BFW Pumps BB5

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
The BB5 boiler feed water pump is an API 610 Type BB5 horizontal, radially split, barrel multistage centrifugal pump designed for high pressure boiler feed water service in refineries, petrochemical plants, power stations, and industrial steam systems. Flow range 20-800 m³/h, head up to 3,500 m, temperature up to 200°C+, design pressure up to 350 bar. Wetted parts in carbon steel or 12% chrome. Mechanical seal with API flush plans. Hydraulic efficiency ≥75%, MTBF ≥8000 hours. Reliable for high pressure BFW to steam generators and HRSG.

Conatct For Details
DetailReview(0)Additional

The BB5 Boiler Feed Water Pump is a heavy duty, API 610 (ISO 13709) Type BB5 horizontal, radially split, barrel multistage centrifugal pump specifically engineered for high pressure boiler feed water service in petroleum refineries, petrochemical plants, thermal power stations, combined cycle plants, and industrial steam generation facilities. It reliably delivers high pressure feed water to steam boilers, heat recovery steam generators (HRSG), and high pressure process steam systems.

Key Performance Parameters (Typical for BFW Service)

  • Flow range: 20 – 800 m³/h (depending on boiler steam demand)

  • Head range: Up to 3,500 m (approximately 11,500 ft) – for high pressure steam generation

  • Number of stages: 4 to 15 stages (customized based on required head)

  • Speed: 2,950/3,550 RPM (high speed for compact multistage design) or 1,450/1,750 RPM with larger frame

  • Power range: 75 – 5,000 kW (varies with flow, head, and water density)

Process Compatibility (Boiler Feed Water Service)

  • Temperature range: Ambient to 200°C+ (up to 230°C with special materials) – typical BFW temperature from deaerator (approx. 85-150°C).

  • Design pressure: Up to 350 bar (5,075 psi) – compatible with ultra‑high pressure boiler circuits.

  • Media handled: Deaerated boiler feed water, demineralized water, condensate, treated water with oxygen scavengers and pH adjusters.

  • Wetted materials: Carbon steel (C‑6) – standard for moderate temperatures; 12% chrome (C‑12) for higher temperature and erosion resistance; optional 316SS or duplex for corrosive service.

Reliability & Efficiency

  • Sealing system: Mechanical seal (double or tandem) with API flush plans – typically Plan 21 (cooling), Plan 23 (high temperature jacketed), or Plan 53 (pressurized double seal). For very high pressure, controlled pressure mechanical seals or floating ring seals may be used.

  • Hydraulic efficiency: ≥75% at best efficiency point (BEP) – multistage design provides excellent efficiency at high heads.

  • NPSH: First stage impeller designed for low NPSHr – often with inducer or special suction impeller to meet BFW deaerator suction conditions.

  • MTBF: ≥8000 hours (often >3 years continuous operation in power plants) – essential for base load steam generation.

Mechanical Design (API 610 BB5 Features for BFW Service)

  • Configuration: Multistage, horizontal, radially split barrel (between‑bearings) casing – the outer barrel contains the internal stage assembly (diffusers, impellers, shaft, interstage bushings).

  • Casing type: Radially split barrel – provides excellent pressure containment (up to 350 bar) and allows internal cartridge removal without disturbing piping.

  • Inlet/Outlet: Suction and discharge flanges located on the outer barrel – typically top‑top or side‑side orientation.

  • Flange rating: Class 900, 1500, 2500, or higher (custom) – based on required discharge pressure.

  • Design standard: API 610 11th/12th edition (ISO 13709) – full compliance.

  • Rotor: Multiple impellers mounted on a single shaft, arranged in opposed orientation (back‑to‑back) for axial thrust balance. Dynamically balanced to ISO 1940 Grade G1.0 or G2.5.

  • Diffusers: Stationary diffusers between stages convert velocity to pressure with high efficiency.

  • Shaft: Large diameter, rigid shaft with minimum deflection – supported by bearings at both ends.

  • Bearings: Hydrodynamic tilting pad journal bearings (for high speed) and heavy duty thrust bearings (for residual axial load). Forced oil lubrication system with cooler, filters, and pressure/temperature instrumentation.

  • Seal chamber: API 682 compliant – sized for large bore cartridge mechanical seals.

  • Interstage bushings: Replaceable bushings between stages to control leakage and maintain efficiency.

  • Maintenance: Cartridge design – the entire internal rotating assembly (rotor + diffusers) can be removed from the barrel casing axially after removing the end cover, allowing overhaul without disturbing suction/discharge piping.

  • Wear rings: Renewable hardened wear rings on impellers and diffusers to maintain hydraulic efficiency over pump life.

Why Choose This BB5 Boiler Feed Water Pump?

For high pressure boiler feed water service demanding ultra‑high heads and continuous reliability, the BB5 barrel multistage pump delivers exceptional performance. Its API 610 radial split barrel construction, multistage efficiency, cartridge maintainability, and robust high pressure capabilities make it the industry standard for critical BFW applications in refineries, petrochemical plants, and power generation facilities.

Need more information or a quotation?
Please contact us at: info@hyrig.com
Our engineering team is ready to provide technical data, selection support, and after‑sales service. Please specify your required flow, discharge head (or pressure), suction conditions, feed water temperature, and driver type (motor/steam turbine) for a precise recommendation.



Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit