The Lean Amine Booster Pump is a heavy duty horizontal centrifugal pump specifically engineered to increase the pressure of lean amine (MEA, DEA, MDEA) from the amine regenerator outlet to the required absorber inlet pressure in natural gas sweetening plants, refineries, and petrochemical facilities. It ensures efficient circulation and optimal acid gas removal.
Key Performance Parameters
Flow range: 10 – 200 m³/h (customizable based on plant capacity)
Boost head range: 30 – 100 m (pressure increase required between regenerator and absorber)
Speed: 1450/1750 RPM or 2950/3550 RPM
Power range: 7.5 – 90 kW (varies with flow, head, and amine density)
Process Compatibility
Temperature range: 20°C to 90°C – lean amine typically exits regenerator at elevated temperature.
Design pressure: Up to 25 bar (363 psi) – suitable for higher pressure absorber circuits.
Media handled: Lean amine (low H₂S/CO₂ loading), MEA, DEA, MDEA, degraded amine, amine/water mixtures.
Wetted materials: 316 stainless steel (standard) – excellent corrosion resistance against amine and associated acid gases. Duplex or super duplex for highly sour or chloride‑rich service.
Reliability & Efficiency
Sealing system: Mechanical seal (single or double cartridge) with API flush plans – typically Plan 11 (internal recirculation) or Plan 21 (cooling). Plan 52/53 (double seal with barrier fluid) recommended for leakage prevention.
Hydraulic efficiency: ≥72% at best efficiency point (BEP)
NPSHr: ≤4.5 m – ensures stable operation with typical available suction head from regenerator surge drum.
MTBF: ≥8000 hours – supports continuous 24/7 operation with minimal maintenance.
Mechanical Design
Inlet/Outlet: Suction 2″–6″, discharge 1.5″–4″ (customizable based on flow)
Flange rating: PN 25 / Class 150 or Class 300 RF
Design standard: ISO 2858 / ISO 5199 (back pull‑out, foot mounted) or API 610 OHH for heavy duty applications.
Material standard: Casing in CF8M (316SS); impeller in CF8M; shaft in AISI 420, 431, or 17-4 PH stainless steel.
Mounting: Horizontal, back pull‑out design for easy maintenance without disturbing piping.
Why Choose This Lean Amine Booster Pump?
For lean amine boosting in gas sweetening units, this pump delivers corrosion‑resistant, energy‑efficient, and long‑lasting performance. Its 316 stainless steel wetted parts, robust sealing options, and flexible hydraulic coverage ensure reliable pressure boosting to maintain optimal absorber operation and maximize acid gas removal efficiency.
Need more information or a quotation?
Please contact us at: info@hyrig.com
Our engineering team is ready to provide technical data, selection support, and after‑sales service. Please specify your required flow, boost head, amine type, and operating temperature for a precise recommendation.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.