The Sour Water Pump OHH 3x4x7.5 is a horizontal, heavy‑duty, single‑stage end‑suction centrifugal pump specifically engineered for sour water service in refineries, gas processing plants, and petrochemical facilities. It reliably transfers water containing dissolved hydrogen sulfide (H₂S), ammonia (NH₃), and other sour gas components – typically from a sour water accumulator or collection drum to the sour water stripper for H₂S removal. The “OHH” designation indicates an API 610 compliant overhung heavy‑duty pump (OH2 equivalent), designed for severe sour, corrosive, and hazardous service conditions.
The model number 3x4x7.5 follows industry convention:
3” – discharge nozzle size (DN80)
4” – suction nozzle size (DN100)
7.5” – nominal impeller diameter (approx. 190 mm)
Key Technical Parameters
| Parameter | Value |
|---|---|
| Model | Sour Water Pump OHH 3x4x7.5 |
| Pump type | Horizontal single‑stage end‑suction, API 610 OH2 (overhung, heavy duty) |
| Suction size | DN100 (4 inch) |
| Discharge size | DN80 (3 inch) |
| Impeller diameter | 190 mm (7.5 inch) |
| Flow range | 50 – 200 m³/h (typical) |
| Head range | 100 – 180 m (1.0 – 1.8 MPa) |
| Speed | 2950 – 3550 rpm (50/60 Hz) |
| Efficiency | 75% – 83% (BEP) |
| Shaft power | 30 – 110 kW |
| Motor power | 37 – 132 kW, IE3 / IE4, explosion‑proof for Class I Div 1/2 |
| Max working pressure | 3.5 – 4.5 MPa (depending on casing rating) |
| Temperature range | -20°C to 150°C (up to 180°C with optional centreline mounting) |
| Materials (wetted parts) | Casing / Impeller / Wear rings: Duplex stainless steel (ASTM A995 4A / 5A), optionally Super Duplex or Alloy 20 |
| Seal type | Dual pressurised mechanical seal (API Plan 52 or 53B), SiC/SiC or SiC/carbon, with seal support system |
Design & Performance Features
API 610 compliant (OH2) – heavy‑duty, centreline mounted (optional for high temperature), designed for continuous sour water service meeting refinery reliability standards (minimum 25,000 hours bearing life).
Sour service materials – sour water contains H₂S, NH₃, and cyanides (in some refineries), which cause stress corrosion cracking. Standard material: Duplex stainless steel (excellent resistance to chloride and H₂S SCC). Super Duplex or Alloy 20 available for severe conditions.
High flow, moderate head – the 3x4 configuration (larger suction than discharge) ensures excellent NPSH performance and handles the typical flow/head requirements of sour water stripper feed service.
Back pull‑out design – rotor can be withdrawn without disturbing piping, reducing maintenance downtime in turnaround‑sensitive refinery environments.
Dual mechanical seal with API support system – standard API Plan 52 (unpressurised buffer fluid with vapour alarm) or Plan 53B (pressurised barrier fluid) for zero leakage of hazardous H₂S‑containing water. Seal faces: SiC/SiC for abrasive sour water (contains iron sulfide particles).
Heavy‑duty bearing housing – large oil‑lubricated rolling element bearings, constant level oiler, cooling fan (or water cooling), and vibration/temperature monitoring provisions.
Optional centreline mounting – for applications above 120°C (e.g., hot sour water stripper bottoms recycle), the casing is centreline‑mounted to maintain alignment during thermal expansion.
Typical Applications
Sour water stripper feed pump (refinery)
Sour water collection and transfer (from hydrotreater, coker, or FCC unit)
Amine regeneration sour water recycle
Gas plant sour water disposal / injection
Produced water reinjection with H₂S content
Why Choose Sour Water Pump OHH 3x4x7.5 for Sour Water Service?
Sour water is among the most challenging refinery streams – it is corrosive, toxic, often contains abrasive iron sulfide particles, and can flash when pressure drops. This pump is built to API 610 standards for reliability and safety in hazardous service. The duplex stainless steel construction resists H₂S‑induced cracking, the dual pressurised seal prevents fugitive emissions, and the back pull‑out design simplifies maintenance. With flow up to 200 m³/h and head to 180 m, it is perfectly sized for typical sour water stripper feed duties.
Contact
For API datasheets, material selection (Duplex vs Super Duplex vs Alloy 20), seal system design, or quotation:
info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.