The EAP series is an API610 (10th/11th/12th edition) compliant OH2 horizontal single‑stage radial split centerline‑mounted overhung centrifugal pump, specially engineered for high temperature thermal oil (heat transfer fluid), hot process oil, and heat medium circulation in petrochemical, chemical fiber, printing & dyeing, and heating systems – handling thermal fluid heater circulation, heat exchange, reactor jacket service, and refinery hot oil loops.
Thermal oil (diphenyl/diphenyl oxide, mineral oil, synthetic oil), heat transfer fluid, hot process oil, high temperature water (≤450°C), clean hot liquids.
Capacity: 2 – 2600 m³/h
Head: 30 – 250 m (up to 300 m on request)
Design pressure: 2.5 – 5.0 MPa (PN25 – PN50)
Temperature: -80°C to +450°C (typical thermal oil service 250–350°C)
Flange rating: ANSI Class 150 – Class 300 (PN20 – PN50)
Speed: 1450 / 2950 r/min (low speed preferred for high temperature)
Centerline mounting – casing expands evenly without misalignment, low vibration; radial split, back pull‑out rotor – maintenance without disconnecting piping.
Double volute casing (DN80 and above) – balances radial forces, stable high temperature operation.
High rigidity short overhang shaft – deflection ≤0.05 mm, resists thermal bending, low vibration.
Heavy duty bearing housing with cooling – cast steel fin/fan or water jacket; PT100 temperature monitoring included.
API682 cartridge mechanical seal – metal bellows design (graphite/SiC/FKM), specially selected for up to 350°C+ thermal oil.
Flush plans – standard Plan 21/23/52 to prevent coking, ensure zero leakage. Seal chamber has cooling/heating connections.
Thermal expansion design – all clearances calculated for high temperature; no galling or seizure.
Casing / volute: WCB (≤300°C), Cr5Mo (300‑380°C), 12CrMo (380‑450°C), 304/316L for corrosive thermal oils.
Impeller: 304/316L, 12CrMo, wear‑resistant alloy.
Shaft seal: API682 metal bellows mechanical seal (SiC/graphite).
Bearings: Oil lubricated with fin fan or water cooling; life ≥40,000 hours.
NACE MR0175 available on request.
✔︎ True API610 OH2 high temperature design – centerline mounting, radial split, built for 450°C continuous service.
✔︎ Zero leakage at high temperature – API682 metal bellows seal with flush Plans 21/23/52, no coking, no loss.
✔︎ Rigid rotor, low vibration – deflection ≤0.05 mm, short overhang, high critical speed.
✔︎ Fast maintenance – back pull‑out rotor removal without disconnecting pipes – reduces downtime.
✔︎ Bearing life ≥40,000 hours – improved cooling design, temperature monitoring ready.
✔︎ Cost‑effective API610 compliance – 30–50% lower price than Sulzer OHH, Flowserve OH2, KSB RPH, same performance, faster delivery.
✔︎ Proven in petrochemical, chemical fiber, thermal fluid heater systems – Sinopec, CNPC, Zhejiang Petrochemical, Hengli references.
Standard thermal oil circulation (250–300°C) – EAP OH2 single stage, flow 50–500 m³/h, head 50–150 m, speed 1450 r/min.
High temperature thermal oil (300–450°C) – Cr5Mo/12CrMo casing + metal bellows seal + Plan 23 flush, 1450 r/min.
Large flow (≥1000 m³/h) – double volute casing + heavy duty bearings, ensure stable high temperature operation.
Spare parts for thermal fluid heater circulation pumps, reactor jacket oil pumps, heat exchanger circulation
12–16 weeks delivery for engineered high temp OH2 pumps
Full documentation: performance curves, thermal expansion clearance reports, material certificates (EN10204 3.1), NPSH test, hydrotest, API682 cert, NACE (if required)
Long‑term service agreement and on‑site technical support
For API610 OH2 thermal oil pump datasheet, high temperature heat transfer fluid quotation, or thermal fluid system project support, please contact us:
info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.