Steam Generator Blowdown Pumps – API 610 BB2, OH & VS

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
Our API 610 steam generator blowdown pumps are available in BB2, OH, and VS designs, specifically engineered for the reliable transfer of high‑temperature blowdown water from steam generators, waste heat boilers, and heat recovery steam generators (HRSGs) in power plants, refineries, and petrochemical facilities. BB2 pumps with radially split between‑bearings construction are the preferred choice for high‑temperature blowdown duty, delivering stable flow with excellent rotor rigidity and thermal expansion management. OH pumps serve smaller applications, while VS pumps handle low‑NPSH suction. Built with chrome‑moly, stainless, and high‑temperature alloys. Fully API 610/ISO 13709 compliant for long‑life, high‑temperature service.

Conatct For Details
DetailReview(0)Additional

Our API 610 steam generator blowdown pumps are heavy‑duty centrifugal pumps engineered specifically for the reliable transfer of high‑temperature blowdown water from steam generators, waste heat boilers, heat recovery steam generators (HRSGs), and fired steam generators in power plants, refineries, petrochemical plants, and industrial facilities. Steam generator blowdown is the continuous or intermittent removal of water from the steam generator to control dissolved solids, prevent scale formation, and maintain water chemistry within specification. The blowdown water is typically at elevated temperatures (up to 300°C) and pressures, and may contain dissolved solids, chemicals, and corrosive components that demand pumps with exceptional thermal stability, reliable sealing, and robust construction.

Manufactured in strict compliance with the latest edition of API 610 (ISO 13709), these pumps are designed for reliable, continuous operation under severe conditions. The API 610 standard provides three primary configurations – OH (Overhung), BB (Between Bearings), and VS (Vertically Suspended) – though the BB2 type (radially split, single‑stage or two‑stage) is the preferred choice for main high‑temperature blowdown duties due to its superior thermal expansion management and rotor stability.

API 610 Classifications for Steam Generator Blowdown Duties

  • BB2 – Between Bearings Pumps (Preferred for Main High‑Temperature Blowdown)
    For main steam generator blowdown water transfer, the BB2 subtype (radially split, single‑stage or two‑stage, between‑bearings) is the preferred configuration. The radially split casing is ideal for high‑temperature water service, allowing the casing to expand evenly with temperature without distorting internal clearances – critical when handling significant temperature differentials. The between‑bearings arrangement provides exceptional rotor rigidity, minimising shaft deflection and vibration. Single‑stage BB2 pumps handle moderate flows (50‑1,000 m³/h) at heads up to 200 metres, while two‑stage variants cover higher head requirements. Centreline or foot mounting options accommodate thermal expansion.

  • OH – Overhung Pumps
    In steam generator blowdown systems, OH pumps are typically employed for smaller blowdown duties, booster services, or auxiliary applications where temperatures and flows are moderate. The OH2 (horizontal, centreline‑mounted) and OH3 (vertical inline) subtypes provide compact, cost‑effective solutions for auxiliary roles. Centreline mounting ensures thermal expansion does not misalign the pump and driver.

  • VS – Vertically Suspended Pumps
    VS pumps are used in applications where blowdown water is drawn from low‑NPSH sumps, storage tanks, or collection vessels. VS1 (vertical turbine) and VS4 (vertical sump) types submerge the impeller below the liquid level, providing excellent NPSH performance and eliminating priming issues. Their vertical footprint saves valuable plot space.

Key Performance & Design Features (BB2 Focus)

  • Temperature Capability – Engineered for blowdown water temperatures up to 300°C (572°F), with appropriate material selection and thermal expansion allowances.

  • Flow & Head – Capacities from 20 m³/h to over 1,000 m³/h; heads typically from 30 to 200 metres.

  • Pressure Rating – Designed for discharge pressures up to 50 barg, matching blowdown system requirements.

  • Casing Design – Radially split casing with appropriate support (centreline or foot) to accommodate thermal expansion without distortion. Heavy‑wall construction for pressure integrity at elevated temperatures.

  • Materials – Wetted parts in chrome‑moly steels (ASTM A217 WC6/WC9), stainless steels (304L, 316L), duplex, or high‑temperature alloys to resist hot water corrosion, thermal fatigue, and scaling. Internal coatings optional for enhanced corrosion protection.

  • Sealing – API 682 mechanical seals (single, dual, or tandem) with appropriate flush and cooling plans – typically Plan 23 (cooled seal chamber), Plan 32 (clean flush), or Plan 53 (pressurised dual seal) – to maintain seal integrity at elevated temperatures.

  • Thermal Expansion – Adequate internal clearances, expansion joints, and flexible coupling designs to accommodate significant temperature gradients during startup and operation.

  • Bearing & Lubrication – Heavy‑duty sleeve or rolling element bearings with forced oil, oil mist, or grease lubrication; bearing temperature and vibration monitoring for predictive maintenance.

  • Impeller Options – Closed impellers for efficient handling; special hydraulics to minimise cavitation and maintain efficiency at elevated temperatures.

  • Solids Handling – Robust impeller and casing designs to handle minor solids and scale particles present in blowdown water.

Typical Applications

  • Steam generator blowdown water transfer to flash tanks and blowdown recovery systems

  • Waste heat boiler and HRSG blowdown pumping

  • Fired steam generator blowdown removal

  • High‑temperature water transfer in power generation and cogeneration plants

  • Industrial boiler and steam system blowdown

  • Blowdown water transfer to heat recovery and treatment systems

Industries Served

  • Power generation (thermal and combined cycle plants)

  • Oil refineries and petrochemicals (process steam generators)

  • Chemical processing (waste heat recovery)

  • Industrial boiler systems

  • Cogeneration and district heating facilities

Why Choose Our Steam Generator Blowdown Pumps?

With deep expertise in high‑temperature water handling and full API 610 compliance, we design and manufacture steam generator blowdown pumps that deliver unmatched reliability, safety, and efficiency. Every pump undergoes rigorous hydrostatic testing, performance curve verification, mechanical running tests, and comprehensive NDT inspections (radiographic, ultrasonic, dye penetrant) with complete documentation to meet the most stringent owner‑operator specifications. We offer customised hydraulic designs, material upgrades, and sealing arrangements tailored to your specific blowdown water properties, temperature, and operating conditions. Our engineering support includes API 684 rotor dynamics, thermal expansion analysis, and NPSH margin studies to ensure seamless, long‑term operation in the most demanding steam generator blowdown services.

Contact Us

For technical datasheets, application engineering advice, or a project‑specific quotation, please contact us at:

info@hyrig.com

Trust our API 610 steam generator blowdown pumps to keep your steam systems running reliably and efficiently.


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit