Sulzer Type BBS (API 610 BB2 Radially Split Double Suction Process Pump)

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
The Sulzer Type BBS is an API 610 BB2 horizontal, single stage, double suction, radially split, centerline mounted process pump for heavy duty refinery, petrochemical, and gas processing applications. Features top suction/top discharge casing (TT) with optional side suction/discharge configurations. Double suction first stage impeller provides low NPSH and axial thrust balance. Classically stiff shaft as per API 610. Standard impeller Nss <11,000; higher Nss available in CD version for lower NPSH. Optional coke crusher. Standard bearings: 7300 series 40° duplex angular contact thrust bearings (brass cages) + heavy‑duty ball radial bearings (C3). Optional sleeve/bearings and lube systems. INPRO™ bearing isolators standard. Various cooling options: fan, finned tube water‑cooling inserts, heat sink fan, slotted bearing brackets. Flange ratings: ANSI B16.5 CL300 standard; CL600/CL900 available on CD version. Maximum component interchangeability. Handles high temperatures and suction press
Conatct For Details
DetailReview(0)Additional

The Sulzer Type BBS is a horizontal, single stage, double suction, radially split, centerline mounted process pump designed for the most demanding heavy‑duty applications in petroleum refining, petrochemical, and gas processing industries. It fully complies with ISO 13709 (API 610) 11th Edition, Type BB2 – the standard for between‑bearing, radially split process pumps.

Casing & Nozzle Configurations

  • Standard: Top suction / Top discharge (TT) casing with back face machining on flanges.

  • Optional configurations:

    • Side Suction / Side Discharge, same side (SSSS)

    • Side Suction / Side Discharge, opposite side (SSOS)

    • Side Suction / Top Discharge (ST)

  • Radially split casing allows rotor removal without disturbing piping. Centerline mounting minimises thermal growth misalignment at high temperatures.

Hydraulic & Rotor Design

  • Double suction first stage impeller – provides inherently low NPSH (NPSHr) and complete axial thrust balance, eliminating the need for complex thrust balancing devices.

  • Classically stiff shaft with heavy‑duty shaft as required by API 610 – minimal deflection ensures long mechanical seal and bearing life, even under high nozzle loads.

  • Standard impellers: Nss (suction specific speed) below 11,000. For lower NPSH requirements, the CD engineered pump version offers higher Nss impellers.

  • Optional “Coke Crusher” feature – proven design for services where coke particles or solids may be present (e.g., delayed coker units).

Sealing & Flange Ratings

  • Full compliance with ISO 21049 (API 682) – seal chamber dimensions and configurations accept any API 682 cartridge mechanical seal.

  • Standard flanges: ANSI B16.5 Class 300 raised face.

  • For higher pressures: Class 600 and Class 900 are available on the CD engineered pump version. (Refer to Section B of Sulzer ePM for pressure‑temperature ratings).

Bearing System

  • Standard (API 610 compliant):

    • 7300 series 40° duplex angular contact thrust bearings with machined brass cages

    • Heavy‑duty ball radial bearings with C3 internal clearance

  • Optional bearing systems: Sleeve/Ball and Sleeve/Pivot Shoe (for extreme high speed or heavy loads)

  • Optional lubrication systems: various lube systems available (oil mist, forced oil, etc.)

  • Standard bearing isolators: INPRO™ (non‑contact labyrinth seals)

  • Cooling options:

    • Bearing cooling fan (air cooled)

    • Finned tube water‑cooling inserts installed in bearing housing reservoir

    • Heat sink fan

    • Slotted bearing brackets for improved convection

Additional Features

  • Maximum component interchangeability within the BBS line – reduces spare parts inventory.

  • Designed to accommodate high temperatures and high suction pressures – robust construction for severe service conditions.

Typical Applications

  • Crude oil charge pumps in refineries

  • High temperature transfer of hot oils, gas oils, and residues

  • Hydrotreating and hydrocracker feed services

  • Heavy crude pipeline boosters

  • Any API 610 BB2 service requiring double suction, low NPSH, and high reliability

Why Choose Hyrig for the Sulzer Type BBS Pump?
Hyrig supplies high‑quality, fully interchangeable alternatives to the Sulzer BBS API 610 BB2 pump. Our pumps meet all API 610 requirements for nozzle loads, shaft stiffness, sealing, bearings, and vibration. With double suction impeller design, multiple nozzle configurations, and optional CD hydraulics for lower NPSH, the BBS platform delivers exceptional reliability in continuous refinery service. We offer complete engineering support, material upgrades (duplex, stainless steels, chrome steels), and seal plan customisation.

Need a technical datasheet, cross‑sectional drawing, or a quotation for the Sulzer Type BBS?
Contact us: info@hyrig.com – we respond within 24 hours.


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit