Product Overview
BOMCO TPC-200 ceramic liner – this is a premium fluid-end replacement part engineered exclusively for the BOMCO TPC-200 triplex mud pump (200 HP, medium-pressure drilling service). Our ceramic liner for BOMCO TPC-200 uses a ZTA (Zirconia Toughened Alumina) ceramic inner sleeve combined with a forged 45# carbon steel (AISI 1045) outer shell, perfectly balancing structural strength, extreme abrasion resistance, and corrosion protection. The liner is 100% OEM interchangeable with original BOMCO TPC-200 liners, making it ideal for onshore drilling, water well drilling, geothermal operations, and abrasive mud environments. All products are API 7K certified.
Core Specifications
| Parameter | Detail |
|---|---|
| Applicable Model | BOMCO TPC-200 Triplex Mud Pump (200 HP) |
| Material | Outer: Forged 45# Carbon Steel; Inner: ZTA Ceramic |
| Ceramic Hardness | 92 – 94 HRC |
| Steel Shell Hardness | HB 180 – 210 |
| Max Working Pressure | 35 MPa (5000 PSI) |
| Surface Finish | Mirror honing (Ra ≤ 0.4μm / 4-8 RMS) |
| Standard | API 7K Approved |
| Service Life | 3500+ operating hours (5-8x longer than bimetal/high-chrome liners) |
| Standard Bore Sizes | 100 mm, 110 mm, 120 mm, 130 mm (custom sizes available) |
| Stroke Length | 200 mm |
| Assembly | Hot-press interference fit, shoulder-locking design |
Key Product Advantages
Extreme Abrasion & Corrosion Resistance – The ZTA ceramic inner sleeve resists high-sand drilling mud, corrosive chemicals, chloride and sulfide media, eliminating rapid wear, scratches and pitting common in metal liners. Far superior to pure alumina or bimetal liners.
High-Strength Forged Steel Shell – 45# forged steel provides excellent hoop strength and fatigue resistance, preventing deformation, cracking or slippage under 5000 PSI pressure. The shoulder-locking design secures the ceramic sleeve in place.
Permanent Metallurgical Bond – Hot-press interference assembly creates a gap-free, permanent bond between steel and ceramic – no relative movement, ensures stable long-term operation and no leakage.
OEM Interchangeability & Easy Installation – Precision machined to original BOMCO TPC-200 dimensions for direct drop-in replacement, reducing downtime and installation cost.
Cost-Effective Longevity – Extends service life 5–8 times longer than traditional bimetal or high-chrome liners, cutting replacement frequency, maintenance labor and overall operation cost.
Application Scenarios
Onshore oil & gas drilling (small to medium rigs)
Water well and geothermal drilling
Small-scale offshore and coastal drilling
High-sand, abrasive drilling fluid environments
BOMCO TPC-200 mud pump maintenance and overhaul
Why Choose Our BOMCO TPC-200 Ceramic Liner?
Full compliance with API 7K global drilling standards.
ZTA ceramic balances high hardness and toughness (tougher than pure alumina).
Forged steel shell withstands TPC-200’s pressure and vibration.
Complete standard bore sizes (100–130 mm) plus custom size support.
Fast delivery, OEM quality, and professional after-sales technical support.
Installation & Maintenance Notes
Handle with soft padding; avoid dropping, striking or impact damage to ceramic sleeve.
Ensure perfect piston-liner alignment; check for eccentric wear after assembly.
Drain mud completely when idle below 0°C to prevent freezing and ceramic cracking.
Use wooden blocks for adjustment; never strike liner with hard metal tools.
Contact us today for a quote or to verify compatibility with your BOMCO TPC-200 mud pump.
Email: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.