The Sulzer Type OHH is a horizontal, end suction, single stage, radially split, centerline mounted process pump designed for the most demanding heavy‑duty applications in petroleum refining, petrochemical, chemical processing, and gas processing industries. It fully complies with ISO 13709 (API 610) 11th Edition, Type OH2 – the global standard for overhung process pumps.
Hydraulic & Casing Features
End suction / Top centerline discharge – self‑venting casing eliminates vapour pockets, ensuring smooth start‑up and stable operation.
Optional top suction / top discharge configuration available for specific piping layouts.
Standard impellers are designed with Nss (suction specific speed) below 11,000. For applications requiring lower NPSH (net positive suction head available), most sizes offer higher Nss impellers to reduce NPSHr.
Optional “Coke Crusher” feature – proven design for services where coke particles or solids may be present, preventing plugging and extending run length.
Bearing System – Full API 610 Compliance
Standard: 7300 series 40° duplex angular contact thrust bearings with machined brass cages, paired with heavy‑duty ball radial bearings having C3 internal clearance.
Optional upgrade: 7300 series 40° triplex angular contact thrust bearings (machined brass cages) combined with heavy‑duty cylindrical roller radial bearings (C3) for even greater thrust capacity and radial rigidity.
Bearing housings are carbon steel with Inpro™ isolators as standard.
Cooling Options (for high temperature or high speed service)
Bearing cooling fan (air cooled)
Finned tube water‑cooling insert installed directly in the bearing housing reservoir
Heat sink for natural convection cooling
Bearing bracket slots for improved air flow
Water‑cooled seal oil reservoir
Refer to original Sulzer documentation (page B47) for application‑specific cooling recommendations.
Sealing & Flange Ratings
Full compliance with API 682 4th Edition (ISO 21049) – seal chamber dimensions and configurations are standard, allowing any API 682 cartridge mechanical seal to be fitted.
Standard flange rating: 300# RF (raised face).
For higher flange pressures (600# and above), refer to Sulzer’s High Pressure OHH design, ZF and ZU product lines.
Additional Design Highlights
Maximum component interchangeability within the OHH line – reduces spare parts inventory and maintenance complexity.
Designed to accommodate high temperatures and high suction pressures – centerline mounting minimises thermal growth misalignment.
Radially split casing allows easy rotor removal without disturbing piping.
Dynamically balanced rotor (ISO 1940 G2.5) for low vibration.
Typical Applications
Crude oil transfer and pipeline charge
Reflux, rundown, and product transfer in distillation units
Hydrocarbon feed to hydrotreaters and reformers
High temperature hot oil services
Amine, glycol, and other chemical process fluids
Any API 610 OH2 service where reliability, high temperature capability, and low NPSH are required
Why Choose Hyrig for the Sulzer Type OHH Pump?
Hyrig supplies high‑quality, fully interchangeable alternatives to the Sulzer OHH pump, meeting all API 610 OH2 dimensional and performance requirements. Our pumps feature the same robust bearing arrangements, cooling options, and coke crusher capability. We offer complete engineering support, custom material selection (duplex, 316L, Alloy 20, etc.), and seal plan optimisation to match your exact process conditions.
Need a technical datasheet, cross‑sectional drawing, or a competitive quote for the Sulzer Type OHH?
Contact us at info@hyrig.com – we respond within 24 hours.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.