The ASP5310 series is an API610 (11th edition) compliant OH2 horizontal single‑stage radial split centerline‑mounted overhung centrifugal pump with back pull‑out design. It is specifically engineered for chemical solvents, flammable hydrocarbons, and moderately corrosive liquids in refineries, petrochemical, fine chemical, pharmaceutical, and pesticide industries – handling solvent transfer, reactor feed, distillation reflux, and tank farm circulation.
Toluene, xylene, methanol, ethanol, acetone, ethyl acetate, methylene chloride, isopropanol, benzene, light hydrocarbons, clean low‑viscosity solvents (no solids).
Capacity: 5 – 2600 m³/h
Head: 30 – 250 m (up to 300 m on request)
Design pressure: 2.5 – 5.0 MPa (PN25 – PN50)
Temperature: -80°C to +300°C (typical solvent service -40°C to +180°C)
Flange rating: ANSI Class 150 – Class 300 (PN20 – PN50), RF/FF available
Speed: 1450 / 2950 r/min (2950 for low viscosity, 1450 for high temperature)
Centerline mounting – uniform thermal expansion, excellent alignment, low vibration.
Radial split + back pull‑out – rotor can be withdrawn without disconnecting process piping, fast maintenance.
Double volute casing (DN80 and above) – balances radial forces, smooth operation, high efficiency.
Heavy duty rigid shaft with short overhang – deflection ≤0.05 mm, high stiffness, low vibration.
Heavy duty angular contact thrust bearings – oil bath lubrication, suitable for 24/7 continuous operation.
API682 cartridge mechanical seal – SiC/graphite/FKM/PTFE, specially selected for solvents.
Flush plans – standard Plan 11/21/52 prevents vaporization, coking and leakage.
Explosion‑proof and anti‑static design – Ex d motor + anti‑static grounding, fully compliant with hazardous area codes.
Corrosion resistant materials – all wetted parts in 304, 316L or duplex.
Casing / volute: 304 (standard solvents), 316L (chloride/weak acid), duplex (strongly corrosive).
Impeller / shaft sleeve: 304/316L, duplex, wear‑resistant alloy.
Mechanical seal: API682 cartridge (SiC/graphite/PTFE).
Bearings: Oil lubricated, fin fan cooling, PT100 temperature monitoring.
NACE MR0175 available on request.
✔︎ True API610 OH2 heavy duty – centerline mounting, radial split, back pull‑out – proven design for demanding chemical service.
✔︎ Full corrosion and explosion protection – 316L/duplex wetted parts, API682 seal, Ex d motor, anti‑static grounding – safe for flammable solvents.
✔︎ Zero leakage, anti‑vaporization – API682 seal with proper flush plans prevents solvent loss and dry running.
✔︎ High efficiency, low NPSH – CFD optimized hydraulics, 5‑8% more efficient than standard pumps.
✔︎ Fast maintenance – back pull‑out rotor, no pipe removal – reduces downtime.
✔︎ Cost‑effective domestic alternative – 30‑50% lower price than KSB RPH or Sulzer OHH, same API610 compliance, shorter delivery (12‑16 weeks).
✔︎ Proven in refineries, fine chemical, pharmaceutical and pesticide plants.
ASP5310 – heavy duty domestic OH2, 316L standard, high performance, cost‑effective.
EAP – standard chemical grade, basic corrosion protection, lower cost for routine solvents.
RPH (KSB) – imported, premium materials, higher precision, higher price, longer delivery.
Standard solvents (ambient to 120°C) – ASP5310 OH2, 316L metallurgy, speed 2950 r/min.
High temperature solvents (120‑300°C) – 316L + metal bellows seal + Plan 23 flush, speed 1450 r/min.
Strongly corrosive solvents (chlorinated, acidic) – duplex metallurgy + high corrosion seal.
Flammable / hazardous areas – explosion‑proof motor + anti‑static grounding + API682 seal.
Spare parts for solvent transfer pumps, reactor feed, distillation reflux, circulation loops
12‑16 weeks delivery for engineered ASP5310 pumps
Full documentation: performance curves, material certificates (EN10204 3.1), NPSH test, hydrotest, API682 cert, NACE (if required)
Long‑term service agreement and on‑site support
For API610 OH2 chemical solvent pump datasheet, ASP5310 quotation, or reactor feed project support, please contact us:
info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.