The Flare Knockout Pump is a rugged, heavy duty centrifugal pump (API 610 OHH or ISO 2858 design) specifically engineered for condensate recovery from flare knockout drums in petroleum refineries, petrochemical plants, and oil & gas facilities. It reliably pumps hydrocarbon condensate collected in the flare knock‑out drum to slop oil tanks, oily water treatment, or downstream processing units, preventing liquid carryover to the flare stack.
Key Performance Parameters
Flow range: 5 – 50 m³/h (customizable based on KO drum size and condensate load)
Head range: 50 – 150 m (depending on discharge pressure requirements)
Speed: 2950/3550 RPM (low flow / high head design)
Power range: 3 – 30 kW (varies with flow and specific gravity)
Process Compatibility
Temperature range: -20°C to 150°C – suitable for ambient to moderately hot hydrocarbon condensate.
Design pressure: Up to 20 bar (290 psi) – compatible with typical KO drum pressure (near atmospheric to low pressure).
Media handled: Hydrocarbon condensate (light hydrocarbons, water, potential H₂S), slop oil, oily water, flare system liquids.
Wetted materials: Carbon steel (standard) – for non‑corrosive service; 316 stainless steel or duplex (optional for sour service or higher corrosion resistance).
Reliability & Efficiency
Sealing system: Mechanical seal (single or double cartridge) with API flush plans – typically Plan 11 (internal recirculation) or Plan 21 (cooling). For sour or hazardous service, Plan 52/53 (double seal with barrier fluid) is recommended.
Hydraulic efficiency: ≥60% at best efficiency point (BEP) – optimized for low flow, high head service.
NPSHr: ≤3.5 m – ensures stable operation even with potential vapor entrainment from KO drum.
MTBF: ≥8000 hours – supports reliable continuous or intermittent operation.
Mechanical Design
Inlet/Outlet: Suction 2″–4″, discharge 1.5″–2″ (customizable based on flow rate)
Flange rating: Class 150 / Class 300 RF (customizable)
Design standard: API 610 11th/12th edition (OHH type – heavy duty, centerline support) or ISO 2858 / ISO 5199 for lighter duty.
Material standard: Casing in carbon steel (WCB); impeller in CA6NM or 316 SS; shaft in AISI 4140 (hardened) or 17-4 PH.
Mounting: Horizontal, centerline mounted – back pull‑out design allows maintenance without disturbing piping.
Why Choose This Flare Knockout Pump?
For flare knockout drum condensate recovery in refinery flare systems, this pump delivers reliable, low‑flow high‑head performance. Its robust construction, flexible sealing options for sour service, and compact footprint make it the preferred choice for handling hydrocarbon condensate from flare KO drums, ensuring environmental compliance and operational safety.
Need more information or a quotation?
Please contact us at: info@hyrig.com
Our engineering team is ready to provide technical data, selection support, and after‑sales service. Please specify your required flow, head, and media composition for a precise recommendation.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.