The TMC series is a domestic API610 (10th/11th/12th edition) compliant VS4 vertical suspended single‑casing double‑volute long‑shaft barrel pump. It is specifically engineered for oily wastewater, slop oil, crude oil, condensate, and light‑solids containing liquids in refinery sumps, oilfield pit tanks, crude oil storage tank farms, underground rainwater basins, and coal chemical plants – handling low NPSH, cavitation‑prone, space‑limited and flammable conditions.
Oily wastewater, slop oil, crude oil, diesel, gasoline, high temperature condensate, tower bottom liquid, oily water with solid particles (≤3 mm).
Capacity: 5 – 800 m³/h
Head: single stage 50–250 m; multistage up to 800 m
Design pressure: 2.5 – 10 MPa (PN25 – PN100)
Temperature: -80°C to +180°C (high temp option to 400°C)
Immersion depth: standard 3–6 m (customizable up to 10 m)
Flange rating: ANSI Class 150 – Class 600 (PN20 – PN110)
Speed: 1450 / 2950 r/min
Single casing, double volute (DN80 and above) – balances radial forces, low vibration, high efficiency; independent discharge column minimizes hydraulic loss.
Modular long shaft with multi‑point support – high rigidity shaft design, high critical speed, stable operation; rotor can be withdrawn without removing pump casing – easy maintenance.
First stage low NPSH impeller – optional double suction impeller or inducer significantly reduces NPSHr, ideal for low liquid level oily water service.
Self‑balancing axial thrust – back‑to‑back impellers or balance drum for multistage; reduces bearing load, extends life.
Heavy duty barrel / casing – cast steel or stainless steel, hydrotest 1.5x design pressure.
API682 cartridge mechanical seal – Plan 11/21/53 as per duty, long‑term zero leakage for oily wastewater.
Product lubricated line shaft bearings – with external flush option for sandy/particle service; independent internal lube system ensures bearing life.
Barrel / casing: Cast steel (WCB), stainless steel (304/316L), duplex (CD4MCU)
Impeller / diffuser: Stainless steel, duplex, wear‑resistant alloy
Shaft seal: API682 cartridge seal (SiC/graphite/FKM)
Bearings: Product lubricated line shaft bearings + heavy duty oil‑lubricated thrust bearings
NACE MR0175 / ISO 15156 available for sour service.
✔︎ True API610 VS4 – vertical barrel, wet pit installation, designed for low NPSH and cavitation resistance
✔︎ Double volute design – radial force balance, low vibration, high efficiency, long bearing life
✔︎ Excellent low NPSH performance – optional inducer / double suction first stage, ideal for NPSHa < 3 m
✔︎ High rigidity shaft – modular multi‑point support, stable operation, high critical speed
✔︎ Wear resistant design – wear resistant alloy + replaceable wear rings for solids up to 3 mm
✔︎ Easy maintenance – rotor pull‑out without removing casing or piping, reduces downtime
✔︎ Zero leakage sealing – API682 cartridge seal with Plan 53 for reliable containment
✔︎ Cost‑effective domestic alternative – 30%–50% lower cost than Sulzer VSS, Flowserve VS4, KSB VUP, same API610 compliance
✔︎ Fast delivery – 12–16 weeks standard
✔︎ Proven references – Sinopec, CNPC, Zhejiang Petrochemical, Hengli Petrochemical
Oily wastewater sump / slop oil pit – TMC VS4 single stage, flow 100–800 m³/h, head 50–150 m, immersion 3–6 m
Deep pit / low liquid level (NPSHa < 3 m) – TMC VS4 multistage + inducer, high head up to 800 m, strong anti‑cavitation
Oily water with sand/particles – wear‑resistant alloy impeller + product lubricated line shaft bearings with external flush option
Spare parts for oily water sump pumps, slop oil transfer, crude oil tank farm drainage, underground pit dewatering
12–16 weeks delivery for engineered VS4 pumps
Full documentation: performance curves, NPSH test reports, material certificates (EN10204 3.1), hydrotest, API682 cert, NACE (if required)
Long‑term service agreement and on‑site support available
For API610 VS4 oily wastewater vertical barrel pump datasheet, low NPSH sump pump quotation, or refinery tank farm project support, please contact us:
info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.