Our API 610 wastewater pumps are heavy‑duty centrifugal pumps engineered specifically for the reliable transfer of BTX‑contaminated wastewater – a dilute aqueous stream containing low concentrations of benzene (0.14%), toluene (0.02%), and xylene (0.02%), with the balance being water – from collection sumps, accumulators, storage tanks, and process drains to treatment facilities in petrochemical plants, refineries, aromatics complexes, and industrial facilities. This wastewater stream is generated from various sources including aromatic extraction units, solvent recovery systems, condensate separation, and process washing operations.
The fluid is predominantly water with trace BTX compounds, characterized by moderate temperatures (typically 40‑90°C), variable flow rates, low NPSH availability, and potential corrosivity from dissolved gases (H₂S, CO₂) and aromatic hydrocarbons. Pumps for this service demand robust construction, reliable sealing to prevent fugitive emissions of volatile aromatic compounds, and materials resistant to corrosion from variable water chemistry. Manufactured in strict compliance with the latest edition of API 610 (ISO 13709), these pumps are designed for continuous, reliable, and safe operation. The API 610 standard provides three primary configurations – OH (Overhung), BB (Between Bearings), and VS (Vertically Suspended) – with selection based on flow rate, head, NPSH availability, and installation requirements.
API 610 Classifications for Wastewater Duties
BB – Between Bearings Pumps
For main high‑capacity wastewater transfer from collection systems to treatment facilities, BB pumps provide superior rotor stability and long‑term reliability. BB1 (axially split, double‑suction) and BB2 (radially split, single‑stage) configurations are commonly specified for flows from 50 to 3,000 m³/h and heads up to 200 metres. The between‑bearings arrangement minimises shaft deflection, extending seal and bearing life – critical for continuous wastewater transfer operations.
OH – Overhung Pumps
For moderate‑capacity wastewater transfer, booster duties, or smaller collection systems, OH pumps offer a compact and cost‑effective solution. The OH2 (horizontal, centreline‑mounted) and OH3 (vertical inline) subtypes are widely used for wastewater transfer from smaller sumps, recirculation loops, and auxiliary services. Centreline mounting accommodates thermal expansion. Their back‑pull‑out design allows easy seal and impeller maintenance without disturbing piping. Single‑stage OH pumps handle flows up to 1,500 m³/h and heads up to 180 metres.
VS – Vertically Suspended Pumps
In applications where wastewater is drawn from low‑NPSH sumps, underground tanks, or collection basins, VS pumps provide excellent suction performance. VS1 (vertical turbine) and VS4 (vertical sump) types submerge the impeller below the liquid level, eliminating cavitation and priming problems. Their vertical footprint saves valuable plot space in congested plant areas.
Key Performance & Design Features
Pressure Capability – Designed for discharge pressures from 5 barg up to 30 barg, matching treatment system requirements.
Flow & Head – Capacities from 10 m³/h to 3,500 m³/h; heads typically from 30 to 200 metres.
Temperature Range – Engineered for BTX‑contaminated wastewater from ambient to 90°C (194°F), with appropriate material selection.
NPSH Performance – VS and specially designed BB/OH pumps with inducers achieve low NPSH requirements, critical for sump and tank suction conditions.
Materials – Wetted parts in stainless steels (304L, 316L, duplex), and corrosion‑resistant alloys to withstand trace BTX compounds, H₂S, CO₂, and variable pH. Full NACE MR0175/ISO 15156 compliance available for sour service.
Sealing – API 682 mechanical seals – single or dual (tandem) seals depending on service requirements. Suitable flush plans (Plan 11, 13, 32, 53A/B) with cooling to maintain seal integrity and prevent leakage of volatile aromatic compounds.
Casing Design – Robust casings with replaceable wear rings; smooth internal surfaces to minimise fouling and scale deposition.
Bearing & Lubrication – Heavy‑duty rolling element or sleeve bearings with oil mist, forced oil, or grease; vibration and temperature monitoring for predictive maintenance.
Impeller Options – Closed impellers for efficient handling; open or semi‑open designs for streams with potential solids or fouling tendencies.
Typical Applications
BTX‑contaminated wastewater transfer from collection sumps to treatment facilities
Process wastewater pumping in aromatics extraction and solvent recovery units
Wastewater transfer to biological or chemical treatment systems
Industrial wastewater collection and transfer in petrochemical complexes
Water stream transfer from condensate separators and process drains
Industries Served
Petrochemicals (aromatics production, wastewater treatment)
Oil refineries (process wastewater handling)
Chemical processing (environmental compliance)
Industrial wastewater treatment facilities
Why Choose Our Wastewater Pumps?
With extensive experience in industrial wastewater handling and full API 610 compliance, we design and manufacture wastewater pumps that deliver exceptional reliability, safety, and efficiency. Every pump undergoes rigorous performance testing, hydrostatic tests, and comprehensive NDT inspections (radiographic, ultrasonic, dye penetrant) with complete documentation to meet the most stringent international specifications. We offer customised hydraulic designs, material selections, and seal systems to match your specific wastewater composition, operating pressure, and temperature. Our engineering support includes NPSH analysis, API 684 rotor dynamics, vapour pressure evaluation, and emissions control advisory to ensure long‑term, trouble‑free operation.
Contact Us
For technical datasheets, application engineering advice, or a project‑specific quotation, please contact us at:
info@hyrig.com
Rely on our API 610 wastewater pumps to deliver reliable, safe BTX‑contaminated wastewater transfer for your industrial processes.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.