The ASP5320 series is a domestic API610 (8th/9th/10th edition) compliant BB2 horizontal radially split between‑bearing centrifugal pump. It is specifically engineered for oily wastewater, crude oil, refined products (diesel/gasoline), high temperature tower bottom fluids, and chemical solvents in refineries, petrochemical plants, coal chemical units and oilfield gathering – handling flammable, corrosive and light‑solids media at medium‑high temperature and high pressure.
Oily wastewater, crude oil, diesel, gasoline, high temperature condensate, tower bottom oil, lean/rich amine, chemical solvents (with or without light solid particles).
Capacity: 5 – 3500 m³/h
Head: up to 650 m
Design pressure: single stage 11 MPa (110 bar); two/three stage 15 MPa (150 bar); maximum 35 MPa (350 bar) on request
Temperature: -80°C to +450°C
Flange rating: ANSI Class 300 – Class 900 (PN50 to PN150)
Speed: 1450 / 2950 r/min
Radially split casing + centerline mounting – casing splits horizontally, centerline support minimizes thermal expansion distortion, ideal for high temperature. Maintenance without removing suction/discharge piping.
Single/two/three stage options – single stage with double suction impeller (axial thrust self‑balanced); multi‑stage with back‑to‑back impeller arrangement for automatic thrust cancellation.
Double volute (twin‑volute) hydraulic design – balances radial forces, reduces vibration, extends bearing and seal life.
Heavy duty casing – cast steel or stainless steel, hydrotest pressure 1.5x design pressure.
API682 cartridge mechanical seal – Plan 11/21/23/53 as per duty, long‑term zero leakage for oily wastewater and hydrocarbon service.
Replaceable wear rings (impeller and casing) – low maintenance cost, extended pump life.
CFD optimized hydraulics – wide high‑efficiency zone, excellent cavitation resistance (low NPSH).
Between‑bearing support – rolling or sliding bearings (oil bath lubrication), high load capacity, ultra‑low vibration.
Casing: Cast steel (WCB), stainless steel (304/316L), duplex (CD4MCU)
Impeller: Stainless steel, duplex, wear‑resistant alloy
Shaft seal: API682 cartridge seal (SiC/graphite/FKM)
Bearings: Heavy duty rolling bearings with oil lubrication
NACE MR0175 / ISO 15156 available for sour service.
✔︎ True API610 BB2 – radially split, centerline mounted, double volute – built for demanding refinery/oilfield duty across all three API editions.
✔︎ Flexible stage count – single stage for medium head, two/three stages for high head up to 650 m.
✔︎ Double suction self‑balancing – no axial thrust load, lower vibration (single stage). Back‑to‑back impellers for multistage.
✔︎ Excellent wear resistance – replaceable wear rings + wear‑resistant alloy options for light solids.
✔︎ Ultra‑high pressure capability – available up to 35 MPa, suitable for severe injection or hydroprocessing services.
✔︎ High efficiency & low NPSH – CFD optimized hydraulics, wide operating window.
✔︎ Easy maintenance – radial split casing; no need to remove pipelines for rotor access.
✔︎ Zero‑leakage sealing – API682 cartridge seal, suitable for flammable/volatile hydrocarbons.
✔︎ Cost‑effective domestic alternative – 30%–50% lower price than imported BB2 pumps (Sulzer BBT, Flowserve BB2, KSB RPH), same API610 compliance, faster delivery.
✔︎ Proven references – large scale installations at Sinopec, CNPC, Zhejiang Petrochemical, Hengli Petrochemical.
Oily wastewater / crude oil transfer – single stage double suction: flow 100–1000 m³/h, head 50–200 m.
High temperature tower bottom / chemical process – two/three stage version for up to 650 m head, 450°C, 15 MPa.
Oily water with sand/particles – optional wear‑resistant alloy impeller + heavy‑duty wear rings.
Spare parts for oily wastewater treatment, crude oil transfer, high pressure tower bottom pumps, amine circulation
12–16 weeks delivery for engineered BB2 pumps
Full documentation: performance curves, NPSH test reports, material certificates (EN10204 3.1), hydrotest, API682 cert, NACE (if required)
Long‑term service agreement and on‑site technical support available
For API610 BB2 oily wastewater pump datasheet, high pressure crude oil transfer quotation, or refinery project support, please contact us:
info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.