The Amine Transfer Pump is a heavy‑duty, ISO 2858 / ISO 5199 horizontal centrifugal pump specifically engineered for lean and rich amine service. It is widely used in natural gas sweetening plants, petroleum refineries, and petrochemical facilities to circulate amine solutions (MEA, DEA, MDEA) for efficient removal of H₂S and CO₂.
Key Performance Parameters
Flow range: 10 – 200 m³/h (customizable based on plant capacity)
Head range: 30 – 100 m (depending on system pressure requirements)
Speed: 1450/1750 RPM or 2950/3550 RPM
Power range: 4 – 90 kW
Process Compatibility
Temperature range: Up to 80°C – suitable for both lean amine (cooler) and rich amine (warmer) circulation.
Design pressure: Up to 16 bar (232 psi)
Media handled: Lean amine, rich amine, MEA, DEA, MDEA, degraded amine, amine/water mixtures.
Wetted materials: 316 stainless steel (standard) – excellent corrosion resistance against amine and associated acid gases. Duplex or super duplex optional for highly sour service.
Reliability & Efficiency
Sealing system: Mechanical seal (single or double cartridge) with API flush plans – typically Plan 11, 21, or 23. Double seal with barrier fluid (Plan 52/53) recommended for environmental protection.
Hydraulic efficiency: ≥70% at best efficiency point
NPSHr: ≤4.0 m – ensures stable operation under typical suction conditions.
MTBF: ≥8000 hours – supports continuous 24/7 operation with minimal maintenance.
Mechanical Design
Inlet/Outlet: Suction 2″–6″, discharge 1.5″–4″ (customizable)
Flange rating: PN 16 / Class 150 RF (or Class 300)
Design standard: ISO 2858 / ISO 5199 (back pull‑out, foot mounted). API 610 OHH construction also available for heavy duty requirements.
Material standard: Casing in CF8M (316 stainless steel), impeller in CF8M, shaft in AISI 420 or 431 stainless steel.
Mounting: Horizontal, back pull‑out design for easy maintenance without disturbing piping.
Why Choose This Amine Transfer Pump?
For lean/rich amine circulation in gas sweetening units (amine regeneration systems), this pump delivers corrosion‑resistant, reliable, and energy‑efficient performance. Its stainless steel wetted parts, robust sealing options, and flexible hydraulic coverage make it the ideal choice for safe, long‑lasting amine transfer.
Need more information or a quotation?
Please contact us at: info@hyrig.com
Our engineering team is ready to provide technical data, selection support, and after‑sales service. Please specify your required flow, head, and amine type for a precise recommendation.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.