HYRIG can supply the Cameron Type U shear BOP seal range and its spare parts. The Cameron 46751-01 is a right side packer designed for 13-5/8" 3-10M Type U shear rams, providing a critical seal after the shear blade cuts the pipe.
| Parameter | Detail |
|---|---|
| Part Number | 46751-01 |
| Component Type | Shear Ram Side Packer (Right) |
| Equipment Type | Cameron Type U Shear BOP |
| BOP Size | 13-5/8" |
| Working Pressure | 3,000 - 10,000 psi |
| Material | NBR (Nitrile Rubber) |
| API Standard | API 16A |
Data source: Technical data table and official specifications.
| Parameter | Detail |
|---|---|
| Ram Type | Shear Ram |
| Position | Right Side |
| Assembly Position | Installed adjacent to the shear blade |
| Weight | Not specified; confirm with supplier |
The right side packer works in tandem with the left side packer to seal the wellbore in a Cameron Type U shear BOP. As the rams close and the shear blade cuts the pipe, the right packer (46751-01) compresses against the BOP body to establish a high-pressure seal.
When replacing the shear ram components, it is highly recommended to inspect all three parts: the left packer, the right packer, and the shear blade.
Related Components:
Not sure if this fits your shear ram assembly? Provide your BOP model and ram type. HYRIG will confirm the correct Cameron parts.
Suitable for Cameron Type U shear BOPs (13-5/8" 3-10M) during emergency well control operations.
HYRIG provides replacement shear ram packers and blades for Cameron Type U BOPs.
How do I know if I need the left or right side packer?
The left and right packers are distinct parts. If you are replacing both, you need 46752-01 (Left) and 46751-01 (Right).
Can this be used for H2S service?
Yes, HNBR and other elastomer options are available for H2S service. Contact HYRIG for specific material requests.
What is the difference between the side packer and the shear blade?
The side packers are the elastomer seals, while the shear blade is the metal component that cuts the pipe.
*Disclaimer: This equipment is designed for high-pressure and hazardous well control applications. Ensure strict compliance with local safety standards and verify pressure ratings and API certifications prior to installation.*
HYRIG is a China-based manufacturer and global supplier of well control equipment and elastomer spare parts. We can supply the Cameron 46751-01 right side packer. For selection support, contact HYRIG: info@hyrig.com
Page last updated: 2026-10-28
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.