The BB2 Third Reactor Quench Pump is a heavy duty, API 610 (ISO 13709) Type BB2 horizontal, radially split, between‑bearings centrifugal pump specifically engineered for high pressure quench injection into multi‑bed catalytic reactors – including hydrocrackers, hydrotreaters, and other exothermic processes. It reliably delivers quench medium (typically hydrogen‑rich recycle gas, liquid hydrocarbon, or water) to the third (or intermediate) reactor bed to precisely control inter‑bed temperatures, prevent hot spots, protect catalyst activity, and maintain optimal reactor performance.
Key Performance Parameters (Typical for Third Reactor Quench Service)
Flow range: 20 – 600 m³/h (depending on quench demand and reactor size)
Head range: Up to 400 m (approximately 1,310 ft) – to overcome high reactor differential pressure
Speed: 1,450/1,750 RPM or 2,950/3,550 RPM (based on duty point)
Power range: 30 – 350 kW (varies with flow, head, and quench medium density)
Process Compatibility (Reactor Quench Service – Third Bed)
Temperature range: 50°C to 300°C (122°F to 572°F) – suitable for hot quench streams.
Design pressure: Up to 200 bar (2,900 psi) – compatible with high pressure hydroprocessing reactor circuits.
Media handled: Hydrogen‑rich recycle gas, light hydrocarbon quench liquid, quench water, or mixtures (often containing H₂S, NH₃).
Wetted materials: 316 stainless steel (S‑6) or duplex (S‑8) – for hydrogen service and sour corrosion resistance. Higher alloys (Alloy 20, Inconel, Hastelloy) available for severe environments.
Reliability & Efficiency
Sealing system: Mechanical seal (double or tandem) with API flush plans – typically Plan 21 (cooling), Plan 23 (high temperature jacketed), or Plan 53 (pressurized double seal with barrier fluid) for high pressure hydrogen service.
Hydraulic efficiency: ≥72% at best efficiency point (BEP) – BB2 design offers excellent efficiency with low pulsation.
NPSHr: Optimized low NPSH characteristics – critical for high temperature quench media.
MTBF: ≥8000 hours – essential for continuous reactor operation with minimal downtime.
Mechanical Design (API 610 BB2 Features for Quench Service)
Configuration: Single stage or two‑stage, horizontal, radially split (between‑bearings) casing – heavy wall construction for high pressure containment.
Casing type: Radially split (barrel or segmental ring type) – provides excellent pressure containment and allows internal access by removing the end cover.
Inlet/Outlet: Suction and discharge flanges located on the casing – typically top‑top or side‑side orientation based on plant layout.
Flange rating: Class 900, 1500, or 2500 RF (ANSI/ASME) – to accommodate design pressures up to 200 bar.
Design standard: API 610 11th/12th edition (ISO 13709) – full compliance.
Rotor: Single or two‑stage impellers (overhung or between‑bearings). For BB2, impellers are mounted on a shaft supported by bearings at both ends. Dynamically balanced to ISO 1940 Grade G2.5 (or higher).
Shaft: Large diameter, rigid shaft with minimal deflection (<0.05 mm) – critical for high pressure hydrogen environment.
Bearings: Hydrodynamic tilting pad bearings or heavy duty rolling element bearings (depending on speed and radial loads). Forced oil circulation lubrication for high speed or high temperature applications.
Seal chamber: API 682 compliant, designed for large bore cartridge mechanical seals to accommodate Plan 23/53.
Maintenance: Radial split design – end cover removal allows access to rotor without disturbing major piping (but suction/discharge may require disconnection). Typically, the entire rotor can be withdrawn axially after removing the coupling and bearing housings.
Wear rings: Renewable casing and impeller wear rings with hard coating (e.g., Colmonoy) to maintain hydraulic efficiency and resist hydrogen erosion.
Why Choose This BB2 Third Reactor Quench Pump?
For high pressure quench injection into the third (or intermediate) bed of multi‑bed reactors, the BB2 pump delivers superior pressure containment, high reliability, and excellent hydraulic performance. Its API 610 radial split, between‑bearings construction provides exceptional stability under high pressure and temperature, making it the industry standard for critical quench services in hydrocrackers, hydrotreaters, and other high severity reactor loops.
Need more information or a quotation?
Please contact us at: info@hyrig.com
Our engineering team is ready to provide technical data, selection support, and after‑sales service. Please specify your required flow, head, quench medium (gas/liquid), operating temperature and pressure, and hydrogen/H₂S content for a precise recommendation.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.