BMV Series Hydraulic Motors | High Torque Disc Valve

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG can supply the BMV series hydraulic motors range. The BMV is a disc valve, high-pressure motor with radial ball-bearings, featuring a larger volume than the BMT series to handle even greater loads.
Conatct For Details
DetailReview(0)Additional

BMV Series Hydraulic Motors

HYRIG can supply the BMV series hydraulic motors range. The BMV is a disc valve, high-pressure motor with radial ball-bearings, featuring a larger volume than the BMT series to handle even greater loads.

With displacements ranging from 315 ml/r to 1000 ml/r, the BMV series delivers exceptionally high torque (up to 2015 N·m). The advanced disc distribution flow design provides improved performance at low speed, and the valve automatically compensates for wear. Double taper roller bearings permit high radial loads, making these motors ideal for heavier vehicles in traction drive applications.

Key Facts

  • Type: Large volume, disc valve motor
  • Displacement Range: 315 ml/r to 1000 ml/r
  • Max Continuous Pressure: Up to 21 MPa
  • Max Continuous Torque: Up to 2015 N·m
  • Design: Disc valve, double taper roller bearings
  • Performance: Higher torque than BMT series

BMV Series Specifications

Data source: Technical data table

Displacement (ml/r)Flow Cont. (LPM)Speed Cont. (RPM)Pressure Cont. (MPa)Torque Cont. (N·m)
31516051021920
400200500211180
500200400211460
630200320211660
800200250211880
1000200200212015

Note: Continuous data refers to the max value of operating motor continuously. A simultaneous max RPM and max pressure is not recommended.

Dimensions

The BMV series offers various flange and shaft combinations. Standard shafts include cylindrical and spline options.

Shaft TypeDescription
Shaft ACylinder shaft: Φ50x82, parallel key: 14x9x70, link thread: M12
Shaft BInvolute spline shaft: Φ53.975x82, 16teeth, DP8/16, link thread: 3/8-16UNC
Shaft CInvolute spline shaft: Φ53.975x82, 16teeth, DP8/16, link thread: M12

Cross-Reference & Replacement

When replacing an existing heavy-duty motor with the BMV series, verify:

  1. Torque Requirements: The BMV provides higher torque than the BMT, making it suitable for the heaviest loads.
  2. Flange Type: Check the pilot diameter and bolt circle pattern.
  3. Shaft Configuration: Ensure the keyway or spline matches your coupling.

Applications

The BMV series is widely used in heavy-duty applications:

  • Construction Machinery: Large wheel loaders, heavy excavators.
  • Agricultural Equipment: Large tractors, harvesters.
  • Material Handling: Heavy winches, cranes.

Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.

Selection Support

Need a specific displacement? Explore the individual models: BMV-500 Hydraulic Motor, BMV-800 Hydraulic Motor, or contact us for a custom design.

Frequently Asked Questions

Q: What is the maximum continuous torque of the BMV series?
The BMV series can deliver a maximum continuous torque of up to 2015 N·m (for the 1000 ml/r model).

Q: What is the difference between BMT and BMV?
The BMV series has a larger volume and can handle higher continuous pressure (up to 21 MPa), resulting in higher torque output compared to the BMT series.

Contact

For BMV series hydraulic motor selection, contact HYRIG: info@hyrig.com

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit