The DSJH series is a heavy duty API610 (11th edition) compliant BB2 horizontal radially split between‑bearing centrifugal pump with a single‑stage double suction impeller. It is specifically engineered for chemical solvents, flammable hydrocarbons, and high temperature process fluids in refineries, petrochemical plants, coal chemical units, and tank farms – ideal for large solvent circulation, tower bottom pumps, reflux pumps, and high pressure transfer where OH2 cantilever pumps are not suitable.
Toluene, xylene, methanol, ethanol, acetone, ethyl acetate, benzene, light hydrocarbons, high temperature solvents (up to 450°C), clean low‑viscosity process fluids (no solids).
Capacity: 84 – 1700 m³/h
Head: 65 – 250 m
Design pressure: 5.0 MPa (PN50 / Class 300)
Temperature: -80°C to +450°C (typical solvent service -40°C to +200°C)
Flange rating: ANSI Class 300, RF face
Speed: 1450 / 2950 r/min (1450 preferred for large flow, high temperature)
Between‑bearing support + centerline mounting – impeller located between two bearings for maximum rotor rigidity, ultra‑low vibration (≤3 mm/s). Centerline mounting eliminates thermal misalignment at high temperatures.
Radially split casing – allows easy access for maintenance without removing process piping.
Single‑stage double suction impeller – inherently balanced axial thrust, low NPSH for excellent cavitation resistance (critical for volatile solvents). Higher efficiency compared to single‑suction designs.
Double volute casing (all sizes) – automatically balances radial hydraulic forces, reducing bearing load and ensuring smooth, low‑vibration operation even under off‑design conditions.
Heavy duty rigid shaft – large diameter, short span, deflection ≤0.03 mm, high critical speed.
Heavy duty angular contact thrust bearings – oil bath lubrication, fin fan cooling, PT100 temperature monitoring standard. Designed for 24/7 continuous operation.
API682 cartridge mechanical seal – SiC/graphite/FKM/PTFE components; metal bellows option for high temperature service.
Flush plans – standard Plan 11/21/52/53 as per service conditions prevents solvent vaporization, coking, and leakage.
Explosion‑proof and anti‑static design – Ex d motor, anti‑static grounding, fully compliant with hazardous area regulations.
Corrosion resistant materials – all wetted parts available in 316L or duplex for aggressive solvents.
Casing / volute: 316L (standard solvents), duplex (chloride/acidic solvents), WCB (light hydrocarbons).
Impeller / shaft sleeve: 316L, duplex, wear‑resistant alloy.
Mechanical seal: API682 cartridge (SiC/graphite/PTFE), metal bellows for high temperature.
Bearings: Oil lubricated with cooling; vibration/temperature monitoring available.
NACE MR0175 available on request.
✔︎ True API610 BB2 heavy duty – between‑bearing, double suction, double volute – proven in refinery and chemical core duties worldwide.
✔︎ Excellent low NPSH performance – double suction impeller handles volatile solvents (toluene, methanol, etc.) without cavitation.
✔︎ Large flow & medium‑high head – covers 84‑1700 m³/h and heads to 250 m, ideal for large solvent circulation, tower bottoms, and tank farm transfer.
✔︎ Zero leakage, explosion safe – API682 seal with appropriate flush plans, Ex d motor and anti‑static grounding.
✔︎ Long‑term maintenance‑free operation – ultra‑low vibration (≤3 mm/s), heavy duty bearings, designed for 24/7 continuous chemical processing.
✔︎ Cost‑effective domestic alternative – 40‑60% lower price than imported Sulzer BBT or KSB HDB, same API610 compliance, 14‑18 weeks delivery.
✔︎ Proven in large‑scale refineries, coal chemical plants, and petrochemical solvent units.
DSJH (BB2, double suction) – flow 84‑1700 m³/h, head 65‑250 m, excellent cavitation resistance; ideal for medium‑large flow solvent services.
HDD (BB2, double suction/single suction) – wider range 50‑7500 m³/h, head 50‑500 m, for extra‑large flow or very high head.
EAP/RPH/ASP5310 (OH2, cantilever) – smaller flow (<300 m³/h), lower head, routine duties with easier maintenance.
Medium‑large flow ambient solvents (300‑800 m³/h, -40°C to 120°C) – DSJH BB2, 316L metallurgy, speed 1450 r/min.
High temperature / high head solvents (120°C to 200°C, head ≥150 m) – 316L + metal bellows seal + Plan 23 flush, speed 1450 r/min.
Strongly corrosive / chloride containing solvents – duplex metallurgy + high corrosion resistant seal.
Flammable / hazardous areas – explosion‑proof motor + anti‑static grounding + API682 seal.
Spare parts for large solvent circulation pumps, tower bottom pumps, reflux pumps, tank farm transfer
14‑18 weeks delivery for engineered BB2 pumps
Full documentation: performance curves, NPSH test reports, material certificates (EN10204 3.1), hydrotest, API682 cert, vibration test reports, NACE (if required)
Long‑term service agreement and on‑site technical support
For API610 BB2 chemical solvent pump datasheet, DSJH medium‑large flow quotation, or refinery solvent system project support, please contact us:
info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.