The LG series is a domestic API610 (8th–12th edition) compliant VS1/VS4 vertical suspended barrel pump (long‑shaft vertical pump). It is specifically engineered for oily wastewater, crude oil, slop oil, condensate, and light‑solids containing liquids in refinery sumps, oilfield pit tanks, crude oil storage tank farms, underground rainwater basins, and coal chemical plants – handling low NPSH, cavitation‑prone, space‑limited and flammable conditions.
Oily wastewater, crude oil, slop oil, diesel, gasoline, high temperature condensate, tower bottom liquid, oily water with solid particles (≤3 mm).
Capacity: 5 – 3000 m³/h
Head: single stage 50–250 m; multistage up to 1400 m
Design pressure: 2.5 – 10 MPa (PN25 – PN100)
Temperature: -80°C to +250°C (high temp option to 400°C)
Immersion depth: standard 3–6 m (customizable up to 10 m)
Flange rating: ANSI Class 150 – Class 600 (PN20 – PN110)
Speed: 1450 / 2950 r/min
Single casing, radial diffuser, multistage in series – high head, low NPSH
Discharge through riser pipe – suitable for deep wells / deep sumps
Optional first stage double suction impeller or inducer – significantly reduces NPSHr for low liquid level oily water service
Single casing, double volute design – balances radial forces, low vibration
Long shaft with line shaft bearings – independent discharge column, high efficiency
Modular shaft assembly – rotor can be withdrawn without removing pump casing – easy maintenance
Heavy duty barrel / casing – cast steel or stainless steel, hydrotest 1.5x design pressure
API682 cartridge mechanical seal – Plan 11/21/53 as per duty, long‑term zero leakage for oily wastewater
Self‑balancing axial thrust – back‑to‑back impellers or balance drum for multistage
Heavy duty thrust bearings (oil bath lubrication)
Line shaft bearings – product lubricated or external flushing options for sandy/particle service
Barrel / casing: Cast steel (WCB), stainless steel (304/316L), duplex (CD4MCU)
Impeller / diffuser: Stainless steel, duplex, wear‑resistant alloy
Shaft seal: API682 cartridge seal (SiC/graphite/FKM)
Bearings: Product lubricated line shaft bearings + heavy duty oil‑lubricated thrust bearings
NACE MR0175 / ISO 15156 available for sour service.
✔︎ True API610 VS1/VS4 – vertical barrel, wet pit installation, designed for low NPSH and cavitation resistance
✔︎ Dual configuration – VS1 for high head (multistage up to 1400 m), VS4 for large flow (double volute, low vibration)
✔︎ Excellent low NPSH performance – optional inducer / double suction first stage, ideal for NPSHa < 3 m
✔︎ Wear resistant design – wear resistant alloy + replaceable wear rings for solids up to 3 mm
✔︎ Easy maintenance – modular rotor pull‑out without removing piping, reduces downtime
✔︎ Zero leakage sealing – API682 cartridge seal with Plan 53 for reliable containment
✔︎ Cost‑effective domestic alternative – 30%–50% lower cost than Sulzer VSS, Flowserve VS1/VS4, KSB VUP, same API610 compliance
✔︎ Fast delivery – 12–16 weeks standard
✔︎ Proven references – Sinopec, CNPC, Zhejiang Petrochemical, Hengli Petrochemical
Oily wastewater sump / slop oil pit – VS4 single stage, flow 100–1000 m³/h, head 50–150 m, immersion 3–6 m
Deep pit / low liquid level (NPSHa < 3 m) – VS1 multistage + inducer, high head, strong anti‑cavitation
Oily water with sand/particles – wear‑resistant alloy impeller + product lubricated line shaft bearings with external flush option
Spare parts for oily water sump pumps, slop oil transfer, crude oil tank farm drainage, underground pit dewatering
12–16 weeks delivery for engineered VS1/VS4 pumps
Full documentation: performance curves, NPSH test reports, material certificates (EN10204 3.1), hydrotest, API682 cert, NACE (if required)
Long‑term service agreement and on‑site support available
For API610 VS1/VS4 oily wastewater vertical barrel pump datasheet, low NPSH sump pump quotation, or refinery tank farm project support, please contact us:
info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.