HYRIG BB2 Hot Oil Pump – API 610 Radial Split Between-Bearing Centrifugal Pump for High Temperature Hot Oil Service

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG BB2 High-Temperature Hot Oil Pump: API 610 radial split between-bearing design. Flow up to 2600 m³/h, head 30-250 m, temp up to 450°C, design pressure up to 40 bar. Optimized for large capacity hot oil and thermal fluid systems in refineries, petrochemical plants, and heat recovery units. Centerline mounted, heavy duty bearings, API 682 high temperature mechanical seal.

Conatct For Details
DetailReview(0)Additional

Product Overview
The HYRIG BB2 Hot Oil Pump is a heavy-duty, single-stage, radial split, between-bearing centrifugal pump, fully compliant with API 610 (ISO 13709) standards. Specifically engineered for large capacity hot oil and organic heat transfer fluid circulation at elevated temperatures, this pump features a centerline mounted casing and between-bearing rotor support to handle the most demanding continuous high temperature applications.

Compared to overhung (OH) designs, the BB2 configuration provides superior rotor dynamics, lower vibration, and longer bearing life at high temperatures and higher flow rates. The HYRIG BB2 is the solution for refinery hot oil systems, chemical plant thermal fluid heaters, and concentrated solar thermal plants.

Key Technical Parameters

  • Pump Type: API 610 BB2 Radial Split, Single-Stage, Between-Bearing Centrifugal Pump

  • Flow Range: 30 – 2600 m³/h (higher upon request)

  • Head Range: 30 – 250 m (up to 400 m with multi-stage BB3 variant)

  • Working Temperature: Up to 450°C (higher with special alloys)

  • Design Pressure: Up to 40 bar

  • Structure: Centerline mounted casing, between-bearing support (two bearings on both sides of impeller)

  • Seal Standard: API 682 mechanical seal (high temperature arrangements: Plan 62 quenching, Plan 23 with external cooler)

  • Materials: Carbon steel (WCB/WCC), 12% chrome, or 316 stainless steel; bearing housing with water jacket cooling; optional steam jacketed casing

  • Application: Large capacity hot oil circulation, thermal fluid heaters, refinery hot oil systems, heat recovery, asphalt transfer

Key Features

  • API 610 BB2 Compliance – Meets highest international standards for heavy duty continuous service with robust rotor dynamics.

  • High Flow & High Temperature – Between-bearing design handles larger flows and higher temperatures than OH pumps with reduced vibration.

  • Thermal Stability – Centerline mounting allows casing to expand symmetrically, maintaining alignment at up to 450°C.

  • Superior Rotor Dynamics – Dual bearing support provides shorter span and higher stiffness, minimizing vibration and extending seal/bearing life.

  • High Temperature Sealing – API 682 Plan 62 with steam or water quench prevents coking; Plan 23 with external cooler for precise temperature control.

  • Easy Maintenance – Radial split casing allows rotor and seal inspection without removing pump from piping (partial disassembly).

  • Bearing Cooling – Water jacketed bearing housings standard for high temperature operation; optional air cooled fins for lower duties.

Typical Applications

  • Large capacity hot oil circulation in refinery heat transfer systems (crude unit, FCC, coker)

  • Thermal fluid heaters for petrochemical plant reactor heating

  • Concentrated solar thermal (CSP) heat transfer fluid circulation

  • Asphalt and heavy pitch transfer (with steam jacketed casing)

  • Heat recovery systems and waste heat boilers demanding high flow and high temperature

Why HYRIG?
HYRIG brings advanced BB2 engineering expertise to the most demanding high temperature pumping applications. Each BB2 Hot Oil Pump is designed with finite element thermal stress analysis, high stiffness shafts, cooled bearing housings, and API 682 optimized seal support systems. HYRIG BB2 pumps deliver decades of trouble-free service in petrochemical hot oil plants and refineries worldwide.

Contact Us
For technical quotation, rotor dynamics analysis, or custom engineered solutions for your large capacity hot oil system, please email us at: info@hyrig.com

Our engineering team will respond within 24 hours with a pump selection optimized for your thermal fluid properties and system requirements.


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit