HYRIG: China’s One‑Stop API 610 Centrifugal Pump Supplier – Full Range OH1‑OH6, BB1‑BB5, VS1‑VS7

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG is a China-based one-stop API 610 centrifugal pump supplier, offering full range OH1-OH6, BB1-BB5, VS1-VS7. All pumps comply with API 610 12th edition, serving refineries, petrochemical, coal chemical, and oil & gas. Services include engineering, skid delivery, installation, predictive maintenance, genuine spare parts, and import replacement. Contact info@hyrig.com.

Conatct For Details
DetailReview(0)Additional

HYRIG is a China‑based, full‑lifecycle solution provider focused exclusively on API 610 (ISO 13709) centrifugal pumps. We integrate R&D, precision manufacturing, custom packaging, testing, installation, commissioning, predictive maintenance, and genuine spare parts supply. We serve refineries, petrochemical, chemical, coal chemical, oil & gas, and other process industries, delivering high‑reliability pump systems that meet the latest API 610 editions (11th / 12th).


Complete API 610 Subtype Coverage: OH1 to OH6, BB1 to BB5, VS1 to VS7

HYRIG supplies all 18 standard API 610 subtypes in three major categories – Overhung (OH), Between Bearing (BB), and Vertically Suspended (VS). Below is the full list of pumps you can source from us:

OH Series (Overhung) – single‑stage, compact, general purpose

OH1, OH2, OH3, OH4, OH5, OH6

  • OH1: Foot‑mounted, horizontal end suction, flexible coupling

  • OH2: Centerline support, single bearing housing – the refinery/chemical workhorse

  • OH3: Vertical in‑line, separate bearing bracket, flexible coupling

  • OH4: Vertical in‑line, rigid coupling, high speed

  • OH5: Vertical close‑coupled, smallest footprint

  • OH6: High‑speed with gearbox, for high head

BB Series (Between Bearing) – multistage, high pressure, heavy duty

BB1, BB2, BB3, BB4, BB5

  • BB1: Horizontal 1‑2 stages, axially split casing

  • BB2: Horizontal 1‑2 stages, radially split casing, higher pressure

  • BB3: Multistage, axially split

  • BB4: Multistage radially split, segmental ring type

  • BB5: Double casing barrel pump – ultra‑high pressure, high temperature, hazardous media

VS Series (Vertically Suspended) – submerged, tank, wet pit, low NPSH

VS1, VS2, VS3, VS4, VS5, VS6, VS7

  • VS1: Single casing, wet pit / column pump

  • VS2: Single casing, volute type

  • VS3: Axial flow, high flow / low head

  • VS4: Separate discharge column with intermediate bearings

  • VS5: Separate discharge column, no intermediate bearings, top cantilever

  • VS6: Double casing can pump – improves NPSH, buried installation

  • VS7: Double casing, volute type for submerged high pressure

All above pumps – OH1, OH2, OH3, OH4, OH5, OH6, BB1, BB2, BB3, BB4, BB5, VS1, VS2, VS3, VS4, VS5, VS6, VS7 – are designed and manufactured in China strictly to API 610 11th/12th edition and ISO 13709.

HYRIG API 610 centrifugal pumps are widely used in:

  • Refineries: crude oil distillation, catalytic cracking, hydroprocessing, reforming, product transfer

  • Petrochemical plants: ethylene, propylene, aromatics, synthetic resins, fine chemicals

  • Coal chemical industry: coal-to-liquid, coal-to-gas, methanol, synthetic ammonia

  • Oil and gas fields: crude oil extraction, gathering and transportation, water injection, oil and gas processing

  • Other process industries: fine chemicals, pharmaceuticals, power generation, metallurgy, and other severe service conditions

One‑Stop Full Life‑Cycle Services (Not Just a Pump Maker)

HYRIG is more than a manufacturer. We provide a single‑source solution from selection to spare parts:

  1. Engineering & Customization – NPSH analysis, material selection (carbon steel, stainless, duplex, Alloy 20, Hastelloy, titanium), API 682 seal plans.

  2. Precision Manufacturing & Factory Testing – Hydrostatic test, performance test, vibration/noise check, mechanical seal run‑in – full test reports.

  3. Skid & Package Delivery – Pump + motor + coupling + baseplate + seal/lube/cooling + instrumentation – ready for plug & play.

  4. Installation & Commissioning – On‑site alignment, start‑up, operator training.

  5. Predictive Maintenance & Overhaul – Condition monitoring (vibration, temperature, pressure), fault diagnosis, reconditioning.

  6. Genuine Spare Parts Fast Supply – Impellers, shafts, wear rings, bearings, seals – OEM quality.

  7. Upgrade & Import Replacement – Energy retrofits, API 610 upgrade, cost‑effective local replacement for imported pumps.


Why Choose HYRIG for China API 610 Pumps (OH1‑OH6, BB1‑BB5, VS1‑VS7)?

  • Full standard compliance – API 610 latest edition, ISO 9001, API Q1.

  • Local manufacturing in China – shorter lead times, faster on‑site response, lower total cost of ownership compared to imported brands.

  • Single responsible party – from engineering to spare parts, reducing project risk.

  • Proven severe‑service capability – high temperature (450°C+), high pressure (barrel pumps to 500+ bar), corrosive, abrasive, low NPSH.

  • Typical applications – refineries (CDU, FCC, hydrotreating, hydrocracking), petrochemical (ethylene, aromatics), coal chemical (CTL, methanol, ammonia), oil & gas (crude transfer, water injection).


Contact HYRIG Today

If you are searching for China API 610 OH1‑OH6, BB1‑BB5, VS1‑VS7 centrifugal pumps, look no further. HYRIG delivers reliability, compliance, and long‑term partnership.

Email: info@hyrig.com
Let us support your critical rotating equipment with a total lifecycle solution – from the first inquiry to spare parts and beyond.


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit