The API 610 Chemical Pump is a heavy‑duty centrifugal pump designed strictly to API 610 11th/12th Edition (ISO 13709) standards for handling corrosive chemical media, including acids, alkalis, salts, solvents, corrosive slurries, toxic, and hazardous liquids. Engineered for corrosion resistance, reliable sealing, zero leakage, and long‑term continuous operation, it is available in OH2 (overhung), BB2 (between‑bearings), and VS4 (vertical suspended) configurations. The pump family offers full dimensional and performance interchangeability with Sulzer, Flowserve, and ITT Goulds equivalent models, making it a core process pump for chemical, petrochemical, fine chemical, metallurgical, and environmental applications.
| API 610 Type | Flow range (m³/h) | Head range (m) | Temperature range (°C) | Pressure rating (MPa) |
|---|---|---|---|---|
| OH2 | 5 – 2000 | 10 – 300 | –100 to 250 | ≤ 6.3 |
| BB2 | 50 – 8000 | 30 – 600 | –100 to 300 | ≤ 10.0 |
| VS4 | 10 – 800 | 10 – 150 | –40 to 180 | ≤ 2.5 |
Speed: 1450 / 2950 rpm (customizable)
Efficiency: Optimized hydraulics with smooth, non‑clogging flow passages
Acid, alkali, salt solution transfer (sulfuric acid, hydrochloric acid, caustic soda, brine, etc.)
Organic solvents, alcohols, esters, aromatics handling
Chemical plant process feed, reflux, circulation
Fine chemical, pesticide, pharmaceutical intermediate transfer
Metallurgical hydrometallurgy, electroplating wastewater, desulfurization/denitrification media
Safe handling of toxic, hazardous, volatile chemicals
Hyrig’s API 610 chemical pumps are direct drop‑in replacements for the following world‑leading brands – no baseplate or piping modifications required:
| API 610 Type | Sulzer | Flowserve | ITT Goulds |
|---|---|---|---|
| OH2 | CPE / ZPP | Durco Mark 3 / XD | 3196 / 3700 |
| BB2 | MBN / CPD | SIHI BB2 / CPX | BB2 Series / 4200 |
| VS4 | VMS | Limitorque VS4 | VS4 Sump Pump |
Interchange advantages:
Identical centerline mounting, flange dimensions, shaft diameter, and seal chamber
Performance deviation ≤3% across all hydraulic parameters
Interchangeable wear parts (mechanical seals, bearings, impellers)
Wide material selection – carbon steel, 304/316L stainless steel, duplex, Hastelloy, titanium, etc., for aggressive chemicals
Reliable sealing system – API 682 mechanical seals, low leakage, safe, environmentally friendly
Smooth, dead‑free flow passages – resists crystallization, scaling, and contamination
Rigid shaft design – low vibration, smooth operation, suitable for long‑term continuous service
Good NPSH characteristics – handles low boiling point, volatile chemicals
Full brand interchangeability – flexible selection, low maintenance cost, high reliability
Hyrig specializes in API 610 standard process pumps (OH2, BB2, BB5, VS6). Our core strength is providing complete drop‑in replacements for Sulzer, Flowserve, and Goulds. Every pump is manufactured to exact OEM interface dimensions, ensuring seamless installation.
We offer:
Identical performance – verified by hydraulic testing
Same quality – ISO 9001, API 610, and customer‑specified corrosion‑resistant materials
Full compliance – with all applicable industry standards
Better cost‑effectiveness – up to 30% savings compared to original OEM quotes
Shorter delivery times – expedited schedules available for critical projects
For inquiries, please contact us at: info@hyrig.com
HYRIG API 610 OH2 Centrifugal Process Pump – Reliable Replacement for Sulzer, Flowserve & ITT Goulds
HYRIG API 610 VS6 Vertical Barrel Pump – Direct Replacement for Sulzer, Flowserve & ITT Goulds
Direct Drop-in Replacements for Sulzer, Flowserve & Goulds API 610 Pumps (OH2, BB2, BB5, VS6)
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.