HYRIG can supply BZZ series hydraulic steering units as compatible replacements for Eaton Char-Lynn steering systems. These units are designed to match the performance, port sizes, and shaft interfaces of standard Char-Lynn configurations for drop-in replacement in agricultural and construction machinery.
Finding the right replacement for a worn or damaged Eaton Char-Lynn orbitrol can be time-consuming. The BZZ series offers a reliable, cost-effective alternative. Whether you are replacing a Char-Lynn 3 series, 6 series, or 10 series, understanding the cross-reference is the first step to getting your machine back to work.
This guide maps the most common BZZ series to their corresponding Eaton Char-Lynn displacement ranges.
| BZZ Series | Compatible Char-Lynn Range | Displacement Range | Typical Application |
|---|---|---|---|
| BZZ 010 Series | Char-Lynn 3 Series / 40 Series | 80 - 500 ml/r | Tractors, Combines, Wheel Loaders |
| BZZ 050 Series | Char-Lynn 6 Series | 50 - 63 ml/r | Small Tractors, Forklifts |
| BZZ 060 Series | Char-Lynn 10 Series (Integrated Valves) | 50 - 500 ml/r | Heavy Loaders, Cranes |
Note: The mapping above is a general guide. Exact compatibility depends on the specific port thread, shaft type, and system configuration of your original unit.
Replacing an old Char-Lynn unit? Here is what to check before ordering to ensure a drop-in fit:
These replacement units are commonly used in:
Disclaimer: Eaton and Char-Lynn are registered trademarks of Eaton Corporation. HYRIG is an independent supplier of compatible replacement products and is not affiliated with, authorized by, or endorsed by Eaton Corporation.
Not sure if the BZZ unit is a direct replacement for your specific Char-Lynn model? Tell us your original part number or machine model, and our engineers will confirm the exact BZZ configuration (system type, port, shaft) for you.
Q: Is this an original Eaton Char-Lynn product?
No. HYRIG supplies independent, compatible replacement steering units. We are not affiliated with Eaton Corporation.
Q: How do I know which BZZ series replaces my Char-Lynn?
Check the displacement and port size on your original unit. If it is an 80-500 ml/r unit with standard ports, the BZZ 010 series is usually the correct match. For integrated valve models, check the 060 series.
Q: Can I keep my original steering column?
Yes, as long as the spline interface matches. The BZZ standard 12-tooth spline is designed to mate with common Char-Lynn steering columns.
For BZZ replacement selection for your Eaton Char-Lynn unit, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.