LP Lean Amine Pump GSG40-180 – Complete Product Introduction

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
LP Lean Amine Pump GSG40‑180 is a horizontal single‑stage end‑suction centrifugal pump designed for low‑pressure lean amine service. Flow up to 50 m³/h, head up to 40 m. Back pull‑out construction enables maintenance without pipe removal. All wetted parts in 304/316 stainless steel. Perfect for amine sump transfer, regeneration loop circulation, and filter feed duties. EN 733 (DIN 24255) compliant.

Conatct For Details
DetailReview(0)Additional

The LP Lean Amine Pump GSG40‑180 is a horizontal, single‑stage, end‑suction centrifugal pump engineered for low‑pressure lean amine circulation in gas processing, refining, and chemical plants. It reliably transfers regenerated lean MDEA/DEA from amine sumps, regeneration tower bottoms (low head), or filter feed applications where moderate flow and low pressure head are required. The GSG40‑180 is the compact, cost‑effective member of the GSG family, designed for duties that do not demand the high head of larger models.

Key Technical Parameters

ParameterValue
ModelLP Lean Amine Pump GSG40-180
Pump typeHorizontal single‑stage end‑suction, back pull‑out
Outlet sizeDN40 (40 mm)
Impeller diameter180 mm
Flow range15 – 50 m³/h
Head range20 – 40 m (0.2 – 0.4 MPa)
Speed2900 rpm (50 Hz)
Efficiency65% – 75% (BEP)
Shaft power3 – 7.5 kW
Motor power4 – 11 kW, IE3 / IE4 available, optional explosion‑proof
Max working pressure1.6 MPa
Temperature range-20°C to 105°C
MaterialsCasing / Impeller: 304 or 316 stainless steel
Seal typeSingle mechanical seal (SiC/SiC or carbon/ceramic), optional dual seal

Design & Performance Features

  • Low‑pressure hydraulic optimisation – 180 mm impeller delivers stable, low‑head performance with excellent suction characteristics, ideal for low‑pressure amine circuits.

  • Back pull‑out (back‑pull‑out) construction – full rotor can be withdrawn without disconnecting piping, reducing maintenance downtime and costs.

  • Corrosion‑resistant materials – all wetted parts in 304/316 stainless steel, fully compatible with lean MDEA, DEA, and other mildly corrosive amine solutions.

  • Single mechanical seal (standard) – SiC/SiC faces, proven for clean lean amine service. Dual seal or flushed options available for higher safety requirements.

  • Compact footprint – small baseplate and motor size, easy to install in space‑limited areas or modular skids.

  • Compliant with EN 733 (DIN 24255) – standardised dimensions, good parts interchangeability within GSG series.

Typical Applications

  • Low‑pressure lean amine circulation (amine sump to regenerator or absorber)

  • Amine filter feed pump

  • Lean amine transfer between storage tanks

  • Small‑scale gas sweetening units (biogas, natural gas)

  • Refinery amine regeneration loop (low head section)

Why Choose LP Lean Amine Pump GSG40‑180 for Low‑Pressure Amine Service?

It provides the right head and flow range specifically for low‑pressure amine duties, avoiding oversizing and energy waste. The corrosion‑resistant stainless steel construction ensures long life in amine service, while the back pull‑out design simplifies maintenance. Compact, reliable, and economical – it is the ideal choice for low‑head lean amine transfer.

Contact

For technical datasheets, selection assistance, or quotation:
info@hyrig.com


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit