The Injection Water Pump GSG 80‑260L is a horizontal, single‑stage, end‑suction centrifugal pump specifically engineered for high‑pressure water injection applications. It is widely used in oilfield water flooding, reservoir pressure maintenance, produced water reinjection, and industrial process water injection systems. The “L” version indicates an optimised hydraulic layout for higher flow or lower NPSH requirements compared to the standard 260 model.
Key Technical Parameters
| Parameter | Value |
|---|---|
| Model | Injection Water Pump GSG 80-260L |
| Pump type | Horizontal single‑stage end‑suction, back pull‑out |
| Outlet size | DN80 (80 mm) |
| Impeller diameter | 260 mm (L‑variant with modified hydraulics) |
| Flow range | 60 – 150 m³/h |
| Head range | 60 – 140 m (0.6 – 1.4 MPa) |
| Speed | 2900 rpm (50 Hz) |
| Efficiency | 78% – 85% (BEP) |
| Shaft power | 18.5 – 55 kW |
| Motor power | 22 – 75 kW, IE3 / IE4 available |
| Max working pressure | 2.5 MPa |
| Temperature range | -20°C to 120°C |
| Materials | Casing: Ductile iron / 316 SS; Impeller: 304/316 SS / bronze |
| Seal options | Single or dual mechanical seal (SiC/SiC or carbon/ceramic) |
Design & Performance Features
High‑pressure hydraulic optimisation – the 260L impeller design delivers stable head and efficiency across a wide flow range, with low NPSHr for demanding suction conditions.
Back pull‑out (back‑pull‑out) construction – complete rotor can be withdrawn without disconnecting piping, significantly reducing maintenance downtime.
Material flexibility – wetted parts available in ductile iron (epoxy coated), 304 SS, or 316 SS to suit fresh water, produced water, or slightly corrosive injection fluids.
Mechanical seal options – single cartridge seal for clean water, or dual pressurised seal for produced water with sand or light hydrocarbon carryover.
Heavy‑duty bearing frame – designed for continuous operation in harsh environments; >8000 hours MTBF.
Fully compliant with EN 733 (DIN 24255) – standardised dimensions, high parts interchangeability, low spare parts cost.
Typical Applications
Oilfield water injection (secondary recovery / pressure maintenance)
Produced water reinjection
Industrial cooling water injection
Desalination plant high‑pressure feed
Industrial cooling water circulation
Why Choose Injection Water Pump GSG 80‑260L for Water Injection?
It combines reliable high‑pressure performance, easy back‑pull‑out maintenance, and material choices that resist corrosion and erosion. The pump reduces unplanned downtime and total cost of ownership, making it a trusted solution for oil & gas operators and industrial facilities.
Contact
For technical datasheets, pump selection assistance, or quotation:
info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.