The HP Lean Amine Pump GSG80‑260 is a horizontal, single‑stage, end‑suction centrifugal pump specifically engineered for high‑pressure lean amine circulation in gas processing, refining, and petrochemical plants. It reliably delivers regenerated lean MDEA/DEA from the regenerator bottom to the high‑pressure absorber, ensuring efficient H₂S and CO₂ removal and preventing catalyst poisoning in hydrocrackers and hydrogenation units. This pump is the workhorse of amine sweetening systems where high head and moderate flow are required.
Key Technical Parameters
| Parameter | Value |
|---|---|
| Model | HP Lean Amine Pump GSG80-260 |
| Pump type | Horizontal single‑stage end‑suction, back pull‑out |
| Outlet size | DN80 (80 mm) |
| Impeller diameter | 260 mm |
| Flow range | 50 – 120 m³/h |
| Head range | 80 – 160 m (0.8 – 1.6 MPa) |
| Speed | 2900 rpm (50 Hz) |
| Efficiency | 75% – 82% (BEP) |
| Shaft power | 18.5 – 45 kW |
| Motor power | 22 – 55 kW, IE3 / IE4 explosion‑proof, IP55 |
| Max working pressure | 2.5 MPa |
| Temperature range | -20°C to 105°C |
| Materials | Casing / Impeller: 304 or 316 stainless steel (316 SS recommended) |
| Seal type | Dual mechanical seal (SiC/SiC), balanced, with support system |
Design & Performance Features
High‑pressure hydraulic optimisation – 260 mm impeller delivers high head with low NPSHr and excellent anti‑cavitation performance, critical for hot amine service.
Back pull‑out (back‑pull‑out) construction – complete rotor can be withdrawn without disconnecting piping, significantly reducing maintenance downtime.
Corrosion‑resistant materials – all wetted parts in 316 stainless steel, fully compatible with lean MDEA/DEA containing trace H₂S and CO₂, ensuring long service life.
Dual mechanical seal (standard) – SiC/SiC faces, balanced design for high‑pressure amine service, preventing fugitive emissions and meeting environmental regulations. Support system (API Plan 11 or 52) available.
Heavy‑duty bearing frame – designed for continuous operation in harsh refinery environments; >8000 hours MTBF.
Fully compliant with EN 733 (DIN 24255) – standardised dimensions, high parts interchangeability within GSG series, low spare parts inventory.
Typical Applications
Natural gas sweetening (amine absorption towers)
Refinery hydrotreating units (HDS, HCU)
Sulfur recovery unit (SRU) amine circulation
High‑pressure CO₂ capture with MDEA
Syngas purification in ammonia/methanol plants
Why Choose HP Lean Amine Pump GSG80‑260 for High‑Pressure Amine Service?
It combines high head capability, corrosion resistance, easy back‑pull‑out maintenance, and long MTBF. The dual mechanical seal and robust materials ensure safe, leak‑free operation in demanding amine service. This pump reduces energy consumption and unplanned downtime, making it the trusted choice for operators seeking reliable, low‑lifecycle‑cost amine circulation.
Contact
For technical datasheets, pump selection assistance, or quotation:
info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.