The DSJH series is a domestic API610 (ISO 13709) compliant BB2 horizontal radially split between‑bearing single‑stage double‑suction centrifugal pump. It is specifically engineered for oily wastewater, crude oil, refined products (diesel/gasoline), condensate, and chemical solvents in oilfield gathering, refinery process, coal chemical plants, and power station medium‑high pressure water/circulation service – handling flammable, corrosive and light‑solids fluids at medium‑high temperature and pressure.
Oily wastewater, crude oil, diesel, gasoline, high temperature condensate, chemical solvents (with or without light solid particles).
Capacity: 84 – 1700 m³/h
Head: 39 – 280 m
Design pressure: 5 MPa (50 bar) standard, optional up to 11 MPa (110 bar)
Temperature: -80°C to +450°C
Flange rating: ANSI Class 300 – Class 600 (PN50 to PN110)
Speed: 1450 / 2950 r/min
Design life: ≥30 years, MTBF ≥3 years
Radially split casing + centerline mounting – casing splits horizontally, centerline support minimizes thermal expansion distortion, ideal for high temperature. Maintenance without removing suction/discharge piping.
Single‑stage double‑suction impeller – self‑balances axial thrust, no balance device needed.
Double volute (twin‑volute) hydraulic design – balances radial forces, reduces vibration, extends bearing and seal life.
Heavy duty casing – cast steel shell, hydrotest pressure 7 MPa (1.4x design).
API682 cartridge mechanical seal – Plan 11/21/23/53 as per duty, long‑term zero leakage for oily wastewater service.
Replaceable wear rings (impeller and casing) – low maintenance cost, extended pump life.
CFD optimized hydraulics – wide high‑efficiency zone, excellent cavitation resistance (low NPSH).
Between‑bearing support – rolling or sliding bearings (oil bath lubrication), high load capacity, ultra‑low vibration.
Casing: Cast steel (WCB), stainless steel (304/316L), duplex (CD4MCU)
Impeller: Stainless steel, duplex, wear‑resistant alloy
Shaft seal: API682 cartridge seal (SiC/graphite/FKM)
Bearings: Heavy duty rolling bearings with oil lubrication
NACE MR0175 / ISO 15156 available for sour service.
✔︎ True API610 BB2 – radially split, centerline mounted, double suction, double volute – built for demanding refinery/oilfield duty
✔︎ Double‑suction self‑balancing – no axial thrust load, lower vibration, longer bearing life
✔︎ Excellent wear resistance – replaceable wear rings + wear‑resistant alloy options for light solids
✔︎ High efficiency & low NPSH – CFD optimized hydraulics, wide operating window
✔︎ Easy maintenance – radial split casing; no need to remove pipelines for rotor access
✔︎ Zero‑leakage sealing – API682 cartridge seal, suitable for flammable/volatile hydrocarbons
✔︎ Cost‑effective domestic alternative – 30%–50% lower price than imported BB2 pumps (Sulzer BBT, Flowserve BB2, KSB RPH), same API610 compliance
✔︎ Fast delivery – 12–16 weeks standard
✔︎ Proven references – large scale installations at Daqing Oilfield, Shengli Oilfield, Zhejiang Petrochemical, Hengli Petrochemical
Oily wastewater / crude oil transfer – DSJH single‑stage double suction: flow 100–1000 m³/h, head 50–200 m
High‑temperature high‑pressure chemical process – DSJH high‑pressure version (11 MPa) for up to 450°C
Oily water with sand/particles – optional wear‑resistant alloy impeller + heavy‑duty wear rings
Spare parts for oily wastewater treatment, crude oil transfer, refinery process pumps
12–16 weeks delivery for engineered BB2 pumps
Full documentation: performance curves, NPSH test reports, material certificates (EN10204 3.1), hydrotest, API682 cert, NACE (if required)
Long‑term service agreement and on‑site technical support available
For API610 BB2 oily wastewater pump datasheet, crude oil transfer quotation, or refinery project support, please contact us:
info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.