1/OH equivalent)
Sulzer OHH (OH2 equivalent)
Sulzer GSG (multistage ring section)
Sulzer ZE (heavy‑duty process pump)
For IJ65-40-250 inquiries, technical support, sizing, or a quotation:
info@hyrig.com
HYRIG – Reliable, grid‑ready, and code‑compliant pumping solutions for Iran’s oil, gas, petrochemical, and chemical industries.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.