Amine Pumps

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
Our amine pumps are heavy duty centrifugal pumps designed for lean and rich amine service in natural gas sweetening plants, refineries, and petrochemical facilities. Flow range 5-300 m³/h, head up to 120 m, temperature up to 90°C. Wetted parts in 316 stainless steel or duplex. Mechanical seals with API flush plans. Hydraulic efficiency ≥70%, MTBF ≥8000 hours. Reliable transfer of MEA, DEA, MDEA solutions.

Conatct For Details
DetailReview(0)Additional

Our Amine Pumps are robust, heavy duty centrifugal pumps specifically engineered for lean and rich amine service in gas sweetening units, petroleum refineries, and petrochemical plants. They reliably circulate amine solutions (MEA, DEA, MDEA) to remove H₂S and CO₂ from natural gas or refinery fuel gas, ensuring high efficiency and environmental compliance.

Key Performance Parameters

  • Flow range: 5 – 300 m³/h (customizable based on plant capacity)

  • Head range: 20 – 120 m (depending on system pressure requirements)

  • Speed: 1450/1750 RPM or 2950/3550 RPM

  • Power range: 2.2 – 160 kW (varies with flow, head, and amine density)

Process Compatibility

  • Temperature range: -10°C to 90°C – suitable for both lean amine (cooler) and rich amine (warmer) service.

  • Design pressure: Up to 25 bar (363 psi)

  • Media handled: Lean amine, rich amine, MEA, DEA, MDEA, degraded amine solutions, amine/water mixtures.

  • Wetted materials: 316 stainless steel (standard) – excellent corrosion resistance against amine and associated acid gases (H₂S/CO₂). Duplex or super duplex available for highly sour or chloride‑rich service.

Reliability & Efficiency

  • Sealing system: Mechanical seal (single or double cartridge) with API flush plans – typically Plan 11, 21, or 23. Double seal with barrier fluid (Plan 52/53) recommended for environmental protection and leakage prevention.

  • Hydraulic efficiency: ≥70% at best efficiency point (BEP)

  • NPSHr: ≤4.5 m – ensures stable operation under typical suction conditions.

  • MTBF: ≥8000 hours – supports continuous 24/7 operation with minimal maintenance.

Mechanical Design

  • Inlet/Outlet: Suction 2″–8″, discharge 1.5″–6″ (customizable based on flow rate)

  • Flange rating: PN 16 / PN 25 / Class 150 / Class 300 RF

  • Design standard: ISO 2858 / ISO 5199 (back pull‑out, foot mounted) or API 610 OHH for heavy duty applications.

  • Material standard: Casing in CF8M (316SS) or CF3M (low carbon 316SS); impeller in CF8M; shaft in AISI 420, 431, or 17-4 PH stainless steel.

  • Mounting: Horizontal, back pull‑out design for easy maintenance without disturbing piping.

Why Choose Our Amine Pumps?

For lean/rich amine circulation in gas sweetening and amine regeneration units, our pumps deliver corrosion‑resistant, energy‑efficient, and long‑lasting performance. The stainless steel wetted parts, robust sealing options, and flexible hydraulic coverage make them the ideal choice for safe, reliable amine transfer.

Need more information or a quotation?
Please contact us at: info@hyrig.com
Our engineering team is ready to provide technical data, selection assistance, and after‑sales service. Please specify your required flow, head, amine type, and operating temperature for a precise recommendation.


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit