The Amine Sump Pump is a rugged centrifugal pump specifically engineered for collecting and transferring lean or rich amine solutions from sumps, pits, drain tanks, and low level collection points in gas sweetening plants, refineries, and petrochemical facilities. It ensures reliable removal of amine drips, spills, or drainage, preventing environmental hazards and recovering valuable amine for reprocessing.
Key Performance Parameters
Flow range: 2 – 50 m³/h (customizable based on sump size and drainage load)
Head range: 10 – 50 m (depending on discharge requirements)
Speed: 1450/1750 RPM or 2950/3550 RPM
Power range: 0.75 – 15 kW (varies with flow and head)
Process Compatibility
Temperature range: -10°C to 80°C – suitable for ambient to warm amine solutions.
Design pressure: Up to 10 bar (145 psi) – typical for low pressure sump transfer.
Media handled: Lean amine, rich amine, MEA, DEA, MDEA, degraded amine, amine/water mixtures with potential solids.
Wetted materials: 316 stainless steel (standard) – excellent corrosion resistance against amine and associated H₂S/CO₂. Duplex optional for aggressive service.
Reliability & Efficiency
Sealing system: Mechanical seal (single or double cartridge) with API flush plans. For vertical submerged pumps, seal‑less design (canned motor or magnetic drive) is also available.
Hydraulic efficiency: ≥65% at best efficiency point (BEP)
NPSHr: Low NPSHr design (≤2.5 m) – critical for sump applications with limited available suction head.
MTBF: ≥8000 hours – supports reliable continuous or intermittent operation.
Mechanical Design (Configuration Options)
Configuration: Horizontal (foot mounted, back pull‑out) or Vertical (submerged / cantilever) – vertical design eliminates priming issues and allows direct installation into sumps.
Inlet/Outlet: Suction 1.5″–4″, discharge 1″–3″ (customizable)
Flange rating: PN 16 / Class 150 RF
Design standard: ISO 2858 / ISO 5199 (horizontal) or API 610 VS (vertical submerged) where applicable.
Material standard: Casing in CF8M (316SS); impeller in CF8M; shaft in AISI 420 or 431 stainless steel.
Why Choose This Amine Sump Pump?
For amine sump and pit transfer applications, this pump delivers corrosion‑resistant, reliable, and low‑maintenance performance. Its 316 stainless steel construction, low NPSHr design, and flexible mounting options (horizontal or vertical) make it the ideal solution for collecting and transferring amine from low level sumps back to the amine circulation system.
Need more information or a quotation?
Please contact us at: info@hyrig.com
Our engineering team is ready to provide technical data, selection support, and after‑sales service. Please specify your required flow, head, sump depth, and amine type for a precise recommendation.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.