Our API 610 fresh solvent pumps are heavy‑duty centrifugal pumps engineered specifically for the reliable transfer of fresh sulfolane solvent in aromatics extraction and extractive distillation units – critical processes in refineries and petrochemical plants for recovering high‑purity benzene, toluene, and xylenes (BTX) from reformate or pyrolysis gasoline. Sulfolane (tetrahydrothiophene‑1,1‑dioxide) is a polar aprotic solvent widely used in the Sulfolane process. Fresh sulfolane is introduced into the system to maintain solvent inventory and compensate for losses due to degradation, entrainment, or purge streams. The fresh solvent is typically a mixture of sulfolane and water, with a composition designed to optimize extraction performance.
Although fresh sulfolane is less corrosive than the circulating lean solvent, it still requires pumps with excellent corrosion resistance and reliable sealing to handle potential degradation products (SO₂, H₂S, organic acids) that may be present. Pumps for this service demand robust construction, reliable sealing, and stable flow control.
API 610 Classifications for Fresh Solvent Duties
BB2 – Between Bearings Pumps (Preferred for Main Solvent Transfer)
For the main fresh sulfolane transfer pump, the BB2 subtype (radially split, single‑stage or two‑stage, between‑bearings) is the preferred configuration. The radially split casing allows the pump to expand evenly with temperature without distorting internal clearances – critical when handling streams with significant temperature differentials. The between‑bearings arrangement provides exceptional rotor rigidity, minimising shaft deflection and vibration. Centreline support accommodates thermal expansion. Single‑stage BB2 pumps handle moderate to high flows (50‑1,500 m³/h) at heads up to 200 metres, while two‑stage variants cover higher head requirements.
OH – Overhung Pumps
In fresh solvent systems, OH pumps are typically employed for smaller transfer duties, booster services, or auxiliary applications where flows are lower. The OH2 (horizontal, centreline‑mounted) and OH3 (vertical inline) subtypes provide compact, cost‑effective solutions for auxiliary roles. Centreline mounting ensures thermal expansion does not misalign the pump and driver.
VS – Vertically Suspended Pumps
VS pumps are used where the solvent system has very low NPSH or where floor space is limited. VS1 (vertical turbine) and VS4 (vertical sump) types are utilised for sump duties and tank transfer applications. VS4 pumps are available with API 610 compliant designs for such services.
Key Performance & Design Features (BB2 Focus)
Temperature Capability – Engineered for sulfolane temperatures up to 180°C (356°F), with appropriate material selection and thermal expansion allowances.
Flow & Head – Capacities from 20 m³/h to over 1,500 m³/h; heads typically from 30 to 200 metres.
Corrosion Resistance – Wetted parts in duplex stainless steel (D‑1), super duplex stainless steel (D‑2), or 316L stainless steel (A‑8) to withstand sulfolane corrosion and potential degradation products (SO₂, H₂S, organic acids).
Erosion Resistance – Hard facing on wear rings and impeller shrouds to resist erosion from solid particles that may be present.
Casing Design – Radially split casing with centreline support to accommodate thermal expansion without distortion. Heavy‑wall construction for pressure integrity at elevated temperatures.
Sealing – API 682 mechanical seals (single, dual, or tandem) with appropriate flush plans – typically Plan 32 (clean injected flush) or Plan 53 (pressurised dual seal) – to prevent leakage of corrosive solvent.
Bearing & Lubrication – Heavy‑duty sleeve or rolling element bearings with forced oil or oil mist lubrication; bearing temperature and vibration monitoring for predictive maintenance.
Impeller Options – Closed impellers for efficient handling; all dynamically balanced per API 610.
Thermal Expansion – Adequate internal clearances, expansion joints, and flexible coupling designs to accommodate temperature gradients.
Typical Applications
Fresh sulfolane transfer to aromatics extraction (Sulfolane process) units
Solvent make‑up and inventory maintenance in extractive distillation columns
Fresh solvent introduction to solvent storage and circulation systems
Sulfolane transfer in aromatics complexes and petrochemical plants
Industries Served
Petrochemicals (aromatics production, BTX recovery)
Oil refineries (aromatics complexes)
Chemical processing (solvent extraction and purification)
Why Choose Our Fresh Solvent Pumps?
With deep expertise in corrosive solvent handling and full API 610 compliance, we design and manufacture fresh solvent pumps that deliver unmatched reliability, safety, and efficiency. Every pump undergoes rigorous hydrostatic testing, performance curve verification, mechanical running tests, and comprehensive NDT inspections (radiographic, ultrasonic, dye penetrant) with complete documentation to meet the most stringent owner‑operator specifications. We offer customised hydraulic designs, material upgrades (duplex, super duplex, or high‑alloy materials), and sealing arrangements tailored to your specific sulfolane composition, temperature, and operating conditions. Our engineering support includes API 684 rotor dynamics, thermal expansion analysis, and NPSH margin studies to ensure seamless, long‑term operation in the most demanding aromatics extraction services.
Contact Us
For technical datasheets, application engineering advice, or a project‑specific quotation, please contact us at:
info@hyrig.com
Trust our API 610 fresh solvent pumps to keep your aromatics extraction process running reliably and efficiently.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.