Rich Amine Pump OHH 1.5x3x8 – Complete Product Introduction

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
Rich Amine Pump OHH 1.5x3x8 is a horizontal heavy‑duty centrifugal pump engineered for rich amine (MDEA/DEA loaded with H₂S/CO₂). Flow to 150 m³/h, head to 250 m. API 610 OHH construction, back pull‑out, dual mechanical seal, and alloy wetted parts (Duplex / 316 / Alloy 20). Designed for high‑pressure, corrosive rich amine service in amine regeneration units.

Conatct For Details
DetailReview(0)Additional

The Rich Amine Pump OHH 1.5x3x8 is a horizontal, heavy‑duty, single‑stage end‑suction centrifugal pump specifically engineered for rich amine circulation in gas sweetening, refinery amine regeneration, and sulfur recovery units. It transfers amine solution loaded with absorbed H₂S and CO₂ from the absorber bottom to the regenerator (stripper). The “OHH” designation indicates an API 610 compliant overhung heavy‑duty pump (Type OH2 equivalent), designed for severe service conditions including high pressure, elevated temperature, and sour corrosion.

The model number 1.5x3x8 follows industry convention:

  • 1.5” – discharge nozzle size (DN40)

  • 3” – suction nozzle size (DN80)

  • 8” – nominal impeller diameter (approx. 203 mm)

Key Technical Parameters

ParameterValue
ModelRich Amine Pump OHH 1.5x3x8
Pump typeHorizontal single‑stage end‑suction, API 610 OH2 (overhung, heavy duty)
Suction sizeDN80 (3 inch)
Discharge sizeDN40 (1.5 inch)
Impeller diameter203 mm (8 inch)
Flow range30 – 150 m³/h (typical)
Head range150 – 250 m (1.5 – 2.5 MPa)
Speed2950 – 3550 rpm (50/60 Hz)
Efficiency70% – 80% (BEP)
Shaft power30 – 90 kW
Motor power37 – 110 kW, IE3 / IE4, explosion‑proof for Class I Div 1/2
Max working pressure4.0 – 5.0 MPa (depending on casing rating)
Temperature range-20°C to 150°C
Materials (wetted parts)Casing / Impeller / Wear rings: Duplex stainless steel (ASTM A995 4A / 5A), 316 SS, Alloy 20, or Hastelloy C‑276 for severe sour service
Seal typeDual pressurised mechanical seal (API Plan 52 or 53B), SiC/SiC or SiC/carbon, with seal support system

Design & Performance Features

  • API 610 compliant – heavy‑duty, centreline mounted (optional), designed for continuous sour service in refineries and gas plants. Meets API 682 for seal systems.

  • Sour service materials – rich amine contains dissolved H₂S, which causes stress corrosion cracking (SCC). Standard materials: Duplex or Super Duplex stainless steel, optionally Alloy 20 or Hastelloy for extreme H₂S/chloride environments.

  • High head capability – up to 250 m (2.5 MPa), suitable for sending rich amine from low‑pressure absorber to high‑pressure regenerator or cross‑exchange.

  • Back pull‑out design – maintenance without disturbing pipework, improving plant uptime.

  • Dual mechanical seal with API support system – standard API Plan 52 (unpressurised buffer fluid) or Plan 53B (pressurised barrier fluid) for zero leakage and long seal life in sour, hazardous service.

  • Heavy‑duty bearing housing – large oil‑lubricated bearings with constant level oiler and cooling (fan or water), designed for >25,000 hours L10 bearing life.

  • Optional centreline mounting – for high‑temperature applications (>120°C), casing expands without misaligning the shaft.

Typical Applications

  • Rich amine transfer from absorber to regenerator (amine sweetening unit)

  • Refinery amine regeneration loop (sour water stripping)

  • Sulfur recovery unit (SRU) tail gas treating amine circulation

  • High‑pressure CO₂ absorption with MDEA (where rich amine requires high head)

  • Sour water injection (produced water with H₂S)

Why Choose Rich Amine Pump OHH 1.5x3x8 for Rich Amine Service?

Rich amine is significantly more corrosive and hazardous than lean amine due to dissolved acid gases (H₂S, CO₂). This pump is specifically built to API 610 standards for sour service, with corrosion‑resistant alloys, dual pressurised seals, and heavy‑duty bearings. It delivers the high head often required to overcome exchanger and tower pressure drop in the regeneration loop. The API design ensures reliability, safety, and long life in the world’s most demanding amine units.

Contact

For API datasheets, material recommendations (Duplex / Alloy 20 / Hastelloy), seal system selection, or quotation:
info@hyrig.com



Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit