The EAP series (Chemical Solvent version) is an API610 (10th/11th/12th edition) compliant OH2 horizontal single‑stage radial split centerline‑mounted overhung centrifugal pump, specially engineered for chemical solvents, corrosive liquids, flammable and volatile media in petrochemical, fine chemical, pharmaceutical, and pesticide industries – handling solvent transfer, circulation, reactor feed, and distillation reflux from -80°C to +300°C.
Toluene, xylene, ethanol, methanol, acetone, ethyl acetate, dichloromethane, isopropanol, and other low‑medium viscosity solvents (corrosive, flammable, clean, no solids).
Capacity: 2 – 2600 m³/h
Head: 30 – 250 m (up to 300 m on request)
Design pressure: 2.5 – 5.0 MPa (PN25 – PN50)
Temperature: -80°C to +300°C (typical solvent service -40°C to +180°C)
Flange rating: ANSI Class 150 – Class 300 (PN20 – PN50), RF/FF available
Speed: 1450 / 2950 r/min (2950 for low viscosity solvents, 1450 for high temperature)
Centerline mounting – casing expands evenly without misalignment, low vibration; radial split, back pull‑out rotor – maintenance without disconnecting piping, fast downtime recovery.
Double volute casing (DN80 and above) – balances radial forces for stable operation, higher efficiency.
High rigidity short overhang shaft – deflection ≤0.05 mm, resists bending, low vibration.
Corrosion resistant rotor – shaft sleeve and impeller in 304, 316L or duplex for solvent compatibility.
API682 cartridge mechanical seal – SiC/graphite/FKM/PTFE, specially selected for solvents (corrosive, volatile).
Flush plans – standard Plan 11/21/52 to prevent vaporization and leakage; seal chamber prepared for anti‑static or purge connections.
Anti‑corrosion design – all wetted parts fully corrosion resistant, no dead corners, easy to clean.
Explosion‑proof motor + anti‑static grounding – compliant with hazardous area requirements for flammable solvents.
Casing / volute: 304 (standard solvents), 316L (chloride/weak acid), duplex, Hastelloy (strongly corrosive).
Impeller / shaft sleeve: 304/316L, duplex, wear‑resistant alloy.
Shaft seal: API682 cartridge seal (SiC/graphite/FKM/PTFE).
Bearings: Oil lubricated with fin fan cooling, PT100 temperature monitoring.
NACE MR0175 available on request.
✔︎ True API610 OH2 with full corrosion resistance – centerline mounting, radial split, 316L standard – safe for aggressive solvents.
✔︎ Zero leakage, explosion safe – API682 seal + flush plan, anti‑static grounding, explosion‑proof motor.
✔︎ High efficiency, low NPSH – CFD optimized hydraulics, 5‑8% more efficient than standard chemical pumps.
✔︎ Fast maintenance – back pull‑out rotor, no pipe removal – reduces downtime.
✔︎ Cost‑effective domestic alternative – 30‑50% lower price than KSB RPH or Sulzer OHH, same API610 compliance, 12‑16 weeks delivery.
✔︎ Proven in refineries, fine chemical, pharmaceutical and pesticide plants – Sinopec, CNPC, Zhejiang Petrochemical references.
Standard solvents (toluene/xylene/ethanol, -40°C to 120°C) – EAP OH2, 316L metallurgy, flow 50‑500 m³/h, head 50‑150 m, speed 2950 r/min.
High temperature solvents (120‑300°C) – 316L + metal bellows seal + Plan 23 flush, speed 1450 r/min.
Strongly corrosive solvents (chlorinated, acidic) – duplex or Hastelloy metallurgy + high corrosion seal.
Flammable/hazardous areas – explosion‑proof motor + anti‑static grounding + API682 seal.
Spare parts for solvent transfer pumps, reactor feed, distillation reflux, solvent circulation
12‑16 weeks delivery for engineered EAP solvent pumps
Full documentation: performance curves, material certificates (EN10204 3.1), NPSH test, hydrotest, API682 cert, NACE (if required)
Long‑term service agreement and process assistance
For API610 OH2 chemical solvent pump datasheet, corrosive solvent transfer quotation, or reactor feed project support, please contact us:
info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.