The HDD series is a heavy duty API610 (11th/12th edition) compliant BB2 horizontal radially split between‑bearing centrifugal pump, specifically engineered for large flow, high pressure chemical solvent applications in refineries, petrochemical plants, coal chemical units, and tank farms – handling solvent circulation, tower bottom pumps, reflux pumps, and high pressure solvent transfer where OH2 cantilever pumps are insufficient.
Toluene, xylene, methanol, ethanol, acetone, ethyl acetate, benzene, light hydrocarbons, high temperature solvents, clean low‑viscosity process fluids (no solids).
Capacity: 50 – 7500 m³/h
Head: 50 – 500 m (up to 700 m on request)
Design pressure: single stage 5.0 MPa (PN50) ; multistage up to 15.0 MPa
Temperature: -80°C to +450°C (typical solvent service -40°C to +200°C)
Flange rating: ANSI Class 300 – Class 600 (PN50 – PN110), RF face
Speed: 1450 / 2950 r/min (prefer 1450 for large flow, high temperature)
Between‑bearing support + centerline mounting – impeller located between two bearings, maximum rotor rigidity, ultra‑low vibration (≤3 mm/s). Centerline mounting eliminates thermal misalignment at high temperatures.
Radially split casing – easy access for maintenance without removing piping.
Single‑stage double suction impeller (standard) – low NPSH, excellent cavitation resistance for volatile solvents. Higher efficiency (3‑6% better than OH2 at large flows).
Double volute hydraulic design (all sizes) – automatically balances radial forces, low bearing load, smooth operation, long bearing life.
Heavy duty rigid shaft – large diameter, short span, deflection ≤0.03 mm.
Heavy duty angular contact thrust bearings – oil bath lubrication, fin fan cooling, PT100 temperature monitoring, suitable for 24/7 continuous operation.
API682 cartridge mechanical seal – SiC/graphite/FKM/PTFE, metal bellows option for high temperature solvents.
Flush plans – standard Plan 11/21/52/53 as per duty, prevents vaporization, coking and leakage.
Explosion‑proof and anti‑static design – Ex d motor + anti‑static grounding, compliant with hazardous area codes.
Corrosion resistant materials – 316L, duplex for aggressive solvents.
Casing / volute: 316L (standard solvents), duplex (chloride/acidic), WCB (light hydrocarbons).
Impeller / shaft sleeve: 316L, duplex, wear‑resistant alloy.
Mechanical seal: API682 cartridge (SiC/graphite/PTFE), metal bellows for high temperature.
Bearings: Oil lubricated with cooling, vibration/temperature monitoring available.
NACE MR0175 available on request.
✔︎ True API610 BB2 heavy duty – between‑bearing support, double suction, double volute – built for demanding large flow, high pressure refinery/chemical core duties.
✔︎ Large flow & high pressure capability – up to 7500 m³/h and 500+ m head – ideal for large solvent systems, replacing multiple OH2 pumps in parallel.
✔︎ Low NPSH, anti‑cavitation – double suction impeller provides excellent suction performance for volatile solvents.
✔︎ Zero leakage, explosion safe – API682 seal + appropriate flush plans, Ex d motor + anti‑static grounding.
✔︎ Long‑term maintenance‑free operation – ultra‑low vibration, heavy duty bearings – designed for 24/7 continuous chemical runs, reduced downtime.
✔︎ Cost‑effective domestic alternative – 40‑60% lower cost than Sulzer BBT or KSB HDB, same API610 compliance, 14‑18 weeks delivery.
✔︎ Proven in large scale refineries, coal chemical plants and petrochemical solvent units.
HDD (BB2, between‑bearing) – large flow (≥300 m³/h), medium‑high head (≥80 m), high temp/pressure, core duties, long continuous runs.
EAP/RPH/ASP5310 (OH2, cantilever) – small‑medium flow (≤300 m³/h), low‑medium head (≤80 m), routine duties, easier maintenance.
Large flow ambient solvents (300‑1000 m³/h, -40°C to 120°C) – HDD BB2, 316L metallurgy, speed 1450 r/min.
High temperature / high pressure solvents (120‑200°C, head ≥150 m) – 316L + metal bellows seal + Plan 23 flush, speed 1450 r/min.
Strongly corrosive / chloride containing solvents – duplex metallurgy + high corrosion seal.
Flammable / hazardous areas – explosion‑proof motor + anti‑static grounding + API682 seal.
Spare parts for large solvent circulation pumps, tower bottom pumps, reflux pumps, tank farm transfer
14‑18 weeks delivery for engineered BB2 pumps
Full documentation: performance curves, NPSH test reports, material certificates (EN10204 3.1), hydrotest, API682 cert, vibration test reports, NACE (if required)
Long‑term service agreement and on‑site technical support
For API610 BB2 chemical solvent pump datasheet, HDD large flow quotation, or refinery solvent system project support, please contact us:
info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.