The Sulzer Type HSA‑API is a horizontal, axially split, single stage, double suction, between‑bearing centrifugal pump designed and manufactured to meet ISO 13709 (API 610) 11th Edition, Type BB1 requirements. It brings full API 610 nozzle loads, seal chambers, bearing systems, and performance features to applications that were traditionally served by general industrial pumps. For limited deck space, a vertical shaft version (HSAv) is also available.
Casing & Hydraulic Design
Horizontal suction and discharge nozzles are cast integrally with the bottom half of the casing, simplifying piping alignment.
Dual volute casing (on all but the smallest sizes) balances radial thrust over the entire operating range, reducing shaft deflection and extending bearing and seal life.
Axially split casing allows easy disassembly for inspection and maintenance without disturbing suction or discharge piping.
Double suction impeller provides inherently lower NPSH (NPSH3) and balanced axial thrust, eliminating the need for complex thrust balancing devices.
Performance & Impeller Features
Dynamically balanced impeller (ISO 1940 G2.5).
Standard impellers have suction specific speed (Nss) below 11,000. For applications requiring even lower NPSH, higher Nss impellers are available using the “‑2” hydraulics option.
Replaceable case and impeller rings extend pump life. Integral wear surfaces are standard on 12% chromium impellers.
Seal Chamber & Shaft
Integral seal chamber with insert, operating at suction pressure.
Fully compliant with API 610 seal chamber dimensions, allowing any API 682 cartridge mechanical seal to be fitted without modification.
Classically stiff shaft with heavy‑duty shaft design as required by ISO 13709 (API 610) – minimum shaft deflection ensures long mechanical seal and bearing life.
Bearing System – Full API 610 Compliance
Standard: 7300 series 40° duplex angular contact thrust bearings with machined brass cages, combined with heavy‑duty ball radial bearings having C3 internal clearance.
Bearing isolators: INPRO™ or AES (depending on sourcing point) provide non‑contact labyrinth sealing to protect bearings from contamination.
Applications
Cooling water circulation (power plants, refineries, chemical complexes)
Tank farm transfer pumps (crude, product, intermediate storage)
Pipeline booster pumps (long distance liquid transport)
Power recovery (hydraulic turbine bypass or energy recovery systems)
General industrial fluid transfer where API 610 reliability is desired
Why Choose Hyrig for the Sulzer Type HSA‑API Pump?
Hyrig supplies high‑quality, fully interchangeable alternatives to the Sulzer HSA‑API BB1 pump. Our pumps meet or exceed API 610 requirements for nozzle loads, sealing, bearings, and vibration. With double suction impeller design, low NPSH capability, and robust between‑bearing support, the HSA‑API is ideal for continuous, high‑flow, low‑head applications that demand maximum reliability. We offer complete engineering support, material upgrades (duplex, 316L, bronze fitted), and seal plan optimisation.
Need a datasheet, cross‑sectional drawing, or a quotation for the Sulzer Type HSA‑API?
Contact us: info@hyrig.com – we respond within 24 hours.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.