The BB2 Transfer and Circulation Pump is a heavy duty, API 610 (ISO 13709) Type BB2 horizontal, radially split, between‑bearings multistage centrifugal pump specifically engineered for high pressure transfer and circulation services in petroleum refineries, petrochemical complexes, chemical plants, and oil & gas facilities. It reliably handles clean or mildly contaminated, high or low temperature, corrosive or non‑corrosive liquids across a wide range of demanding industrial applications.
Key Performance Parameters (Typical for Transfer & Circulation Service)
Flow range: 10 – 800 m³/h (customizable based on process demand)
Head range: Up to 600 m (approximately 1,970 ft) – for high pressure systems
Number of stages: 2 to 8 stages (depending on required head)
Speed: 1,450/1,750 RPM or 2,950/3,550 RPM
Power range: 11 – 800 kW (varies with flow, head, and fluid density)
Process Compatibility (Transfer & Circulation Service)
Temperature range: -40°C to 400°C (-40°F to 752°F) – suitable for cryogenic to high temperature applications.
Design pressure: Up to 250 bar (3,625 psi) – compatible with high pressure transfer and circulation loops.
Media handled: Hydrocarbons (crude oil, diesel, gasoline, naphtha, gas oil), chemicals, solvents, hot oils, amines, water, condensate, and other industrial fluids.
Wetted materials: Carbon steel (C‑6) – standard; 12% chrome (C‑12) for higher temperature/erosion; 316 stainless steel (S‑6) for corrosion resistance; duplex (S‑8) for sour service.
Reliability & Efficiency
Sealing system: Mechanical seal (single, double, or tandem) with API flush plans – typically Plan 11, 21, 23, 52, or 53 based on service conditions.
Hydraulic efficiency: ≥70% at best efficiency point (BEP) – multistage design provides excellent efficiency at high heads.
NPSHr: Optimized low NPSH characteristics – first stage impeller designed for typical suction conditions.
MTBF: ≥8000 hours – supports continuous 24/7 operation with minimal maintenance.
Mechanical Design (API 610 BB2 Features for Transfer & Circulation Service)
Configuration: Multistage, horizontal, radially split, between‑bearings casing – heavy wall construction for high pressure containment.
Casing type: Radially split (barrel or segmental ring type) – provides excellent pressure containment and allows internal access by removing the end cover.
Inlet/Outlet: Suction and discharge flanges located on the casing – typically top‑top or side‑side orientation.
Flange rating: Class 300, 600, 900, 1500 RF (ANSI/ASME) – based on design pressure.
Design standard: API 610 11th/12th edition (ISO 13709) – full compliance.
Rotor: Multiple impellers mounted on a single shaft, arranged in opposed orientation (back‑to‑back) for axial thrust balance. Dynamically balanced to ISO 1940 Grade G2.5.
Diffusers: Stationary diffusers between stages convert velocity to pressure with high efficiency.
Shaft: Large diameter, rigid shaft with minimal deflection – supported by bearings at both ends.
Bearings: Hydrodynamic tilting pad journal bearings or heavy duty rolling element bearings. Oil lubrication (splash or forced) with optional cooling.
Seal chamber: API 682 compliant – sized for cartridge mechanical seals.
Interstage bushings: Replaceable bushings to control leakage between stages.
Maintenance: Radial split design – end cover removal allows access to rotor. The entire rotating assembly can be withdrawn axially for overhaul.
Wear rings: Renewable hardened wear rings to maintain hydraulic efficiency.
Applications (Typical Transfer & Circulation Services)
Pipeline transfer pumps – moving crude, refined products, or chemicals between storage and processing units
Reactor feed pumps – delivering feed to high pressure reactors
Column bottoms circulation – circulating bottoms liquid for reboiler feed
High pressure loop circulation – in hydrocrackers, hydrotreaters, and similar units
Charge pumps – feeding downstream equipment requiring high discharge pressure
Heat transfer fluid circulation – for hot oil or synthetic thermal fluid systems
Slop oil transfer – handling hydrocarbon mixtures from collection points
Why Choose This BB2 Transfer and Circulation Pump?
For high pressure transfer and circulation applications in refineries, petrochemical plants, and industrial facilities, the BB2 pump delivers exceptional reliability, high efficiency, and robust pressure containment. Its API 610 radial split, multistage construction provides stable operation across a wide flow range, making it the preferred choice for demanding transfer and circulation duties where high head, moderate flow, and continuous operation are required.
Need more information or a quotation?
Please contact us at: info@hyrig.com
Our engineering team is ready to provide technical data, selection support, and after‑sales service. Please specify your required flow, head, fluid properties, operating temperature, and pressure for a precise recommendation.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.