Cameron 16251 Ram Packer | 7-1/16" 3/5M Type SS Blind

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG can supply the Cameron Type SS ram packer range and its spare parts. The Cameron 16251 is an NBR (Nitrile Rubber) blind ram packer designed for 7-1/16" 3,000 - 5,000 psi Type SS BOPs to fully seal the wellbore.
Conatct For Details
DetailReview(0)Additional

HYRIG can supply the Cameron Type SS ram packer range and its spare parts. The Cameron 16251 is an NBR (Nitrile Rubber) blind ram packer designed for 7-1/16" 3,000 - 5,000 psi Type SS BOPs to fully seal the wellbore.

Key Facts

  • Product Name: Cameron Type SS Ram Packer
  • Part Number: 16251
  • BOP Size: 7-1/16"
  • Pressure Rating: 3,000 - 5,000 psi
  • Ram Type: Blind (Full Closure)
  • Material: NBR (Nitrile Rubber)

Key Specifications

ParameterDetail
Part Number16251
Component TypeRam Packer (Blind)
Equipment TypeCameron Type SS Ram BOP
BOP Size7-1/16"
Working Pressure3,000 - 5,000 psi
MaterialNBR (Nitrile Rubber)
API StandardAPI 16A
Temperature Range-18°C to 121°C

Data source: Technical data table and official specifications.

Dimensions

ParameterDetail
BOP Size7-1/16"
Ram TypeBlind (No pipe bore)
WeightNot specified; confirm with supplier

Structure / Working Principle

In a Cameron Type SS BOP, the blind ram packer has no center bore, allowing it to completely shut off and seal an empty wellbore. The pressure-energized design uses wellbore pressure to assist the elastomer in maintaining a tight seal.

Cross-Reference & Replacement

When replacing the 16251 ram packer, verify the part number against your equipment manual.

Alternative Sizes:

Selection Support

Not sure which ram packer size fits your drill string? Provide your pipe size and BOP model. HYRIG will confirm the correct Cameron Type SS ram packer.

Applications

Suitable for Cameron Type SS ram BOPs (7-1/16" 3/5M) in well control operations where full wellbore closure is required.

Spare Parts

HYRIG provides replacement ram packers for Cameron Type SS BOPs.

Frequently Asked Questions

What does "Blind" mean for a ram packer?
A blind ram packer has no hole in the center, allowing the rams to fully close and seal an empty wellbore.

Can this be used for H2S service?
Yes, HNBR and other elastomer options are available for H2S service. Contact HYRIG for specific material requests.

*Disclaimer: This equipment is designed for high-pressure and hazardous well control applications. Ensure strict compliance with local safety standards and verify pressure ratings and API certifications prior to installation.*

Contact

HYRIG is a China-based manufacturer and global supplier of well control equipment and elastomer spare parts. We can supply the Cameron 16251 blind ram packer. For selection support, contact HYRIG: info@hyrig.com

Page last updated: 2026-10-28

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit