The OH2 Recycle Pump is a heavy duty, API 610 (ISO 13709) Type OH2 horizontal overhung centrifugal pump specifically engineered for process recycle, reflux, and circulation services in petroleum refineries, petrochemical plants, chemical processing, and gas processing facilities. It reliably handles clean or slightly contaminated, cold or hot, chemically neutral or aggressive liquids across a wide range of industrial applications.
Key Performance Parameters (Typical for OH2 Recycle Service)
Flow range: 10 – 1,920 m³/h (depending on hydraulic selection)-22-27
Head range: Up to 380 m (approximately 1,250 ft)-22
Speed: 1,450/1,750 RPM or 2,950/3,550 RPM (based on duty point)
Power range: 11 – 630 kW (varies with flow, head, and media density)-27
Process Compatibility (Recycle & Circulation Service)
Temperature range: -80°C to 425°C – suitable for cryogenic to high temperature process streams-27-22
Design pressure: Up to 64 bar (928 psi) – compatible with demanding process recycle loops-27
Media handled: Hydrocarbons, gas condensate, crude oil, petroleum products, chemicals, amines, sour water, hot oil, and other industrial fluids-27
Wetted materials: Multiple API 610 material classes available – S-1, S-5, S-6, S-8, C-6, A-8, D-1/D-2 (carbon steel, 12% chrome, 316 stainless steel, duplex, super duplex)-21-27
Reliability & Efficiency
Sealing system: Mechanical seal (single, double, tandem, or gas seal) with API flush plans – fully compliant with API 682 / ISO 21049. Seal chamber sized to accommodate cartridge type seals-27
Hydraulic efficiency: ≥70% at best efficiency point (BEP) – diffuser or volute design minimizes radial loads and optimizes efficiency across operating range-22
NPSHr: Low NPSH characteristics; optional screw-type inducer available for NPSH limited applications-27
MTBF: ≥8000 hours – heavy duty construction supports continuous 24/7 operation
Mechanical Design (API 610 OH2 Features)
Configuration: Single stage, overhung, horizontal, centerline mounted, radially split casing-22-
Inlet/Outlet: Suction and discharge sizes up to 300 mm (12″) – suction flange located on pump axis, discharge flange directed radially upward (self-venting design)-22-21
Flange rating: Class 150, 300, 600 RF (ANSI/ASME) or PN 16/25/40 (DIN/EN)-22-21
Design standard: API 610 11th/12th edition (ISO 13709) – full compliance-6
Rotor support: Rigid shaft with increased diameters ensures minimal deflection (<0.05 mm) – extends bearing and mechanical seal life-21-27
Bearing housing: Ribbed housing with capacious oil pan, fan cooling (or optional shaft-mounted fan) – supports high temperature operation-21-27
Maintenance: Back pull-out design – pump internals can be removed without disconnecting suction/discharge piping or moving the driver-22-27
Wear rings: Renewable casing and impeller wear rings (hard alloy options available) to maintain hydraulic efficiency over pump life-27-
Impeller: Closed radial design, dynamically balanced, double wear rings. Semi-open impeller available for solids‑handling applications-22
Applications (Recycle & Related Services)
OH2 pumps are widely used in the following recycle and circulation services across refineries and petrochemical plants-27-6:
Recycle loops in hydroprocessing units
Reflux services in fractionation towers
Condensate removal and circulation
Product feeding and reactor feed
Heat exchange circulation
Amine circulation and transfer
Sour water handling
Desalting system recycle (proven in crude oil desalting applications)-15
Hot oil circulation
Gas condensate handling
Light ends recovery
Why Choose This OH2 Recycle Pump?
For process recycle and circulation services in demanding refinery, petrochemical, and gas processing environments, the OH2 pump delivers exceptional reliability, high hydraulic efficiency, and long service life. Its API 610 heavy duty construction, centerline mounted design for high temperature stability, flexible material options, and back pull-out maintenance access make it the industry standard for critical recycle applications.
Need more information or a quotation?
Please contact us at: info@hyrig.com
Our engineering team is ready to provide technical data, selection support, and after‑sales service. Please specify your required flow, head, operating temperature, media type, and any specific API material class for a precise recommendation.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.