The RPH series, manufactured by KSB Germany, is an API610 (10th/11th/12th edition) compliant OH2 horizontal single‑stage radial split centerline‑mounted overhung centrifugal pump – a classic and widely adopted design for chemical solvents, flammable hydrocarbons, and corrosive process liquids in refineries, petrochemical plants, fine chemical, pharmaceutical, and coal chemical industries. It handles solvent transfer, distillation reflux, reactor feed, and circulation service.
Methanol, ethanol, toluene, xylene, acetone, ethyl acetate, benzene, light hydrocarbons, organic solvents, weakly corrosive clean process fluids.
Capacity: up to 4150 m³/h
Head: up to 270 m
Design pressure: up to Class 600 / PN110 (11.0 MPa)
Temperature: -70°C to +450°C (typical solvent service -40°C to +180°C)
Flange rating: ANSI Class 150 / Class 300 / Class 600
Speed: 1450 / 2950 r/min
Centerline mounting – casing expands evenly without misalignment, extremely low vibration; radial split, back pull‑out rotor – maintenance without disconnecting suction/discharge piping, significantly reduces downtime.
Double volute casing (large sizes) – automatically balances radial forces, smooth operation, low bearing load, high efficiency.
Heavy duty rigid shaft with short overhang – high stiffness, low deflection, suitable for frequent start/stop and variable operating conditions.
Heavy duty angular contact thrust bearings – oil lubrication, long continuous operation life.
API682 mechanical seal – bellows or cartridge design for solvent service, with flush Plan 11/21/23/52 to prevent vaporization, dry running, and leakage.
Explosion‑proof and anti‑static design – Ex d motor, anti‑static grounding, fully compliant with hazardous area safety codes.
Casing / volute: WCB, 304 stainless steel, 316L stainless steel, duplex.
Impeller: 304, 316L precision cast stainless steel.
Shaft: high strength stainless steel, corrosion resistant, fatigue resistant.
Mechanical seal: SiC/graphite, PTFE components – resistant to organic solvent swelling/corrosion.
NACE MR0175 available on request.
✔︎ True API610 OH2 international standard – global track record in refineries and chemical plants, mature and reliable.
✔︎ Excellent solvent compatibility – corrosion resistant metallurgy, anti‑vaporization seal design.
✔︎ Zero leakage for flammable solvents – API682 seal + proper flush plans, safe for hazardous areas.
✔︎ Easy maintenance – back pull‑out design, no pipe disassembly – short downtime.
✔︎ Low vibration, low noise – suitable for 24/7 continuous chemical service.
✔︎ Wide temperature and pressure coverage – from ambient solvents to high temperature process liquids.
✔︎ Proven in distillation reflux, reactor feed, tank farm transfer, and circulation loops.
Standard solvents (toluene/xylene/alcohols, ambient to 120°C) – 316L metallurgy, standard API682 seal, speed 2950 r/min.
High temperature / volatile solvents (120°C+) – reduce speed to 1450 r/min, specify metal bellows seal + Plan 23 flush.
Flammable / hazardous areas – explosion‑proof motor + anti‑static grounding + API682 seal with appropriate flush plan.
Strongly corrosive / chloride containing solvents – upgrade to duplex metallurgy.
Genuine KSB parts and factory‑trained service
16‑24 weeks delivery for engineered RPH pumps (depending on configuration)
Full documentation: performance curves, material certificates (EN10204 3.1), NPSH test, hydrotest, API682 cert, NACE (if required)
Long‑term service agreement and on‑site technical support
For API610 OH2 chemical solvent pump datasheet (KSB RPH), solvent transfer quotation, or reactor feed project support, please contact us:
info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.