China BB1 Pump – API 610 Horizontal Axially Split Double Suction Pump (Single or Two‑Stage, Between Bearings, Large Flow)

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
We are a professional China BB1 pump manufacturer producing API 610 compliant horizontal axially split (horizontal split case) double suction pumps. Single‑stage or two‑stage, between‑bearings support. The casing splits vertically – internal parts accessible without removing piping. Large flow, medium/low pressure. One‑stop service.

Conatct For Details
DetailReview(0)Additional

We are a professional China BB1 pump manufacturer, offering high‑quality API 610 compliant horizontal axially split (horizontal split case) centrifugal pumps. Our BB1 series features a single‑stage or two‑stage, double suction impeller design with between‑bearings support. The casing splits horizontally along the axial plane – the top half can be removed without disturbing suction or discharge piping, providing exceptional maintenance access. This makes the BB1 the preferred choice for large flow, medium to low pressure applications such as circulating water systems, crude oil transfer, cooling water, and flood control.

What is a BB1 Pump?

According to API 610, the BB1 pump is a horizontal, axially split (horizontal split case), between‑bearings pump. Key characteristics:

  • Horizontal split casing – the casing is divided along the horizontal centerline; the upper half lifts off for rotor inspection without disconnecting pipework.

  • Double suction impeller (first stage, and second stage if two‑stage) – hydraulic axial thrust is balanced, allowing higher flow rates with lower bearing loads.

  • Single or two‑stage – single‑stage covers most large flow duties; two‑stage provides higher head while retaining the split case advantage.

  • Between‑bearings support – bearings are located at both ends of the shaft, offering excellent rotor stability for large, heavy impellers.

Why Choose Our China BB1 Pump?

When you search for a reliable China BB1 pump manufacturer, you need a supplier who delivers API 610 quality, large flow capability, and easy on‑site maintenance. Our BB1 pumps are engineered for:

  • Very large flow rates (typically 500 – 10,000+ m³/h)

  • Medium to low pressure (head up to 200‑250 meters for two‑stage designs)

  • Easy maintenance – remove the top casing half without breaking pipe flanges

  • Double suction impeller – lower NPSH requirements and balanced axial thrust

  • Continuous heavy‑duty service in refineries, pipelines, power plants, and water utilities

Designed for Typical Working Conditions

Our China BB1 pumps run reliably in:

  • Large volume circulating water systems (power stations, district cooling, industrial plants)

  • Crude oil transfer pipelines (low to medium pressure, large flow)

  • Cooling water intake and return services

  • Flood control and drainage pumping stations

  • Raw water supply for municipal or industrial use

  • Medium/low head refinery services (e.g., tank farm transfer, wash water)

  • Continuous 24/7 operation at high flow rates

Compatible Media

The BB1 pump handles clean or slightly contaminated liquids, including:

  • Fresh water, river water, cooling water, circulating water

  • Crude oil (with appropriate material selection – carbon steel or stainless steel clad)

  • Light hydrocarbons (low viscosity, low pressure)

  • Sea water (with duplex or super duplex materials)

  • Industrial service water

  • Condensate (large volume)

  • Non‑abrasive process fluids

Key Technical Features

  • Standard: API 610 (11th edition), API 682 for mechanical seals

  • Design: Horizontal, axially split (horizontal split case), single‑stage or two‑stage, double suction impeller, between bearings

  • Casing split: Horizontal – top half removable without disturbing piping

  • Flow: 500 – 15,000 m³/h (customizable; larger on request)

  • Head: Single‑stage up to 150 m; two‑stage up to 250‑300 m

  • Temperature: -40°C to +200°C (higher with special materials)

  • Pressure rating: Up to 5.0 MPa (Class 300 / 600 available)

  • Materials: Cast iron, ductile iron, carbon steel (WCB, LCC), stainless steel (304, 316, duplex, super duplex)

  • Flanges: ANSI, ASME, DIN, JIS (suction and discharge often larger size, up to 48″)

  • Bearings: Split sleeve bearings (oil lubricated) with forced or ring oil lubrication

  • Shaft sealing: Mechanical seals per API 682 (single, double, or tandem) or gland packing

Product Advantages

  • Maintenance without pipe removal – the horizontal split casing allows full access to impeller, wear rings, and shaft seals by lifting the top half; suction and discharge piping stay in place.

  • Double suction impeller – inherently balanced axial thrust, reducing bearing loads and extending component life.

  • Very large flow capability – BB1 is the go‑to API 610 type for flows exceeding what overhung pumps can handle.

  • Between‑bearings rotor – superior stiffness and stability for large diameter impellers, lower vibration.

  • Lower NPSH requirements – double suction design improves suction performance compared to single suction pumps of similar capacity.

  • Cost‑effective for big flows – significantly lower cost per m³/h than multistage or high‑speed pumps.

  • API 610 reliability – built for continuous heavy‑duty industrial service.

One‑Stop Full Service

As a leading China BB1 pump manufacturer, we provide a complete one‑stop service for large flow pumps:

  1. Selection & hydraulic design – specialized software for large pump efficiency and NPSH analysis.

  2. Custom design – two‑stage configuration, special alloys, higher pressure rating, oversized flanges.

  3. Manufacturing – heavy machining capacity for large casings (up to 60″ flanges), strict API 610 quality plan.

  4. Factory testing – hydrostatic test, performance test (up to high power), NPSH test (optional).

  5. Delivery – lead time depends on size; standard large BB1 pumps 12–20 weeks; expedited possible.

  6. Installation & commissioning – on‑site supervision for heavy pump alignment and baseplate grouting.

  7. After‑sales – spare rotor, wear rings, bearings, mechanical seals, field repair service.

Main Applications

  • Power plant circulating water pumps (cooling tower and condenser cooling)

  • Crude oil pipeline transfer pumps (medium pressure, large volume)

  • Water intake and distribution stations (municipal, industrial)

  • Flood control and drainage pumping stations

  • Refinery cooling water and service water systems

  • Petrochemical plant large volume transfer (cooling water, wash water)

  • District heating/cooling distribution pumps

  • Steel mill cooling water circuits

  • Irrigation and land drainage projects

Frequently Asked Questions (FAQ)

Q: What is the main difference between BB1 and BB2 pumps?
A: BB1 is axially split (horizontal split case) – the casing splits along the horizontal centerline, allowing maintenance without removing piping. BB2 is radially split (barrel or between‑bearings radially split) – the casing is solid or end‑to‑end split, typically used for higher pressures (>5 MPa). For large flow / medium/low pressure, BB1 is often more convenient. For high pressure (e.g., pipeline booster), BB2 is preferred.

Q: Can I inspect the impeller without disconnecting the piping?
A: Yes. One of the biggest advantages of the BB1 horizontal split case design is that you simply unbolt and lift the upper casing half – suction and discharge flanges remain connected to the piping. This dramatically reduces maintenance downtime.

Q: Is your BB1 pump available in two‑stage configuration?
A: Yes. Our BB1 pumps are available as single‑stage (most common for high flow / low head) or two‑stage (for higher head while retaining the split case advantage). Two‑stage BB1 pumps use two double suction impellers or a combination depending on design.

Q: What materials do you recommend for crude oil service?
A: For sweet crude with low H₂S, carbon steel (WCB/LCC) with appropriate mechanical seals (API 682) is standard. For sour crude or corrosive conditions, we recommend stainless steel clad, duplex, or 316SS. Please provide your fluid analysis for a precise recommendation.

Q: How do you handle very large flows (>10,000 m³/h)?
A: We have manufacturing capacity for large pumps with flanges up to 60″ (1500 mm) and flows exceeding 15,000 m³/h. These pumps typically require custom engineering and longer lead times. Contact us with your duty point.

Q: Do you supply the complete pump with baseplate and motor?
A: Yes, we supply complete pump units including fabricated steel baseplate, motor (NEMA or IEC), coupling, coupling guard, and all auxiliary piping. Installation supervision and commissioning are included in our one‑stop service.

Why Choose Us as Your China BB1 Pump Supplier

  • Specialized in large API 610 pumps – we have the heavy machining and testing facilities required for BB1 sizes

  • True one‑stop service – from hydraulic selection to on‑site commissioning

  • Competitive pricing – typically 30‑40% lower than European/US brands with same API 610 quality

  • Fast after‑sales support – local China response, plus global shipping of spare parts

  • Custom two‑stage designs – when you need more head but want to keep the split case convenience

  • Full documentation – performance curves, NPSH curves, vibration & bearing temp records, material certificates

Contact Us

For inquiries, technical support, or a custom quotation for our China BB1 pump (large flow, horizontal split case, double suction), please contact us at:
info@hyrig.com

Choose our China BB1 pump – horizontal split case convenience, double suction performance, and unbeatable value for large flow circulating water and crude oil transfer.



Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit