HYRIG can supply the BMV-500 hydraulic motor. As part of the BMV series, it is a large volume, disc valve, high-pressure motor designed to provide exceptionally high torque for demanding traction drive applications.
The BMV-500 features a displacement of 500 ml/r. It delivers a continuous torque of 1460 N·m at 21 MPa. The advanced disc distribution flow ensures high volumetric efficiency at low speeds, and the double taper roller bearings permit high radial loads.
Data source: Technical data table
| Parameter | BMV-400 | BMV-500 | BMV-630 |
|---|---|---|---|
| Displacement (ml/r) | 400 | 500 | 630 |
| Flow (LPM) - Cont. | 200 | 200 | 200 |
| Speed (RPM) - Cont. | 500 | 400 | 320 |
| Speed (RPM) - Int. | 600 | 480 | 380 |
| Pressure (MPa) - Cont. | 21 | 21 | 21 |
| Pressure (MPa) - Int. | 25 | 25 | 25 |
| Torque (N·m) - Cont. | 1180 | 1460 | 1660 |
| Torque (N·m) - Int. | 1410 | 1760 | 1940 |
Note: Continuous data refers to the max value of operating motor continuously. Intermittent data refers to the max value operating in 6 seconds per minute.
The BMV-500 is designed for heavy-duty drop-in replacement.
| Dimension Item | Standard Value (mm) |
|---|---|
| Mounting Flange | Square flange (4-Φ18, pilot Φ160) |
| Shaft (Cylindrical) | Φ50x82 mm (Parallel key 14x9x70) |
| Oil Port Thread | Standard heavy-duty options |
| Weight (Approx.) | 35.0 kg |
For more options, refer to the BMV Series Hydraulic Motors.
The BMV series features an advanced disc distribution flow design. The valve automatically compensates for wear, ensuring high volumetric efficiency over a long service life. The double taper roller bearings permit high radial loads, making this motor suitable for the heaviest vehicles in traction drive applications.
Looking for a compatible replacement for a 500 ml/r high torque motor? The BMV-500 is a direct alternative. Before ordering, verify:
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.
Not sure if the 500 ml/r displacement is right for your system? Tell us your required torque and RPM, and our engineers will help you confirm the correct model.
Q: What is the maximum continuous torque of the BMV-500?
The BMV-500 delivers a maximum continuous torque of 1460 N·m at a continuous pressure of 21 MPa.
Q: What type of bearings does this motor use?
The BMV-500 features double taper roller bearings specifically designed to permit high radial loads.
For BMV-500 hydraulic motor selection, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.