Fourth Reactor Tempering Water Pump BB1

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
The BB1 fourth reactor tempering water pump is an API 610 Type BB1 horizontal axially split, single stage centrifugal pump designed for high pressure tempering water circulation in multi‑bed reactors (e.g., fourth reactor bed). Flow range 50-800 m³/h, head up to 250 m, temperature range 50°C to 200°C, design pressure up to 100 bar. Wetted parts in carbon steel or 316SS. Mechanical seal with API Plan 21/23/53. Hydraulic efficiency ≥75%, MTBF ≥8000 hours. Reliable injection of tempering water to control exothermic reaction temperature in the final reactor bed.

Conatct For Details
DetailReview(0)Additional

The BB1 Fourth Reactor Tempering Water Pump is a heavy duty, API 610 (ISO 13709) Type BB1 horizontal, axially split, single stage centrifugal pump specifically engineered for tempering water circulation service in multi‑bed catalytic reactors – such as those found in hydrocrackers, hydrotreaters, methanol synthesis, ammonia plants, and other highly exothermic processes. It reliably delivers high pressure tempering (quench) water to the fourth (often the final or bottom) reactor bed to precisely control inter‑bed temperatures, protect catalyst from thermal degradation, and ensure optimal reactor performance across all beds.

Key Performance Parameters (Typical for Fourth Reactor Tempering Water Service)

  • Flow range: 50 – 800 m³/h (depending on reactor size and tempering demand)

  • Head range: Up to 250 m (approximately 820 ft) – sufficient to overcome reactor pressure drop and system resistance, often higher due to accumulated pressure loss in upstream beds

  • Speed: 1,450/1,750 RPM or 2,950/3,550 RPM (based on duty point)

  • Power range: 45 – 450 kW (varies with flow, head, and water density)

Process Compatibility (Reactor Tempering Water Service – Fourth Bed)

  • Temperature range: 50°C to 200°C (122°F to 392°F) – typical for warm tempering water injection.

  • Design pressure: Up to 100 bar (1,450 psi) – suitable for high pressure reactor circuits; fourth bed may operate at slightly lower pressure than upstream beds due to pressure drop, but pump design pressure must accommodate inlet conditions.

  • Media handled: Demineralized water, boiler feed water, treated tempering water (may contain trace ammonia, hydrogen, or corrosion inhibitors).

  • Wetted materials: Carbon steel (C‑6) – standard; 12% chrome (C‑12) or 316 stainless steel (S‑6) for higher corrosion resistance or hydrogen service.

Reliability & Efficiency

  • Sealing system: Mechanical seal (double or tandem) with API flush plans – typically Plan 21 (cooling), Plan 23 (high temperature jacketed), or Plan 53 (pressurized double seal with barrier fluid) for high pressure water/hydrogen environment.

  • Hydraulic efficiency: ≥75% at best efficiency point (BEP) – BB1 design inherently provides high efficiency with low radial loads.

  • NPSHr: Low NPSH characteristics – axial split design allows optimized suction conditions, critical for the fourth bed where available NPSH may be lower.

  • MTBF: ≥8000 hours – essential for continuous reactor operation with minimal downtime.

Mechanical Design (API 610 BB1 Features for Tempering Water Service – Fourth Bed)

  • Configuration: Single stage, horizontal, axially split (between bearing) casing – allows removal of upper half for internal inspection without disturbing piping.

  • Casing type: Axially split, double volute (reduces radial thrust at off‑BEP operation) – standard for BB1 pumps.

  • Inlet/Outlet: Suction and discharge flanges located in lower casing half – both can be oriented vertically or horizontally as per plant layout.

  • Flange rating: Class 600, 900, or 1500 RF (ANSI/ASME) – based on design pressure.

  • Design standard: API 610 11th/12th edition (ISO 13709) – full compliance.

  • Rotor: Double suction impeller (hydraulically balanced) – eliminates axial thrust without need for thrust bearings. Dynamically balanced to ISO 1940 Grade G2.5.

  • Shaft: Large diameter, rigid shaft with minimal deflection – extends seal and bearing life.

  • Bearings: Hydrodynamic tilting pad or anti‑friction rolling element bearings (depending on speed and load). Forced oil lubrication optional for large pumps.

  • Seal chamber: API 682 compliant, sized for large bore cartridge mechanical seals.

  • Maintenance: Horizontal split design – upper casing half can be removed to access rotor without disconnecting piping or driver.

  • Wear rings: Renewable casing and impeller wear rings (hard coated options available) to maintain hydraulic efficiency over pump life.

Why Choose This BB1 Fourth Reactor Tempering Water Pump?

For tempering water injection into the fourth (or final) bed of high pressure catalytic reactors, the BB1 pump delivers exceptional reliability, high efficiency, and easy maintenance access. Its API 610 axial split construction, double suction impeller for zero net axial thrust, and robust high pressure capabilities make it the preferred choice for critical reactor tempering service – ensuring precise temperature control across all beds, even in the most demanding exothermic reaction environments.

Need more information or a quotation?
Please contact us at: info@hyrig.com
Our engineering team is ready to provide technical data, selection support, and after‑sales service. Please specify your required flow, head, operating temperature and pressure, water quality, and reactor loop details for a precise recommendation.


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit