Butylene Condensate Water Pump OH2

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
butylene-condensate-water-pump-oh2
Conatct For Details
DetailReview(0)Additional

The Butylene Condensate Water Pump OH2 is a heavy duty, API 610 (ISO 13709) Type OH2 horizontal overhung centrifugal pump specifically engineered for handling condensate water containing trace butylene, light hydrocarbons, and associated process residues in butylene production units, petrochemical plants, and refineries. It reliably pumps condensate from steam condensate pots, phase separators, knockout drums, and heat exchanger drains to collection systems or further treatment.

Key Performance Parameters (Typical for Butylene Condensate Service)

  • Flow range: 10 – 300 m³/h (depending on plant condensate load)

  • Head range: Up to 120 m (approximately 400 ft)

  • Speed: 1,450/1,750 RPM or 2,950/3,550 RPM

  • Power range: 5.5 – 90 kW (varies with flow, head, and fluid density)

Process Compatibility (Butylene Condensate Service)

  • Temperature range: 10°C to 90°C (50°F to 194°F) – typical for warm condensate from butylene processes.

  • Design pressure: Up to 20 bar (290 psi) – suitable for condensate system pressures.

  • Media handled: Condensate water with trace butylene, butane, isobutylene, light hydrocarbons, steam condensate, and water/hydrocarbon mixtures.

  • Wetted materials: Carbon steel (S-1) – standard; 316 stainless steel (S-6) recommended for higher corrosion resistance or where chloride/hydrocarbon interactions may occur.

Reliability & Efficiency

  • Sealing system: Mechanical seal (single or double cartridge) with API flush plans – typically Plan 11 (internal recirculation) or Plan 21 (cooling). Double seal (Plan 52/53) recommended for hydrocarbon service to prevent emissions.

  • Hydraulic efficiency: ≥72% at best efficiency point (BEP)

  • NPSHr: ≤4.0 m – low NPSH design for condensate service with limited suction head.

  • MTBF: ≥8000 hours – supports continuous plant operation.

Mechanical Design (API 610 OH2 Features for Butylene Condensate Service)

  • Configuration: Single stage, overhung, horizontal, centerline mounted (optional foot mounted for low temperature), radially split casing.

  • Inlet/Outlet: Suction 2″–6″, discharge 1.5″–4″ (customizable based on flow)

  • Flange rating: Class 150 or Class 300 RF (ANSI/ASME)

  • Design standard: API 610 11th/12th edition (ISO 13709) – full compliance.

  • Rotor support: Rigid shaft with minimal deflection – extends seal and bearing life.

  • Bearing housing: Fan cooled (standard); water cooling optional for higher temperatures.

  • Seal chamber: API 682 compliant, sized for cartridge mechanical seals.

  • Maintenance: Back pull-out design – pump internals removable without disturbing suction/discharge piping or driver.

  • Impeller: Closed radial, dynamically balanced, with renewable wear rings.

Why Choose This OH2 Butylene Condensate Water Pump?

For butylene plant condensate handling, this OH2 pump delivers reliable, low-maintenance performance with API 610 heavy duty construction. Its corrosion-resistant material options, robust sealing for hydrocarbon service, and low NPSHr make it the ideal choice for safe and efficient transfer of butylene‑contaminated condensate.

Need more information or a quotation?
Please contact us at: info@hyrig.com
Our engineering team is ready to provide technical data, selection support, and after‑sales service. Please specify your required flow, head, operating temperature, and condensate composition for a precise recommendation.



Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit