The Amine Regeneration Reflux Pump is a heavy duty horizontal centrifugal pump specifically engineered for reflux service in amine regeneration units (ARU) of natural gas sweetening plants, refineries, and petrochemical facilities. It reliably returns the overhead condensate – a mixture of water, trace amine, and acid gases (H₂S/CO₂) – from the reflux accumulator back to the top of the amine regenerator column, maintaining stable column temperature and reflux ratio for optimal amine stripping.
Key Performance Parameters
Flow range: 5 – 80 m³/h (customizable based on regenerator capacity)
Head range: 50 – 120 m (depending on column pressure and elevation)
Speed: 2950/3550 RPM (typical for medium head applications)
Power range: 2.2 – 37 kW (varies with flow, head, and fluid density)
Process Compatibility
Temperature range: 20°C to 120°C – overhead condensate from regenerator is typically hot and saturated.
Design pressure: Up to 20 bar (290 psi) – suitable for regenerator system pressures.
Media handled: Water/amine condensate, H₂S, CO₂, trace MEA/DEA/MDEA, hydrocarbon vapors, sour water.
Wetted materials: 316 stainless steel (standard) – excellent resistance against sour corrosion (H₂S/CO₂) and amine degradation products. Duplex optional for severe sour service.
Reliability & Efficiency
Sealing system: Mechanical seal (single or double cartridge) with API flush plans – typically Plan 11 or 21. Double seal (Plan 52/53) with barrier fluid strongly recommended for sour service to prevent H₂S emissions.
Hydraulic efficiency: ≥68% at best efficiency point (BEP) – optimized for the specific gravity and viscosity of reflux mixture.
NPSHr: ≤4.0 m – ensures stable operation with reflux accumulator suction head.
MTBF: ≥8000 hours – supports continuous 24/7 operation.
Mechanical Design
Inlet/Outlet: Suction 2″–4″, discharge 1.5″–2.5″ (customizable)
Flange rating: Class 150 / Class 300 RF (for sour service)
Design standard: ISO 2858 / ISO 5199 or API 610 OHH for heavy duty requirements.
Material standard: Casing in CF8M (316SS) or CF3M; impeller in CF8M; shaft in AISI 420, 431, or 17-4 PH stainless steel.
Mounting: Horizontal, back pull‑out design for easy maintenance without disturbing piping.
Why Choose This Amine Regeneration Reflux Pump?
For amine regenerator reflux service, this pump delivers corrosion‑resistant, emission‑conscious, and reliable performance. Its 316 stainless steel wetted parts, robust sour‑service sealing, and optimized hydraulics ensure stable reflux flow, maximizing H₂S/CO₂ stripping efficiency and prolonging amine life.
Need more information or a quotation?
Please contact us at: info@hyrig.com
Our engineering team is ready to provide technical data, selection support, and after‑sales service. Please specify your required flow, head, amine type (MEA/DEA/MDEA), and operating temperature for a precise recommendation.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.