HYRIG BB2 Residue Pump – API 610 Radial Split Between-Bearing Centrifugal Pump for Residue Service

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG BB2 Residue Pump: API 610 radial split between-bearing design for large capacity residue transfer. Flow up to 3000 m³/h, head up to 300 m, temp up to 450°C, design pressure up to 50 bar. Optimized for atmospheric residue, vacuum residue, reduced crude, and high viscosity heavy oils. Wear resistant materials, centerline mounted, dual bearing supports. Back pull-out design, API 682 high temp mechanical seal with quench.

Conatct For Details
DetailReview(0)Additional

Product Overview
The HYRIG BB2 Residue Pump is a heavy-duty, single-stage, radial split, between-bearing centrifugal pump, fully compliant with API 610 (ISO 13709) standards. Specifically engineered for large capacity atmospheric residue (AR), vacuum residue (VR), and reduced crude service in refineries and upgraders, this pump features a centerline mounted casing and between-bearing rotor support to handle the most severe bottom-of-barrel applications.

Residue pumps operate with high viscosity, elevated temperatures up to 450°C, and entrained coke fines or catalyst particles. The BB2 configuration provides superior rotor dynamics, lower vibration, and longer service life compared to overhung designs, especially at higher flow rates and pressures. The HYRIG BB2 Residue Pump is the preferred choice for large refinery residue transfer, feeding cokers, visbreakers, and residue upgrading units.

Key Technical Parameters

  • Pump Type: API 610 BB2 Radial Split, Single-Stage, Between-Bearing Centrifugal Pump

  • Flow Range: 50 – 3000 m³/h (higher upon request)

  • Head Range: 30 – 300 m (multi-stage BB3 available for higher heads)

  • Working Temperature: Up to 450°C

  • Design Pressure: Up to 50 bar

  • Viscosity: Suitable for highly viscous residues (up to 5000 cSt at pumping temperature)

  • Structure: Centerline mounted casing, between-bearing dual support

  • Seal Standard: API 682 mechanical seal with high temperature arrangements (Plan 62 quenching with steam or water; Plan 23 optional)

  • Materials: Carbon steel (WCB/WCC/WC6) with hard faced wear rings (stellite/tungsten carbide); 12% chrome or duplex trim; optional steam jacketed casing for cold start or viscosity reduction

  • Application: Atmospheric residue, vacuum residue, reduced crude, heavy fuel oil, bitumen, FCC slurry (with abrasion-resistant trim)

Key Features

  • API 610 BB2 Compliance – Highest international standard for heavy duty continuous refinery service.

  • High Capacity & High Pressure – Between-bearing design handles larger flows and higher pressures than OH pumps with reduced deflection.

  • Abrasion Resistance – Hardened chrome steel or tungsten carbide wear rings, throat bushings, and optional ceramic shaft sleeves to withstand coke fines and catalyst particles.

  • Thermal Stability – Centerline mounting allows casing to expand symmetrically, maintaining alignment at temperatures up to 450°C.

  • Superior Rotor Dynamics – Dual bearing support provides shorter bearing span, higher shaft stiffness, and lower vibration – extending seal and bearing life.

  • High Temperature Sealing – API 682 Plan 62 with steam or water quench prevents residue coking and seal face overheating.

  • Easy Maintenance – Radial split casing with back pull-out design allows rotor and bearing inspection without removing pump from piping.

  • Bearing & Housing Cooling – Water jacketed bearing housings standard; optional air cooled fins for moderate temperatures.

Typical Applications

  • Atmospheric residue pump from crude distillation unit feeding downstream units

  • Vacuum residue pump from vacuum tower bottom to coker, visbreaker, or fuel oil blending

  • Reduced crude transfer to residue upgrading units (hydrocracker, solvent deasphalting)

  • Heavy fuel oil shipping and circulation in tank farms

  • Bitumen and asphalt transfer with steam jacketed casing

  • FCC slurry recycle pump (with abrasion-resistant hard trim)

Why HYRIG?
HYRIG applies deep engineering knowledge to every BB2 Residue Pump. Designed with finite element stress analysis, hardened wear surfaces, high temperature API 682 quench seals, and water cooled heavy duty bearing housings, our pumps deliver exceptional reliability in the world's harshest residue services. HYRIG BB2 pumps are trusted in major refineries and oil sands operations for decades of continuous uptime.

Contact Us
For technical quotation, viscosity and solids analysis, or custom abrasion resistant solutions for your large capacity residue unit, please email us at: info@hyrig.com

Our engineering team will respond within 24 hours with a pump selection optimized for your specific residue properties and system requirements.


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit