Product Name: Boiler Feedwater Pump – 4x6x10.5CZ MSD 13 Stage
Standard: API 610 11th Edition, Type BB3 (Axial Split, Between Bearings, Multistage)
Equivalent Series: Sulzer MSD / Hyrig MSD series
Overview
The 4x6x10.5CZ MSD is a horizontal, axially split, multistage centrifugal pump specifically engineered for boiler feedwater service. With 13 stages, it delivers the high differential pressure required to feed water into medium- to high-pressure steam boilers in power generation, cogeneration, and industrial plants.
Key Specifications
Nominal Diameters: 4″ discharge × 6″ suction × 10.5″ impeller nominal diameter
Number of Stages: 13
Flow Range (typical): 400–1200 GPM (90–270 m³/h) depending on impeller trim
Head Range (typical): 2000–3500+ ft (610–1067 m) – 13 stages
Speed: 2980 / 3560 rpm (50/60 Hz)
Design Pressure (MAWP): 1650 psig (114 bar) or higher upon request
Flange Rating: 4″ 900# – 1500# discharge, 6″ 300# – 900# suction (customizable)
Construction Features
Casing: Axial split design for easy internal inspection and rotor removal
Material (model code CZ): Typically 12% chrome (CA6NM) or carbon steel for boiler feedwater; 316SS available for high-purity water
Rotor: 13 closed impellers, keyed or shrink-fit on shaft
Axial Thrust Management: Balance drum or automatic balancing disc (depending on stage count and pressure)
Mechanical Seal: API 682 Plan 21/23/32 suitable for high-temperature water (up to 300°F+)
Applications
Boiler feedwater duty in thermal power plants (coal, gas, biomass)
Industrial boilers in refineries, petrochemical, steel mills
High-pressure water injection (non-amine, non-hydrocarbon)
Reverse osmosis (RO) high-pressure boost
Why Choose Hyrig for This Pump?
We manufacture and supply new MSD series multistage pumps fully compliant with API 610 BB3. The 4x6x10.5CZ 13-stage model is optimized for boiler feedwater with high efficiency and long MTBR. We also offer replacement parts (impellers, wear rings, balance drum, shaft) and field service. Stock of common components available.
Contact
For quotation, performance curve, or cross-section drawing, please email:
info@hyrig.com
*Hyrig – Engineered API 610 multistage pumps for boiler feed, amine charge, and high-pressure process services.*
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.