API610 OH2 Cantilever Centrifugal Pump RPH (KSB Germany) | High Temperature Thermal Oil Pump for Refinery & Petrochemical Hot Oil Service

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
RPH (manufactured by KSB Germany) is an API610 OH2 horizontal single‑stage overhung centrifugal pump designed for high temperature thermal oil, heat transfer fluid, and hot process oil up to 450°C. Widely used in refinery heater circulation, petrochemical heat exchange, thermal fluid systems. Flow up to 4150 m³/h, head up to 270 m, design pressure up to 11.0 MPa (Class 600), temperature -70°C to +450°C. Centerline mounted casing eliminates thermal distortion; back pull‑out rotor for easy maintenance. Double volute (DN80+) balances radial forces. High rigidity short overhang shaft, deflection ≤0.05 mm. Fin/fan or water‑jacketed bearing housing with 40° angular contact thrust bearings – exceeds API requirements, bearing life ≥40,000 hours. API682 metal bellows cartridge seal with flush Plan 21/23/52 – zero leakage, no coking. Materials: WCB (≤300°C), 12CrMo (300‑450°C). Proven in global refineries and petrochemical plants – over one million installations. Email: info@hyrig.com

Conatct For Details
DetailReview(0)Additional

The RPH series, manufactured by KSB Germany, is an API610 (10th/11th/12th edition) compliant OH2 horizontal single‑stage radial split centerline‑mounted overhung centrifugal pump. It is globally recognized as a benchmark for high temperature thermal oil (heat transfer fluid), hot process oil, and heat medium circulation in refineries, petrochemical plants, chemical fiber, printing & dyeing, and thermal power stations – handling thermal fluid heater circulation, reactor jacket service, and refinery hot oil loops up to 450°C.

Typical Fluids

Thermal oil (diphenyl/diphenyl oxide, mineral oil, synthetic oil), heat transfer fluid, hot process oil, high temperature water (≤450°C), clean hot liquids.

Performance Range

  • Capacity: up to 4150 m³/h

  • Head: up to 270 m

  • Design pressure: up to 11.0 MPa (110 bar / Class 600)

  • Temperature: -70°C to +450°C (typical thermal oil service 250–350°C)

  • Flange rating: ANSI Class 150 – Class 600 (PN20 – PN110)

  • Speed: 1450 / 2950 r/min (low speed preferred for high temperature)

OH2 High Temperature Design Features (KSB RPH Thermal Oil Optimized)

  • Centerline mounting – casing expands evenly without misalignment, low vibration; radial split, back pull‑out rotor – maintenance without disconnecting piping.

  • Double volute casing (DN80 and above) – balances radial forces, stable high temperature operation, higher efficiency.

  • High rigidity short overhang shaft – deflection ≤0.05 mm, resists thermal bending, low vibration.

  • Heavy duty bearing housing with cooling – cast steel fin/fan or water jacket; 40° angular contact thrust bearings – exceeds API requirements, load capacity up to 50% higher, bearing life ≥40,000 hours. PT100 temperature monitoring included.

  • API682 cartridge mechanical seal – metal bellows design (graphite/SiC/FKM), specially selected for up to 450°C thermal oil.

  • Flush plans – standard Plan 21/23/52 to prevent coking, ensure zero leakage. Seal chamber has cooling/heating connections.

  • Thermal expansion design – all clearances calculated for high temperature; no galling or seizure.

Materials & Compliance

  • Casing / volute: WCB (≤300°C), 12CrMo (300‑450°C), 15CrMo for severe service.

  • Impeller: 304/316L, 12CrMo, wear‑resistant alloy.

  • Shaft seal: API682 metal bellows mechanical seal (SiC/graphite).

  • Bearings: Oil lubricated with fin fan or water cooling; life ≥40,000 hours.

  • NACE MR0175 available on request.

Why Choose RPH (KSB Germany) from Hyrig for Thermal Oil Service?

✔︎ Genuine KSB import quality – true API610 OH2 with over one million installations globally, proven in most demanding high temperature services.
✔︎ Superior high temperature performance – centerline mounting, rigid rotor, deflection ≤0.05 mm, minimal thermal distortion, low vibration.
✔︎ Zero leakage at 450°C – API682 metal bellows seal with flush Plans 21/23/52, no coking, no loss.
✔︎ Extended bearing life – 40° angular contact thrust bearings plus efficient cooling, life ≥40,000 hours.
✔︎ Fast maintenance – back pull‑out rotor removal without disconnecting pipes – reduces downtime.
✔︎ Higher efficiency – double volute + optimized hydraulics, 5‑8% more efficient than standard thermal oil pumps.
✔︎ Global project references – Sinopec, CNPC, Shell, ExxonMobil, Total, and all major refineries.

Comparison vs Domestic OH2 (EAP etc.)

  • RPH (KSB) – imported, premium materials, higher precision, more stable, higher price (30‑50% premium), longer delivery (16‑24 weeks).

  • EAP (domestic) – cost‑effective, faster delivery (12‑16 weeks), good performance for standard duties.

Selection Guide

  • High‑end / international projects (300‑450°C) – prefer RPH, flow 50‑1000 m³/h, head 50‑150 m, speed 1450 r/min.

  • Large flow (≥1000 m³/h) – RPH double volute + heavy duty bearing housing ensures stable high temperature operation.

Special Support for Global Refinery, Petrochemical & Thermal Fluid Projects

  • Genuine KSB parts and factory‑trained service

  • 16‑24 weeks delivery for engineered RPH pumps (depending on configuration)

  • Full documentation: performance curves, thermal expansion clearance reports, material certificates (EN10204 3.1), NPSH test, hydrotest, API682 cert, NACE (if required)

  • Long‑term service agreement and on‑site technical support available


For API610 OH2 thermal oil pump datasheet (KSB RPH), high temperature heat transfer fluid quotation, or global refinery project support, please contact us:
info@hyrig.com


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit